|
|
|
부품번호 | MA03501D 기능 |
|
|
기능 | X-Band Gain/Phase Control MMIC | ||
제조업체 | Tyco Electronics | ||
로고 | |||
RO-P-DS-3004 - -
X-Bandwww.DataSheet4U.com Gain/Phase Control MMIC
8.0 –11.0 GHz
Features
♦ 8.0 to 11.0 GHz Operation
♦ 6-bit Phase Shifter and 5-bit Attenuator
♦ Serial Control Input
♦ 50 Ω Input and Output Impedance
♦ Self-Aligned MSAG® MESFET Process
Primary Applications
♦ Radar Systems
8.0-11.0 GHz Serial Input Control MMIC
Description
The MA03501D is a serial control input phase shifter/
attenuator/buffer amplifier MMIC. The on-chip serial to
parallel converter circuitry allows for control of the 6
phase and 5 attenuation bits using a single TTL/CMOS
compatable input. This product is fully matched to 50
ohms on both the input and output.
Each device is 100% RF tested on wafer to ensure
performance compliance. The part is fabricated using
M/A-COM’s repeatable, high performance and highly
reliable GaAs Multifunction Self-Aligned Gate (MSAG®)
MESFET Process.
Electrical Characteristics: TB = 25°C1, Z0 = 50Ω, VDD = 5V, VGG = -4V, VEE = -4.0
Parameter
Symbol
Minimum
Typical
Maximum
Bandwidth
f 8.0
11.0
Gain
1-dB Compression Point
Gn
P1dB
13
18 22.5
21
Input Return Loss
IRL 10
16
Output Return Loss
ORL
10
16
Attenuation Range (5-bits, 0.75dB step)
23
RMS Attenuation Error (Uncorrected)
0.2
0.75 dB Attenuator Bit
0.5 0.8 1.0
1.5 dB Attenuator Bit
1.0 1.5 2.0
3 dB Attenuator Bit
2.4 3.0 3.6
6 dB Attenuator Bit
5.0 6.0 7.0
12 dB Attenuator Bit
10.8 12 13.2
Units
GHz
dB
dBm
dB
dB
dB
dB
dB
dB
dB
dB
dB
1. TB = MMIC Base Temperature
X-Band Serial Input Gain/Phase Control MMIC
RO-P-DS-3004 - - 4/7
MA03501D
Typical Small Signal Characteristics (VDD=5V, VGG=-4V)
22.0
21.0
20.0
19.0
18.0
17.0
16.0
15.0
14.0
8.0
8.5
9.0
9.5
10.0
10.5
11.0
Frequency (GHz)
Figure 1. Gain
-10.0
-12.0
S2 2 :
S11:
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0
8.0
8.5
9.0
9.5
10.0
10.5
11.0
Frequency (GHz)
Specifications subject to change without notice.
Figure 2. Input and Output Match
Customer Service: Tel. (888)563-3949
Email: [email protected]
North America: Tel. (800) 366-2266
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product informaVti1o.n00.
4페이지 X-Band Serial Input Gain/Phase Control MMIC
Assembly and Bonding Diagram
VGG
0.1 µF
100 pF
RO-P-DS-3004 - - 7/7
MA03501D
100 pF
0.1 µF
VDD
RFIN
RFOUT
100 pF
3 DATA
VEE
0.1 µF
Figure 5. Recommended bonding diagram.
Support circuitry typical of MMIC characterization fixture for CW testing.
Assembly Instructions:
Die attach: Use AuSn (80/20) 1-2 mil. preform solder. Limit time @ 300 °C to less than 5 minutes.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge bond techniques. For
DC pad connections, use either ball or wedge bonds. For best RF performance, use wedge bonds of
shortest length, although ball bonds are also acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
Specifications subject to change without notice.
Customer Service: Tel. (888)563-3949
Email: [email protected]
North America: Tel. (800) 366-2266
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Visit www.macom.com for additional data sheets and product informaVti1o.n00.
7페이지 | |||
구 성 | 총 7 페이지수 | ||
다운로드 | [ MA03501D.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MA03501D | X-Band Gain/Phase Control MMIC | Tyco Electronics |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |