|
|
|
부품번호 | GQ2163 기능 |
|
|
기능 | CMOS POSITIVE VOLTAGE REGULATOR | ||
제조업체 | GTM | ||
로고 | |||
www.DataSheet4U.com
ISSUED DATE :2004/11/12
REVISED DATE :
GQ2163
CMOS Po siti ve Vol tag e Regu l ato r
Description
The GQ2163 series of positive, linear regulators feature low quiescent current (30 A typ.) with low dropout
voltage, making them ideal for battery applications.
These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under
the “Worst” of operating conditions.
In applications requiring a low noise, regulated supply, place a 1000pF capacitor between Bypass and Ground.
The GQ2163 is stable with an output capacitance of 2.2 F or greater.
Features
Very Low Dropout Voltage
Guaranteed 300mA output
Over-Temperature Shutdown
Current Limiting
Short Circuit Current Fold-back
Highly Accurate± 1.5%
Noise Reduction Bypass Capacitor
Power-saving Shutdown Mode
Factor Pre-set Output Voltage
Applications
Battery Powered Widgets
Instrumentation
Wireless Devices
PC Peripherals
Portable Electronics
Cordless Phones
Electronic Scales
Package Dimensions
Functional Block Diagram
Typical Application Circuit
REF.
A
B
C
D
E
F
Millimeter
Min. Max.
2.70 3.10
2.60 3.00
1.40 1.80
0.30 0.55
0 0.10
0° 10°
REF.
G
H
I
J
K
L
Dimensions
Millimeter
1.90 REF.
1.20 REF.
0.12 REF.
0.37 REF.
0.60 REF.
0.95 REF.
1/7
ISSUED DATE :2004/11/12
REVISED DATE :
4/7
4페이지 ISSUED DATE :2004/11/12
REVISED DATE :
Detailed Description
The GQ2163 series of COMS regulators contain a PMOS pass transistor, voltage reference, error amplifier,
over-current protection, and thermal shutdown.
The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal
protection circuits. During normal operation, the error amplifier compares the output voltage to a precision
reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds
150 , or the current exceeds 300mA. During thermal shutdown, the output voltage remains low. Normal
operation is restored when the junction temperature drops below 120 .
The GQ2163 switches from voltage mode to current mode when the load exceeds the rated output current.
This prevents over-stress. The GQ2163 also incorporates current fold-back to reduce power dissipation when
the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces
the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts.
External Capacitors
The GQ2163 is stable with an output capacitance to ground of 2.2 F or greater. Ceramic capacitors have the
lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the
highest ESR, resulting in the poorest AC response. Unfortunately, large value ceramic capacitors are
comparatively expensive. One option is to parallel a 0.1 F ceramic capacitor with a 10 F Aluminum Electrolytic.
The benefit is low ESR, high capacitance, and low overall cost.
A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should
be at least 0.1 F to have a beneficial effect.
A third capacitor can be connected between the BY-PASS pin and GND. This capacitor can be a low cost
Polyester Film variety between the value of 0.001~0.01 F. A large capacitor improves the AC ripple rejection,
but also makes the output come up slowly. This “Soft” turn-on is desirable in some applications to limit turn-on
surges.
All capacitors should be placed in close proximity to the pins. A “Quiet” ground termination is desirable. This
can be achieved with a “Star” connection.
Enable
The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shuts off, and all
internal circuits are powered down. In this state, the quiescent current is less than 1 A. This pin behaves much
like an electronic switch.
Important Notice:
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM.
GTM reserves the right to make changes to its products without notice.
GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems.
GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C.
TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785
China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China
TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
7/7
7페이지 | |||
구 성 | 총 7 페이지수 | ||
다운로드 | [ GQ2163.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
GQ2163 | CMOS POSITIVE VOLTAGE REGULATOR | GTM |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |