R2A20111SP Datasheet PDF - Renesas Technology
| Part Number | R2A20111SP | |
| Description | Power Factor Correction Controller IC | |
| Manufacturers | Renesas Technology | |
| Logo |  |
|
|
There is a preview and R2A20111SP download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.com
R2A20111SP/DD
Power Factor Correction Controller IC
REJ03F0231-0100
Rev.1.00
Mar 28, 2007
Description
The R2A20111 is a power-factor correction (PFC) controller IC.
This IC adopts continuous conduction mode as PFC operation.
Various functions such as constant power limit, overvoltage detection, overcurrent detection, soft start, feedback-loop
disconnection detection, and holding function of PFC operation through momentary outage (PFC hold function) are
incorporated in a single chip. These functions reduce external circuitry.
The constant power limit function allows to eliminate a significant amount of coil noise which is generated due to
overcurrent detection operation in case of conventional overload.
The PFC hold function enables quick recovery by continuing PFC operation after momentary outage. The hold time
can be adjusted by an external capacitance.
Overcurrent detection pin is separately provided.
Latch mode shutdown function is incorporated.
A soft-start control pin provides for the easy adjustment of soft-start operation, and can be used to prevent overshooting
of the output voltage.
Features
• Maximum ratings
⎯ Power-supply voltage Vcc: 24 V
⎯ Operating junction temperature Tjopr: – 40 to 125°C
• Electrical characteristics
⎯ VREF output voltage VREF: 5.0 V ± 3%
⎯ UVLO operation start voltage VH: 10.5 ± 0.9 V
⎯ UVLO operation stop voltage VL: 9.0 ± 0.7 V
⎯ PFC output maximum ON duty Dmax-out: 95% (typ.)
• Functions
⎯ Constant power limit function
⎯ Continuous conduction mode
⎯ Hold function of PFC operation on momentary outage (PFC hold function)
⎯ Overvoltage detection
⎯ Overcurrent detection
⎯ Soft start
⎯ Feedback loop disconnection detection
⎯ IC shutdown function
⎯ Package lineup: SOP-16 and DILP-16
Applications
• Flat panel display
• Projector
• Desktop PC
• White goods
REJ03F0231-0100 Rev.1.00 Mar 28, 2007
Page 1 of 40
|
| |
 
R2A20111SP/DD
EO Pin:
This pin is the output of the voltage amplifier. This pin is connected to the phase-compensation circuit of the voltage
amplifier.
SS Pin:
This pin is connected to GND or VREF via a capacitor. This pin is pulled up to the voltage on the VREF pin until PFC
operation starts. When the voltage on the PFC-ON pin has reached 0.82 V (typ.), PFC operation starts and this pin
flows 25 μA source current. Operation of the CAO pin is affected by that of the SS pin, the pulse width of the OUT pin
is limited, and this prevents overshooting when start up.
VCC Pin:
This pin is for the IC power supply. The IC starts up at 10.5 V (typ.), and stops at 9 V (typ.).
REJ03F0231-0100 Rev.1.00 Mar 28, 2007
Page 5 of 40
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for R2A20111SP electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ R2A20111SP.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| R2A20111SP | The function is Power Factor Correction Controller IC. Renesas Technology | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
R2A2
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||