Datasheet.kr   

3HP04MH PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 3HP04MH
기능 P-Channel Silicon MOSFET
제조업체 Sanyo Semicon Device
로고 Sanyo Semicon Device 로고 


전체 4 페이지

		

No Preview Available !

3HP04MH 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Ordering number : ENA0445
3HP04MH
SANYO Semiconductors
DATA SHEET
3HP04MH
Features
4V drive.
P-Channel Silicon MOSFET
General-Purpose Switching Device
Applications
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Drain-to-Source Voltage
Gate-to-Source Voltage
Drain Current (DC)
Drain Current (Pulse)
Allowable Power Dissipation
Channel Temperature
Storage Temperature
Symbol
VDSS
VGSS
ID
IDP
PD
Tch
Tstg
Conditions
PW10µs, duty cycle1%
Mounted on a ceramic board (900mm2!0.8mm)
Ratings
--30
±20
--200
--800
0.6
150
--55 to +150
Unit
V
V
mA
mA
W
°C
°C
Electrical Characteristics at Ta=25°C
Parameter
Drain-to-Source Breakdown Voltage
Zero-Gate Voltage Drain Current
Gate-to-Source Leakage Current
Cutoff Voltage
Forward Transfer Admittance
Static Drain-to-Source On-State Resistance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Turn-ON Delay Time
Rise Time
Turn-OFF Delay Time
Fall Time
Marking : WZ
Symbol
Conditions
V(BR)DSS
IDSS
IGSS
VGS(off)
yfs
RDS(on)1
RDS(on)2
Ciss
Coss
Crss
td(on)
tr
td(off)
tf
ID=--1mA, VGS=0V
VDS=--30V, VGS=0V
VGS=±16V, VDS=0V
VDS=--10V, ID=--100µA
VDS=--10V, ID=--100mA
ID=--100mA, VGS=--10V
ID=--50mA, VGS=--4V
VDS=--10V, f=1MHz
VDS=--10V, f=1MHz
VDS=--10V, f=1MHz
See specified Test Circuit.
See specified Test Circuit.
See specified Test Circuit.
See specified Test Circuit.
min
--30
Ratings
typ
--1.2
150 250
1.4
2.8
22
6.0
3.5
34
59
435
250
max
--1
±10
--2.6
1.9
4.0
Unit
V
µA
µA
V
mS
pF
pF
pF
ns
ns
ns
ns
Continued on next page.
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
82306 / 62006PE MS IM TB-00002268 No. A0455-1/4




3HP04MH pdf, 반도체, 판매, 대치품
3HP04MH
Note on usage : Since the 3HP04MH is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of June, 2006. Specifications and information herein are subject
to change without notice.
PS No. A0445-4/4

4페이지













구       성총 4 페이지
다운로드[ 3HP04MH.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
3HP04MH

P-Channel Silicon MOSFET

Sanyo Semicon Device
Sanyo Semicon Device

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵