|
|
|
부품번호 | SD07Hxx 기능 |
|
|
기능 | (SD Series) Low Profile DIP Switches | ||
제조업체 | ITT Industries | ||
로고 | |||
www.DataSheet4U.com
C&K SD Series
Low Profile DIP Switches
Features/Benefits
• Low profile design saves space
• Thru-hole and surface mount models
• Tape and reel packaging available
• Sealed with top tape
• RoHS compliant - options available
Typical Applications
• Address switch for industrial
controls
• Logic switching for computers
and peripherals
• Function controlling for
numerous applications
I
How To Order
Complete part numbers for SD Series are shown on pages I–9 through I–11. All switches supplied in “OFF” position in rigid
dispensing tubes or tape and reel packaging.
Specifications
SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12
positions
CONTACT RATING:
Carry: 100 mA @ 50 V DC max.
Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max.
MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break
cycles at full load, each circuit.
CONTACT RESISTANCE: Below 50 milliohms typ. initial
@ 2-4 V DC, 100mA.
INSULATION RESISTANCE: 109 ohms min.
DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between
adjacent terminals.
STORAGE TEMPERATURE: -40°C to 85°C.
OPERATING TEMPERATURE: -20°C to 85°C.
OPERATING FORCE: 100-700g inital.
PACKAGING: Thru-hole switches supplied in rigid dispensing tubes in
full-tube quantities only: this may effect order quantity. Surface
mount switches available in tape and reel packaging by added ‘R’
to end of part number; 1,000 pieces per reel. Switch position 1
denotes pin number 1. All switch actuators in ‘OFF’ position,
standard.
Materials
CASE & COVER: Thru-hole: polyester (PBT). Surface mount: (PPA),
flame retardant (UL 94V-0).
ACTUATOR: Nylon, flame retardant (UL 94V-0)
CONTACTS: Copper alloy with gold plate.
TERMINALS:
Non-RoHS (K or KR ending part #’s) = Copper alloy with tin/lead plate.
RoHS version (B or BR ending part #’s) = bright tin-plated BeCu.
TERMINAL SEAL: All terminals insert molded.
TAPE SEAL: Polyester
NOTE: For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
Note: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Sealed Flush Actuator – With Top Tape, Thru-hole Terminals
Process sealed - withstands soldering and cleaning processes
.263
(6,68)
DIM. 'A'
SEE CHART
.027
(0,70)
ACTUATOR TRAVEL
Ø.038
(0,97)
TYP.
.300 TYP.
(7,6)
12345678
ORIENTATION MARK
PEELABLE
TAPE SEAL
.142
(3,62)
.168 TYP.
(4,30)
.100
(2,54)
TYP.
.315 TYP.
(8,00)
.023 TYP.
(0,60)
STANDOFF
.059 TYP.
(1,50)
.022 TYP.
(0,55)
.126 TYP.
(3,20)
.100 TYP.
(2,54)
.010 TYP.
(0,25)
.325 TYP.
(8,25)
ROHS
TIN LEAD
NO.
PART NUMBER PART NUMBER POS.
DIM. ‘A’
QUANTITY
PER TUBE
SD02H0B
SD03H0B
SD04H0B
SD05H0B
SD06H0B
SD07H0B
SD08H0B
SD09H0B
SD10H0B
SD12H0B
SD02H0K
SD03H0K
SD04H0K
SD05H0K
SD06H0K
SD07H0K
SD08H0K
SD09H0K
SD10H0K
SD12H0K
2 .258 (6,55)
3 .358 (9,09)
4 .458 (11,63)
5 .558 (14,17)
6 .658 (16,71)
7 .758 (19,25
8 .858 (21,79)
9 .958 (24,33)
10 1.058 (26,87)
12 1.258 (31,95)
85
60
45
40
30
25
25
20
20
15
Schematic
SPST
Dimensions are shown: Inch (mm )
Specifications and dimensions subject to change
I-9 www.ittcannon.com
| |||
구 성 | 총 3 페이지수 | ||
다운로드 | [ SD07Hxx.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
SD07Hxx | (SD Series) Low Profile DIP Switches | ITT Industries |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |