Datasheet.kr   

JAN1N6036 데이터시트 PDF




Microsemi Corporation에서 제조한 전자 부품 JAN1N6036은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 JAN1N6036 자료 제공

부품번호 JAN1N6036 기능
기능 (JAN1N60xx) BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR
제조업체 Microsemi Corporation
로고 Microsemi Corporation 로고


JAN1N6036 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

JAN1N6036 데이터시트, 핀배열, 회로
www.DataSheet4U.com
SCOTTSDALE DIVISION
1N6036 and 1N6072A
1500 WATT BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPRESSOR
DESCRIPTION
APPEARANCE
This popular Transient Voltage Suppressor (TVS) series for 1N6036 thru
1N6072A are JEDEC registered selections for bidirectional devices. All
have the same high Peak Pulse Power rating of 1500 W with extremely fast
response times. They are also available in military qualified selections as
described in the Features section herein. They are most often used for
protecting against transients from inductive switching environments,
induced RF effects, or induced secondary lightning effects as found in
lower surge levels of IEC61000-4-5. They are also very successful in
protecting airborne avionics and electrical systems. Since their response
time is virtually instantaneous, they can also protect from ESD and EFT per
IEC61000-4-2 and IEC61000-4-4.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
DO-13
(DO-202AA)
FEATURES
APPLICATIONS / BENEFITS
Bidirectional TVS series for thru-hole mounting
Suppresses transients up to 1500 watts @ 10/1000
µs (see Figure 1)
Clamps transient in less than 100 pico seconds
Working voltage (VWM) range 5.5 V to 185 V
Hermetic sealed DO-13 metal package
JAN/TX/TXV military qualifications also available per
MIL-PRF-19500/507 for the tighter tolerance “A”
suffix types by adding the JAN, JANTX, or JANTXV
prefix, e.g. JANTXV1N6036A, etc.
For unidirectional TVS in the same DO-13 package,
see separate data sheet for the 1N5629 – 1N5665A
series (also military qualified)
Surface mount equivalent packages also available
as SMCJ5.0C - SMCJ170CA or SMCG5.0C –
SMCG170CA in separate data sheet (consult factory
for other surface mount options)
Plastic axial-leaded equivalents available in the
1.5KE6.8C – 1.5KE220CA series in separate data
sheet
Protection from switching transients and induced RF
Protection from ESD and EFT per IEC 61000-4-2
and IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: 1N6036 to 1N6072A
Class 2: 1N6036 to 1N6067A
Class 3: 1N6036 to 1N6061A
Class 4: 1N6036 to 1N6054A
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1 : 1N6036 to 1N6064A
Class 2: 1N6036 to 1N6057A
Class 3: 1N6036 to 1N6049A
Class 4: 1N6036 to 1N6042A
Secondary lightning protection per IEC61000-4-5
with 2 Ohms source impedance:
Class 2: 1N6036 to 1N6048A
Class 3: 1N6036 to 1N6041A
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
1500 Watts for 10/1000 µs with repetition rate of 0.01%
or less* at lead temperature (TL) 25oC (see Figs. 1, 2, &
4)
Operating & Storage Temperatures: -65o to +175oC
CASE: DO-13 (DO-202AA), welded, hermetically
sealed metal and glass
FINISH: All external metal surfaces are Tin-Lead
plated and solderable per MIL-STD-750 method
THERMAL RESISTANCE: 50oC/W junction to lead at
0.375 inches (10 mm) from body or 110 oC/W junction to
ambient when mounted on FR4 PC board with 4 mm2
copper pads (1oz) and track width 1 mm, length 25 mm
DC Power Dissipation*: 1 Watt at TL < +125oC 3/8” (10
mm) from body (see derating in Fig 3 and note below)
Solder Temperatures: 260 o C for 10 s (maximum)
2026
POLARITY: Not applicable for bidirectional TVS
MARKING: Part number
WEIGHT: 1.4 grams. (Approx)
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
See package dimension on last page
* TVS devices are not typically used for dc power dissipation and are instead operated at or less than their rated standoff voltage
(VWM) except for transients that briefly drive the device into avalanche breakdown (VBR to VC region).
Copyright 2002
11-06-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1




JAN1N6036 pdf, 반도체, 판매, 대치품
www.DataSheet4U.com
SCOTTSDALE DIVISION
1N6036 and 1N6072A
1500 WATT BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPRESSOR
GRAPHS
100
Exponential wave-
form (See FIG. 2)
10
Square-wave pulse
1.0
Peak Value
IPP
Pulse time duration (tp) is
defined as that point where
IP decays to 50% of peak
value (IPP).
0.1kW
100ns
1µs
10µs
100µs
1ms
Pulse Time (tp)
FIG. 1 – Non-repetitive peak pulse power rating curve
NOTE: Peak power defined as peak voltage times peak current
10ms
time (t) in milliseconds
FIG. 2 Pulse wave form for exponential surge
TL – lead Temperature oC
FIG. 3 Steady-state power derating curve
PACKAGE DIMENSIONS
TA Ambient Temperature oC
FIG. 4 Derating Curve
DO-13
(DO-202AA)
Copyright 2002
11-06-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4

4페이지












구       성 총 4 페이지수
다운로드[ JAN1N6036.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
JAN1N6036

(JAN1N60xx) BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR

Microsemi Corporation
Microsemi Corporation

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵