|
|
|
부품번호 | NV-FJ604 기능 |
|
|
기능 | (NV-FJ604 - NV-FJ610) Video Recoder | ||
제조업체 | Panasonic | ||
로고 | |||
www.DataSheet4U.com
Video Cassette Recorder
NV-FJ610 Series
NV-FJ606 Series
NV-FJ604 Series
Operating Instructions
VQT8539
Before attempting to connect, operate or adjust this product,
please read these instructions completely.
www.DataSheet4U.com
Preparing the Remote
Control
VCR Operation
When you want to operate the VCR, set the VCR/TV switch N
to “VCR”.
°2 Numeric buttons
To select the programme positions (1–99) of the VCR.
Example:
09: 9
19: 1 9
To enter a ShowView number.
To enter numbers for various settings.
°6 No function
°= Tape Counter Reset button
To reset the tape counter (elapsed time) to “0:00.00”.
≥ The tape counter is automatically reset to “0:00.00”
when a video cassette is inserted.
°@ No function
Inserting Remote Control
Batteries
1 1 Slide off the battery cover.
2 2 Insert the batteries with the
polarity (+ and -) correctly
- aligned.
++
3-
3 Replace the battery cover.
°O Infra-red transmitter
°T Child Lock Function buttons
(Convenient function to prevent unauthorized use)
This function deactivates all buttons on the VCR and the
remote control. Use this function, when you do not want
other people to operate the VCR.
To Activate the Child Lock Function:
1 Hold down the OK and the OFF (i) buttons T
simultaneously until the “!" hold” indication appears
in the VCR display.
≥ If you press a button while the Child Lock function is
on, the “!" hold” indication appears in the VCR
display to inform you that no operation is possible.
VCR display
Notes for Battery Replacement:
≥ The service life of the batteries is approximately 1 year.
However, it varies considerably depending on the
frequency of use.
≥ When they are exhausted, replace them with two AA, UM3,
or R6 size batteries.
≥ When the batteries are exhausted, remove them
immediately and dispose of them correctly.
≥ Make sure that the batteries are inserted with the polarity
(+ and -) correctly aligned.
≥ Do not mix old battery with new battery.
≥ Do not mix different battery types, i.e. Alkaline and
Manganese.
≥ Do not use rechargeable (Ni-Cd) batteries.
≥ Do not heat or short-circuit the batteries.
≥ When you do not use the remote control for a long time,
take out the batteries and store them in a cool, dry place.
Indication when the Child Lock function is activated
To Cancel the Child Lock Function:
1 Hold down the OK and the OFF (i) buttons T
simultaneously until the “!" hold” indication
disappears.
≥ If you disconnect the power cable, the Child Lock
function is automatically cancelled after the power
backup time of approximately 60 minutes has
elapsed.
°Z Cassette compartment
°[ Infra-red Remote Control Receiver window
°] VCR display
If the Sliding Cover of the Remote Control
Becomes Detached
If the sliding cover of the remote control becomes detached
accidentally, fit it securely in place by placing it on the top of
the remote control at the position shown in the illustration
below, and pushing it down until it clicks into position.
≥ It is not possible to fit the sliding cover in place by pushing
or sliding it on from the bottom end of the remote control.
Correct
Wrong
4
4페이지 www.DataSheet4U.com
Connecting the VCR to a TV
Method 1. If you are connecting your VCR to a TV using RF coaxial cable and 21-pin Scart cable, then
follow the steps below. (AV Connection)
Aerial (not supplied)
c
`
Aerial lead
(not supplied)
TV (not supplied)
AC Input
socket _
Aerial Input
socket
d
AC Mains lead
(supplied)
21- Scart cable to AV1
(not supplied)
RF Coaxial cable (supplied)
≥ Must be connected to
watch TV channels even
if 21-pin Scart cable is
used to connect VCR to
TV.
21-pin Scart
socket
To AC Mains
socket
After completing the above connections, proceed to the Auto Setup page (Page 8).
or Method 2.
If you are connecting your VCR to a TV using only RF coaxial cable, then follow the
steps below. (RF Connection)
Aerial (not supplied)
AC Input
socket _
AC Mains lead (supplied)
c
Aerial lead
(not supplied)
TV (not supplied)
Aerial Input
socket
d
RF Coaxial cable (supplied)
≥ Must be connected to
watch TV channels.
To AC Mains
socket
After completing the above connections, proceed to the Auto Setup page (Page 9).
7
7페이지 | |||
구 성 | 총 34 페이지수 | ||
다운로드 | [ NV-FJ604.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
NV-FJ604 | (NV-FJ604 - NV-FJ610) Video Recoder | Panasonic |
NV-FJ606 | (NV-FJ604 - NV-FJ610) Video Recoder | Panasonic |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |