|
|
|
부품번호 | 5406552-4 기능 |
|
|
기능 | Modular Jacks | ||
제조업체 | Tyco | ||
로고 | |||
전체 30 페이지수
wwwwww.Da.DtaSahteaeSt4Uh.ecoemt4U.com
Modular Jacks and MRJ 21
Catalog 82066 Revised 6-05
wwwwww.Da.DtaSahteaeSt4Uh.ecoemt4U.com
Modular Jacks and MRJ 21
Introduction
Modular Jacks consist of
single or multi-port, stacked,
high performance, jacks
with LEDs, surface or pc
board mount, and shielded
or unshielded varieties.
They offer compact size,
high reliability and meet
FCC Rules and Regulations,
Part 68. The high perfor-
mance category 5 jacks
conform to TIA/EIA-568A
requirements. The housing
materials are available in
polyester for wave solder
applications and high tem-
perature Nylon, PCT or SPS
for IR reflow applications.
All housing materials are
UL 94V-0 flame retardant.
All shields consist of cop-
per alloy base metal with
tin-lead plating over copper
underplate. All contacts
are overall nickel plated
phosphor bronze, with
selectively plated gold in
the contact area, and tin-
lead in the solder area.
Single Port Modular Jacks
are available in both side or
top entry and shielded or
unshielded. The side entry
additionally comes in a vari-
ety of heights from 17.4mm
to 11.5mm. They are
designed for direct mount-
ing on pc boards and ease
of soldering and board
cleaning. The shielded
mod jacks are available with
and without panel grounds.
Multi-Port Modular Jacks
are for applications requir-
ing printed circuit board
mounted, shielded and
unshielded, ganged modu-
lar jacks. With industry pc
board footprints, these 8-
position right-angle jacks
can be designed into vari-
ous networking devices.
Stacked Modular Jacks
low profile and narrow width
allow more ports to be
packed into less space,
while the accurately posi-
tioned solder tails reduce
assembly labor. Low profile
stacked modular jacks
exceed Near End Crosstalk
(NEXT) requirements of
40db at 100 MHz, on all 4-
pair combinations. They are
available in both unshielded
and shielded versions.
Shielded modular jacks are
available with and without
panel grounds.
High Density CAT 5e
MRJ 21 is a fully shielded,
high density I/O intercon-
nect providing density/
space savings for current
10/100 or GbE RJ45/RJ21
applications. The cable
assembly requires 1/3 the
space of standard telecom
configurations using Mod
Plugs, MRJ 21, or RJ21
telecom connectors.
High Performance Modular
Jacks exceed Near End
Crosstalk (NEXT) require-
ments of -40dB at 100 MHz,
on all 4-pair combinations
and meet requirements of
FCC, Part 68. They are
available in single or multi-
port configurations, shielded
or unshielded. The need for
customized printed circuit
boards to achieve high
performance is eliminated.
LEDs integrated into the
modular jack eliminates the
need for additional system
space for indicators. The
modular jack now functions
as transmit/receive; line sta-
tus and collisions can be
identified by viewing LEDs
directly in each port. This
product is available in sin-
gle, ganged, and stacked
versions in a variety of LED
color combinations.
Surface Mount Modular
Jacks are available in
unshielded single and dual-
port varieties along with a
special invertible jack.
These jacks are tape and
reel packaged for automatic
pick and place applications.
MAG45
■ In December 2001,
Tyco Electronics acquired
Transpower Technologies,
a manufacturer of data-
com, telecom, and power
magnetic components. As
a result, Tyco Electronics
now offers a broad range
of RJ45 modular jacks with
integrated magnetics for
10 Base-T, 10/100 Base-T,
10/100/1000 Base-T, and
VOIP/Powered Ethernet
applications.
■ Configurations include
single port, multiport
(1x2, 1x4, 1x5, 1x6, 1x8),
stacked (2x1, 2x3, 2x4,
2x6, 2x8), and stacked
USB/RJ45. Integrated
LEDs are optional.
■ When specifying a
MAG45 connector, the
following information will
assist in determining the
correct part number for
the application:
■ What is the transmission
rate (10/100 Base-T,
10/100/1000 Base-T)?
■ Will the application
require power over
Ethernet capability?
■ What is the PHY
(Physical Layer)
Transceiver Chip? Is it
Auto-MDIX enhanced?
(Auto-sensing Media
Dependent Interface
Crossover)
■ Is an integrated 2 kV
de-coupling capacitor
desired?
■ Has a preferred electri-
cal pin-out (signal path)
been derived?
■ What is the connector
configuration (single
port, 1xN, 2xN,
USB/RJ45)?
■ Are integrated LEDs
required? If so, define
color
4
Catalog 82066
Revised 6-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
4페이지 wwwwww.Da.DtaSahteaeSt4Uh.ecoemt4U.com
Modular Jacks and MRJ 21
LED Modular Jacks
Product Facts
■ Meets or exceeds FCC Part
68 rules and regulations
with standard pc board
footprints
■ LEDs integrated directly into
jack, yet maintains compact
form
■ Unshielded and shielded
versions in popular size
configurations
■ Shielded jacks provide
grounding through panel
and pc board
■ LEDs located at top of jack
for effective visibility
■ Accurately positioned solder
tails reduce assembly labor
while selectively deposited
gold plating results in
lower cost
■ Listed by Underwriters
Laboratories Inc.,
File No. E81956
R
■ Certified by Canadian
Standards Association,
File No. LR 7189A
R
■ Produced under a Quality
Management System
Certified to ISO 9001
A copy of the
certificate is available
upon request
Specifications
Electrical
Current Rating — 1.5 amp max.
@ 25°C
Voltage Rating — 150 VAC max.
Dielectric Withstanding Voltage — 1000
VAC
Insulation Resistance —
500 megaohms min.
Shielding Effectiveness —
20dB min., 10 to 200 MHz
Material and Finish
Housing — High temperature Nylon
UL 94V-0 rated
Contact — .013 [0.33] Phosphor
bronze; plated .000050 [0.00127] gold
in localized area and .000150 [0.00381]
tin-lead on solder tails, over .000050
[0.00127] nickel underplate
Shield — .010 [0.25] copper alloy
tin-lead plated
Technical Documents
Application Specifications
114-2154
Product Specifications
108-01163-4
Mechanical
Durability — 750 mating cycles
Mating/Unmating Forces —
41¼2 lbs. max.
Operating Temperature —
40°C to 70°C
Catalog 82066
Revised 6-05
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
7
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ 5406552-4.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
5406552-4 | Modular Jacks | Tyco |
5406552-x | Modular Jacks | Tyco |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |