|
|
PDF MNA02 Data sheet ( Hoja de datos )
| Número de pieza | MNA02 | |
| Descripción | chip capacitor networks | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MNA02 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Ceramic capacitors
MNA02
(1005 (0402)×2 size, chip capacitor networks)
MNA02
zFeatures
Two multi-layer ceramic capacitors are integrated on a single chip providing reduced cost and mounting space.
zQuick Reference
The design and specifications are subject to change without prior notice. Please check the most recent technical
specifications prior to placing orders or using the product. For more detail information regarding packaging style code,
please check product designation.
zHigh dielectric constant
Part No.
Size code
Temperature characteristics
code
Operating temp. range
(°C)
Rated voltage
(V)
MNA02
1005x2
(0402x2)
CN
±15%
(X5R)
−25 to +85
6.3
Capacitance(pF)
1,000,000
Capacitance
tolerance
M(±20%)
Thickness
(mm)
0.8+0.05
−0.10
zExternal dimensions (Unit : mm)
1.37±0.15
0.36±0.1
0.64±0.1
C1 C2
C1 =C 2
zProduct designation
Part No.
Code Product thickness Packaging specifications
K 0.8mm Paper tape(width 8 mm, pitch 4 mm)
Reel(φ180mm) : compatible with EIAJ ET-7200A
Packaging style
Reel
φ180mm(7in.)
Basic ordering unit(pcs.)
4,000
MNA 0 2 8 CN 1 0 5 M K
Rated voltage
Code Voltage
8 6.3V
Temperature characteristic code
:Refer to quick reference table.
Nominal
Capacitance tolerance
capacitance Code
tolerance
3-digit designation M
according to IEC
±20%
1/6
1 page  
www.DataSheet4U.com
Ceramic capacitors
MNA02
No. Items
Performance
15 Heat life
test
Appearance Without mechanical damage.
Change
rate from Within +/−25.0%
initial value
Dielectric
loss
tangent
Less than 200% of initial spec.
Insulation
resistance
Not less than 10MΩ.
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
As per 4.23 of JIS C 5101-1.
As per 4.15 of JIS C 5101-10
Test
temperature
Voltage
Test
time (h)
85°C
Rated 1000
voltage +48/−0
Initial measurements prior to test shall be
made after the voltage pre-conditioning
specified in Remarks (2).
Final measurements shall be made after
the specimens have been left at room
temperature
Table 3
Characteristic
Time
CN 48+/−4 h
[Remarks]
Pre-conditioning
If specified in test method of as per 3(Performance and test method), capacitors of CNcharacteristics
shall be pre-conditionded as follows.
(1) Thermal pre-conditioning
Prior to initial measurements, specimens shall be conditioned at a temperature of 150 0/−10°C
for a period of 1hr., and shall be allowed to stabilize at room temperature for 48+/−4h
(2) Voltage pre-conditioning
Prior to initial measurements, voltage specified as a test condition shall be applied to specimens
for a period of 1hr., and the specimens shall be allowed to stabilize at room temperature for 48+/−4h
<Test jig>
Soldering
Glass epoxy
substrate
5/6
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet MNA02.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MNA02 | chip capacitor networks | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |