|
|
|
부품번호 | XC-EI51CE 기능 |
|
|
기능 | (XC-Exx1CE) CCD B/W Camera Module | ||
제조업체 | Sony | ||
로고 | |||
www.DBa/taWShVeeIDt4EU.OcomCAMERA MODULE
XC-ES50/ES50CE
XC-ES51/ES51CE
XC-ES30/ES30CE
*1 *2
TV
Format
1/3 Type
1/2 Type
Output CCD CCD
C
Lens Mount
VS
Output
HD VD Restart
External Sync Reset
Long
Exposure
Normal
Shutter
Mode 1
(Non-Reset Mode)
External
Trigger Shutter
Mode 2
(Non-Reset Mode)
External
Trigger Shutter
*1 :
*2 :
Outline
Connection Diagram P98
The XC-ES series is a small-sized lightweight monochrome
camera module designed as an input device for image
processing, realized through the newest high-density
packaging.
The downsized the main body allows to set the XC-ES series
easily at the places where is difficult to set the existing
devices
Features
■ XC-ES30/ES30CE :1/3 type IT CCD
■ XC-ES50/ES50CE :1/2 type IT CCD
■ XC-ES51/ES51CE :1/2 type IT CCD High sensitivity
■ External trigger shutter function
XC-ES50/ES51/ES30 : 1/4 to 1/10,000 sec.
XC-ES50CE/ES51CE/ES30CE : 1/4 to 1/8,000 sec.
■ Electronic shutter function
XC-ES50/ES51/ES30 : 1/100 to 1/10.000 sec.
XC-ES50CE/ES51CE/ES30CE : 1/120 to 1/10.000 sec.
■ High S/N ratio: 60 dB
■ 2:1 Interlaced/non-interlaced
■ Frame/field accumulation
■ Restart/reset function
■ Sync system: Internal/external (HD/VD)
■ High shock and vibration resistance
Accessories
■ Compact camera adaptor
●DC-700/700CE
■ 12-pin camera cable (CE standard)
●CCXC-12P02N (2 m)
●CCXC-12P05N (5 m)
●CCXC-12P10N (10 m)
●CCXC-12P25N (25 m)
■ Tripod adaptor
●VCT-333I
■ C-mount LENS
●VCL-08YM
●VCL-16Y-M
●VCL-12YM
●VCL-25Y-M
●VCL-50Y-M
Dimensions
Camera body of all XC-E models
14.5
29
(4.9)
5.1
12 30 8
15 23.7
Unit: mm
16.5
22
42
*1: M3 screw size
*2: M2 screw size
Notice
From January 2005, the outside dimensions of XC-E series consoles
will be changed to the same dimensions of XC-HR series consoles.
For the new outside dimensions, see page 88.
The outside dimensions will be changed from the following serial
numbers.
XC-ES50/XC-ES30: 250001
XC-ES50CE/ES30CE: 550001
XC-ES51:150001
XC-ES51CE:450001
76 XC-ES50/ES50CE/ES51/ES51CE/ES30/ES30CE
www.DataSheet4U.com
Normal Shutter
This mode provides continuous video output with the electronic
shutter selected by switches to clearly capture a high-speed
moving object.
■ Setting of normal shutter speed
Shutter
OFF
1/125
1/250
1/500 1/1000
●Using trigger pulse width
– Set DIP switches 1 to 4 on the rear panel to 0.
– An arbitrary shutter speed can be obtained by setting the
trigger pulse width to the range of 2 msec to 250 msec.
Mode 1
(Non-reset mode)
Mode 2
(Reset mode)
1/2000
1/4000
1/10000
(EIA)
1/8000
(CCIR)
Flickerless*
(EIA: 1/100
CCIR: 1/120)
(Unit: second)
* In the flickerless mode, the normal shutter speed is 1/100 sec for XC-ES50/ES30 and XC-
EI50/EI30 (EIA) and 1/120 sec for XC-ES50CE/ES30 CE and XC-EI50CE/EI30CE (CCIR).
Note
It is recommended to set DIP switch 5 for field selection. (The field selection
is about two times in sensitivity as high as the frame selection.)
External Trigger Shutter
These modes are used to capture one image (one field) per trigger
pulse. Set DIP switches 6, 7, and 8 on the rear panel to mode 1 or 2.
(Refer to the table below.) When the trigger pulse width is 1/3 sec or
more, the output signal is switched to a normal video signal.
There are two modes for timing in which a video signal is obtained.
●Mode 1 (Non-reset mode)
In this mode, a video signal synchronized with a VD signal is
output after a trigger pulse is input.
– A video signal is synchronized with the external VD signal
when an external HD/VD signal is input.
– A video signal is synchronized with an internal VD signal when
no external HD/VD signal is input.
●Mode 2 (Reset mode)
In this mode, an internal video signal is output from a trigger
pulse after a certain period of time.
■ Setting of external trigger shutter speed
There are two ways to set the shutter speed.
Mode 1 (Non-reset mode)
Mode 2 (Reset mode)
*1/100
(EIA)
1/120
(CCIR)
1/125
1/250
1/500
*1/100
(EIA)
1/120
(CCIR)
1/125
1/250
1/500
Exposure time = Trigger pulse width + 97 µsec (EIA)
120 µsec (CCIR)
Note
1. lt is recommended to set DIP switch 5 for field selection.
(The field selection is about two times in sensitivity as high as
the frame selection.)
2. After a trigger pulse is input, a new trigger pulse must not be
input before the video signal obtained by the trigger pulse has
been output.
■ Specifications of trigger pulse
A
B
T
A: 4 to 5.0 V
B: 0 to 1.0 V
T: 2 µs to 1/4 s
T: 2 ms to 1/4 s, 100 µs to 1/4 s when setting the shutter speed using DIP switch
* Input impedance: 10 kW or more
* The voltage and pulse width used are measured at pin 11 of a 12-pin
multi-connector on the rear panel.
Restart/Reset
The information on one screen can be extracted at any time by
inputting a restart/reset signal (HD/VD) from the outside. To enter
this mode, set DIP switches 6, 7, and 8 on the rear panel of a
camera as shown in the table below. The setting is especially
effective for the following operation.
1/1000
1/2000
**1/10000
1/4000
(EIA)
1/8000
(CCIR)
1/1000
1/2000
**1/10000
1/4000
(EIA)
1/8000
(CCIR)
(Unit: second)
(Unit: second)
* The external trigger shutter speed is set to 1/100 sec for XC-ES50/ES30, XC-EI50/
EI30 (EIA) and 1/120 sec for XC-ES50CE/ES30CE, XC-EI50CE/EI30CE (CCIR).
** The external trigger shutter speed is set to 1/10000 sec for XC-ES50/ES30, XC-EI50/
EI30 (EIA) and 1/8000 sec for XC-ES50CE/ES30CE, XC-EI50CE/EI30CE (CCIR).
XC-ES50/ES50CE/ES51/ES51CE/ES30/ES30CE 79
4페이지 | |||
구 성 | 총 4 페이지수 | ||
다운로드 | [ XC-EI51CE.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
XC-EI51CE | (XC-Exx1CE) CCD B/W Camera Module | Sony |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |