Datasheet.kr   

R46KRxxxxxx 데이터시트 PDF




Kemet Electronics에서 제조한 전자 부품 R46KRxxxxxx은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 R46KRxxxxxx 자료 제공

부품번호 R46KRxxxxxx 기능
기능 Metallized Polypropylene Film Capacitor
제조업체 Kemet Electronics
로고 Kemet Electronics 로고


R46KRxxxxxx 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 9 페이지수

미리보기를 사용할 수 없습니다

R46KRxxxxxx 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Loose
Taped
Fig.1 Fig.2
R.46
X2 CLASS (IEC 60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R46
Insulated rigid leads Insulated flexible leads 0.5mm2
Note: R.46 series has replaced the 1.40 series and 1.47 series.
For new design we suggest the use of the R.46 series.
Ø d ±0.05
p 15
0.6 or 0.8*
*See size table.
All dimensions are in mm.
22.5 p 27.5
0.8
p = 37.5
1
Pitch
(mm)
10.0
15.0
15.0
22.5
27.5
37.5
Box thickness (B)
(mm)
All
<7.5
≥7.5
All
All
All
Maximum dimensions (mm)
B max
H max
L max
B +0.2
H +0.1
L +0.2
B +0.2
H +0.1
L +0.3
B +0.2
H +0.1
L +0.5
B +0.2
H +0.1
L +0.3
B +0.2
H +0.1
L +0.3
B +0.3
H +0.1
L +0.3
GENERAL TECHNICAL DATA
test method and performance
Dielectric: polypropylene film.
Damp heat, steady state:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
electrical characteristics
Rated voltage (VR):
275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
56 days
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Capacitance range:
0.01µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C:
* Typical value
10 (6)* at 1kHz
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
1x105 M(5x105 M)*
30000 s (150000 s )*
* Typical value
+25°C±5°C
1 min
100 Vdc
for C0.33µF
for C>0.33µF
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
05/2007
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
Winding scheme
158
single sided metallized
polypropylene film




R46KRxxxxxx pdf, 반도체, 판매, 대치품
www.DataSheet4U.com
R.46
X2 CLASS (IEC 60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
Rated Cap.
300 Vac / 630 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
BHL p
(V/ µs)
0.010 µF
0.015 µF
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
0.6
0.6
500 R46 3F 2100 - - M1 -
500 R46 3F 2150 - - M1 -
0.022 µF
0.033 µF
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
0.6
0.6
500 R46 3F 2220 - - M1 -
500 R46 3F 2330 - - M1 -
0.047 µF
0.068 µF
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
0.6
0.6
500 R46 3F 2470 - - M1 -
500 R46 3F 2680 - - M1 -
0.1 µF
0.010 µF
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
0.6
0.6
500 R46 3F 3100 - - M1 M
400 R46 3I 2100 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6
400 R46 3I 2150 - - 01 -
0.022 µF
0.033 µF
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
0.6
0.6
400 R46 3I 2220 - - 01 -
400 R46 3I 2330 - - 01 -
0.047 µF
0.068 µF
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
0.6
0.6
400 R46 3I 2470 - - 01 -
400 R46 3I 2680 - - 01 -
0.10 µF
0.10 µF
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
0.6
0.6
400 R46 3I 3100 - - M1 M
400 R46 3I 3100 - - 01 -
0.15 µF
0.15 µF
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
0.6
0.6
400 R46 3I 3150 - - M2 M
400 R46 3I 3150 - - M1 -
0.22 µF
0.22 µF
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
0.6
0.6
400 R46 3I 3220 - - M2 M
400 R46 3I 3220 - - M1 -
0.22 µF
0.33µF
0.33 µF
9.0
10.0
13.0
12.5
16.0
12.0
18.0
18.0
18.0
15.0
15.0
15.0
0.6
0.8
0.8
400 R46 3I 3220 - - L2 -
400 R46 3I 3330 - - M1 -
400 R46 3I 3330 - - 01 -
0.47 µF 11.0 19.0 18.0 15.0
0.15 µF 6.0 15.0 26.5 22.5
0.8
0.8
400 R46 3I 3470 - - M1 -
200 R46 3N 3150 - - 01 -
0.22 µF
0.33 µF
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
0.8
0.8
200 R46 3N 3220 - - M1 -
200 R46 3N 3330 - - M1 -
0.47 µF 8.5 17.0 26.5 22.5
0.68 µF 10.0 18.5 26.5 22.5
0.8
0.8
200 R46 3N 3470 - - M1 -
200 R46 3N 3680 - - M2 -
1.0 µF 13.0 22.0 26.5 22.5
0.47 µF 9.0 17.0 32.0 27.5
0.8
0.8
200 R46 3N 4100 - - M1 -
150 R46 3R 3470 - - 01 -
0.68 µF 9.0 17.0 32.0 27.5
1.0 µF 11.0 20.0 32.0 27.5
0.8
0.8
150 R46 3R 3680 - - M1 -
150 R46 3R 4100 - - M1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8
150 R46 3R 4150 - - M1 -
2.2 µF 13.0 25.0 32.0 27.5
2.2 µF 14.0 28.0 32.0 27.5
0.8
0.8
150 R46 3R 4220 - - M2 -
150 R46 3R 4220 - - M1 -
2.2 µF 18.0 33.0 32.0 27.5
3.3 µF 18.0 33.0 32.0 27.5
0.8
0.8
150 R46 3R 4220 - - 01 -
150 R46 3R 4330 - - M2 -
3.3 µF 22.0 37.0 32.0 27.5
4.7 µF 18.0 33.0 32.0 27.5
0.8
0.8
150 R46 3R 4330 - - M1 -
150 R46 3R 4470 - - M2 -
4.7 µF 22.0 37.0 32.0 27.5
1.5 µF 11.0 22.0 41.5 37.5
0.8
1.0
150 R46 3R 4470 - - M1 -
100 R46 3W 4150 - - M1 -
2.2 µF 11.0 22.0 41.5 37.5
2.2 µF 13.0 24.0 41.5 37.5
1.0
1.0
100 R46 3W 4220 - - M2 M
100 R46 3W 4220 - - M1 -
3.3 µF
4.7 µF
4.7 µF
16.0
16.0
19.0
28.5
28.5
32.0
41.5
41.5
41.5
37.5
37.5
37.5
1.0
1.0
1.0
100 R46 3W 4330 - - M1 -
100 R46 3W 4470 - - M2 M
100 R46 3W 4470 - - M1 -
6.8 µF 20.0 40.0 41.5 37.5
6.8 µF 24.0 44.0 41.5 37.5
1.0
1.0
100 R46 3W 4680 - - M2 -
100 R46 3W 4680 - - M1 -
10.0 µF 30.0 45.0 41.5 37.5 1.0
100 R46 3W 5100 - - M1 -
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
APPROVALS
ENEC
(**) IEC 60384-14
CSA
E 384-14-95
(up to 5.6µF)
UL 1414
up to 1µF, 85°C;
250Vac)
Class X2
Across-the-line
Across-the-line
File No.V4413
File No.154612
(LR 83890)
File No.E97797
UL 1283
(310 Vac)
GB/T 14472
Electromagnetic
Interference
Filters
Class X2
File No.E85238
File CQC3001008199
CQC3001008842
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
(**) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
AMMO-PACK
AMMO-PACK
REEL Ø500mm
REEL Ø500mm
Loose, short leads
Loose, long leads
Loose, long leads
Loose, insulated
rigid leads
Loose, insulated
flexible leads
Lead
length
(mm)
04 +2
25 -1/+2
30 +5
30 +5
150 ±5
Taping style
P2
(mm)
Fig.
(No.)
Pitch
(mm)
Ordering
code
(Digit 10 to 11)
12.70 1 10.0/15.0
19.05
2
22.5
DQ
DQ
12.70 1 10.0/15.0
19.05 2 22.5/27.5
CK
CK
00
50
40
51
52
Note: Ammo-pack is the preferred packaging for taped version.
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 152 and contact
our Technical Service for choosing the safest solution.
All dimensions are in mm
E12 Series available upon request
161 05/2007

4페이지










R46KRxxxxxx 전자부품, 판매, 대치품
www.DataSheet4U.com
R.46S
X2 CLASS (IEC60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
APPROVALS
Rated Cap.
(*)
275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
BHL p
(V/ µs)
0.022 µF
0.033 µF
4.0 9.0 13.0 10.0
5.0 11.0 13.0 10.0
0.6
0.6
500 R46 KF 2220 - - S0 -
500 R46 KF 2330 - - S0 -
0.047 µF
0.068 µF
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
0.6
0.6
500 R46 KF 2470 - - S0 -
500 R46 KF 2680 - - S0 -
0.068 µF
0.10 µF
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
0.6
0.6
400 R46 KI 2680 - - S0 -
400 R46 KI 3100 - - S1 M
0.10 µF 6.0 12.0 18.0 15.0 0.6
400 R46 KI 3100 - - S0 -
0.15 µF
0.15 µF
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
0.6
0.6
400 R46 KI 3150 - - S1 M
400 R46 KI 3150 - - S0 -
0.22 µF
0.22 µF
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
0.6
0.6
400 R46 KI 3220 - - S1 M
400 R46 KI 3220 - - S0 -
0.22 µF
0.22 µF
6.0 17.5 18.0 15.0
9.0 12.5 18.0 15.0
0.6
0.6
400 R46 KI 3220 - - S2 -
400 R46 KI 3220 - - S3 -
0.33 µF 13.0 12.0 18.0 15.0
0.33 µF 10.0 16.0 18.0 15.0
0.8
0.8
400 R46 KI 3330 - - S1 -
400 R46 KI 3330 - - S0 -
0.33 µF 7.5 18.5 18.0 15.0
0.47 µF 11.0 19.0 18.0 15.0
0.8
0.8
400 R46 KI 3330 - - S2 -
400 R46 KI 3470 - - S0 -
0.22 µF
0.33 µF
0.33 µF
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
0.8
0.8
0.8
200 R46 KN 3220 - - S0 -
200 R46 KN 3330 - - S1 M
200 R46 KN 3330 - - S0 -
0.47 µF
0.47 µF
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
0.8
0.8
200 R46 KN 3470 - - S1 M
200 R46 KN 3470 - - S0 -
0.68 µF 10.0 18.5 26.5 22.5
1.0 µF 10.0 18.5 26.5 22.5
0.8
0.8
200 R46 KN 3680 - - S0 -
200 R46 KN 4100 - - S2 M
1.0 µF 11.0 20.0 26.5 22.5
1.0 µF 13.0 22.0 26.5 22.5
0.8
0.8
200 R46 KN 4100 - - S1 -
200 R46 KN 4100 - - S0 -
1.2 µF 13.0 22.0 26.5 22.5 0.8
200 R46 KN 4120 - - S0 -
0.47 µF
0.68 µF
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
0.8
0.8
150 R46 KR 3470 - - S0 -
150 R46 KR 3680 - - S1 -
1.0 µF
1.5 µF
2.2 µF
11.0
13.0
13.0
20.0
22.0
25.0
32.0
32.0
32.0
27.5
27.5
27.5
0.8
0.8
0.8
150 R46 KR 4100 - - S1 -
150 R46 KR 4150 - - S1 -
150 R46 KR 4220 - - S2 -
3.3 µF 18.0 33.0 32.0 27.5
4.7 µF 18.0 33.0 32.0 27.5
0.8
0.8
150 R46 KR 4330 - - S2 -
150 R46 KR 4470 - - S2 -
1.5 µF 11.0 22.0 41.5 37.5
2.2 µF 11.0 22.0 41.5 37.5
1.0
1.0
100 R46 KW 4150 - - S1 -
100 R46 KW 4220 - - S2 M
2.2 µF 13.0 24.0 41.5 37.5
3.3 µF 16.0 28.5 41.5 37.5
1.0
1.0
100 R46 KW 4220 - - S1 -
100 R46 KW 4330 - - S1 -
4.7 µF 16.0 28.5 41.5 37.5
4.7 µF 19.0 32.0 41.5 37.5
1.0
1.0
100 R46 KW 4470 - - S2 M
100 R46 KW 4470 - - S1 -
6.8 µF 20.0 40.0 41.5 37.5
10.0 µF 30.0 45.0 41.5 37.5
1.0
1.0
100 R46 KW 4680 - - S2 -
100 R46 KW 5100 - - S1 -
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
E12 Series available upon request
All dimensions are in mm
ENEC
(**) IEC 60384-14
CSA
E 384-14-95
(up to 5.6 µF)
UL 1414
up to 1µF, 85°C;
250Vac)
UL 1283
(310 Vac)
GB/T 14472
Class X2
File No.V4413
Across-the-line
File No.154612
(LR 83890)
Across-the-line File No.E97797
Electromagnetic
Interference
Filters
Class X2
File No.E85238
File CQC3001008199
CQC3001008842
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
(**) ENEC mark has replaced all the following European
National marks:
Table 1
Standard
packaging style
AMMO-PACK
AMMO-PACK
REEL Ø500mm
REEL Ø500mm
Loose, short leads
Loose, long leads
Loose, long leads
Loose, insulated
rigid leads
Loose, insulated
flexible leads
Lead
length
(mm)
04 +2
25 -1/+2
30 +5
30 +5
150 ±5
Taping style
P2
(mm)
Fig.
(No.)
Pitch
(mm)
Ordering
code
(Digit 10 to 11)
12.70 1 10.0/15.0
19.05 2
22.5
DQ
DQ
12.70 1 10.0/15.0
19.05 2 22.5/27.5
CK
CK
00
50
40
51
52
Note: Ammo-pack is the preferred packaging for taped version.
05/2007
164

7페이지


구       성 총 9 페이지수
다운로드[ R46KRxxxxxx.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
R46KRxxxxxx

Metallized Polypropylene Film Capacitor

Kemet Electronics
Kemet Electronics

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵