Datasheet.kr   

ATCxxx PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 ATCxxx
기능 Millimeter Wavelength Single Layer Capacitors
제조업체 AT
로고 AT 로고 



전체 12 페이지

		

No Preview Available !

ATCxxx 데이터시트, 핀배열, 회로
ATC Millimeter Wavelength
Single Layer Capacitors
• Ultra-High Qs
• Low Cost
• DC to 50 GHz
• Broadband Applications
• .06 pF to 4700 pF
• Not Static Sensitive
• Capacitor Arrays
• High Reliability Testing
• Custom sizes, values, shapes,
tolerances and higher voltages
ATC 111 SERIES MICROCAP ® capacitors have beveled edges to minimize
the potential for crack propagation due to mechanical or thermal shock by
www.DaetlaimShineeatt4inUg.coambrupt metal-to-ceramic interfaces. Longer arc-over paths help
reduce shorting during epoxy die attachment.
ATC 116 SERIES MICROCAP ® capacitors have a conventional straight-sided
design which allows the user the ability to match stripline widths or design a
custom capacitor for limited circuit dimensions.
ATC 112 SERIES BI-TRIM ® capacitors are Binary capacitors in 1:2:2:4 or
1:2:4:8 configurations. This arrangement permits adjustment (trimming) of the
capacity value to a desired value by connecting sections in parallel. This is a
highly stable variable capacitor with none of the drawbacks of mechanically
variable capacitors such as contact resistance, shock and vibration sensitivity.
ATC 113 SERIES TWIN/CAP ® capacitors are two capacitors on one
substrate that are useful in microstrip lines to minimize lead inductance in
coupling applications for frequencies as high as 50 GHz. The coupling without
appreciable inductance is achieved by utilizing the two capacitors in series. The
unique configuration, low-profile and low inductance TWIN/CAPS® provide low
insertion loss and extremely high resonant frequencies.
Let ATC assist in designing your custom component.
CALL 631-622-4700.
Microcaps® are carried in selected values through our
QUIK-PICK 48 HOUR SHIPMENT SYSTEM®.
one norden lane, huntington station, n.y. 11746-2142 usa
phone: 631-622-4700 fax: 631-622-4748 e-mail: sales@atceramics.com
http://www.atceramics.com
ATC # 001-857 Rev. D; 4/00




ATCxxx pdf, 반도체, 판매, 대치품
ATC Single Layer Millimeter Wavelength Microcaps®: 111 & 116 Series
ATC PART NUMBER CODE
111 S CA 0R5 B 100 T T
Series:
111 Beveled edges
116 Perpendicular edges
Case Size: See Mechanical
Configurations; page 5.
Dielectric Style:
Max. 2 characters, see Specification
Chart; page 3.
Capacitance Code: 2 significant digits,
R = Decimal point; Number of zeros following
significant digits. See pages 6 and 7 for
www.DcaatapSahcietaent4cUe.cvoamlues.
Termination Suffix
Code Description
TT
(Standard)
Thin Film:
Titanium Tungsten / Nickel /Gold
100 µ in. min. Gold
AP
Thick Film: Platinum Gold
300 µ in. min.
WVDC (in Volts): 3 significant digits,
100 Volts is standard.
Capacitance Tolerance
Code A (pF) B (pF) C (pF) D (pF) F (%) G (%) J (%) K (%) M (%)
Tol. ± 0.05 ± 0.1 ± 0.25 ± 0.5 ± 1 ± 2% ± 5 ± 10 ±20%
Use the Standard Capacitance Value chart on pages 6 and 7 to select a code which is within the capacity range given for a
specific case size/dielectric combination.
Select a capacitance tolerance from the available tolerances listed in the Selection Chart.
The above part number describes a 100 volt, T T termination (thin film), 111 series (beveled edge) capacitor, case size S (0.018"
square nominal), CA dielectric (0 ±30 ppm/°C). This size/dielectric combination has a capacitance range of 0.4 to 0.9 pF and
available tolerances of B, C or D. 0R5 defines a capacitance value of 0.5 pF. B tolerance (±0.1 pF) was selected.
ATC accepts orders for our parts using designations with or without the ATCprefix. Both methods of defining the part number are equivalent, i.e., part
numbers referenced with the ATCprefix are interchangeable to parts referenced without the ATCprefix. Customers are free to use either in specifying or
procuring parts from American Technical Ceramics.
Design Your Own Single Layer Capacitor
ATC gives you the ability to create custom values and dimensions. When circuit board area is tight or you need to match your
stripline width, you can optimize the size and shape of required SLCs. This same technique can be used to build special values
that fall outside of the standard offerings.
Custom Values and Sizes
Optimize the best combination of length, width, thickness and dielectric material for your circuit/stripline capacitor requirements.
L = Length
10 to 100 mils
ATC
SLC
T = Thickness
4 to 12 mils
Design Guidelines
C = Capacitance (pF)
L = Length
W = Width
T = Thickness
W = Width
10 to 100 mils
C = (.225 K x L x W) / (1000 T)
10 to 100 mils, may not exceed 20 x T or 2.5 x W
10 to 100 mils, may not exceed 20 x T
4 to 12 mils, less than or equal to L/2 or W/2
A
AX
BA
BB
CA
Dielectric Constant (K)
14 CC 130 EC
650
23 DA 165 J
1100
36 DB 200 F
2000
31 HC 350 G
4500
62 EA 650 K
9000
4 American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142
phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com

4페이지










ATCxxx 전자부품, 판매, 대치품
ATC 111 & 116 Series Microcaps®: Capacitance Selection Chart
Case Size
LxW
Case Size
LxW
Case Size
LxW
X .050 x .050
(1.27 x 1.27)
Min. (pF) Max. (pF) Tol.
Y .070 x .070
(1.78 x 1.78)
Min. (pF) Max. (pF) Tol.
Z .090 x .090
(2.29 x 2.29)
Min. (pF) Max. (pF) Tol.
Dielectric
Code
0.7 1.8 B, C, D 1.3 3.6 B, C, D 2.2 5.6 B, C, D A
1.1 3.0
1.8 4.3
1.5 3.9
3.3 7.5
6.8 9.1
www.Dat9a.S1heet4U.c1o5m
8.2 10
10 22
10 22
B, C, D
B, C, D
B, C, D
C, D
C, D
G, J, K, M
D, J, K, M
J, K, M
J, K, M
2.2
3.6
7.5
3.0
6.8
10
15
18
22
5.6 B, C, D 3.6
7.5 B, C, D 5.6
9.1 C, D 9.1
6.8
B, C, D
5.6
9.1
10
15
C, D
G, J, K, M
10
33 G, J, K, M 22
39 G, J, K, M 27
47 G, J, K, M 33
10 B, C, D
9.1 B, C, D
15 F, G, J, K, M
9.1 B, C, D
12.0 F, G, J, K, M
27 F, G, J, K, M
56
F, G, J, K,
M
68 G, J, K, M
AX
BA
BB
CA
CC
DA
82 G, J, K, M DB
18
39 J, K, M 33
82 J, K, M 56
150 J, K, M HC
33
82 K, M 56
150 J, K, M 100
270 J, K, M EA
33
82 K, M 56
150 J, K, M 100
270 J, K, M EC
68 150 K, M 120 270 K, M 180 470 K, M J
100 270 K, M 220 470 K, M 330 820
M
F
220 560
M
470 1000
M
820 2200
M
G
470 1200 M 1000 2200 M 1500 4700 M
K
Inches (mm)
CAP.
CODE
100
120
150
180
220
270
CAP.
(pF)
10
12
15
18
22
27
CAP.
CODE
330
390
470
560
680
820
Standard Capacity Values
CAP. CAP. CAP. CAP.
(pF) CODE (pF) CODE
CAP. CAP.
(pF) CODE
CAP. CAP. CAP.
(pF) CODE (pF)
33 101 100 331 330 102 1000 332 3300
39 121 120 391 390 122 1200 392 3900
47 151 150 471 470 152 1500 472 4700
56 181 180 561 560 182 1800
68 221 220 681 680 222 2200
82 271 270 821 820 272 2700
Special values, sizes and tolerances available upon request. Consult factory.
American Technical Ceramics • One Norden Lane, Huntington Station, N.Y. 11746-2142
phone: 631-622-4700 • fax: 631-622-4748 • e-mail: sales@atceramics.com • http://www.atceramics.com
7

7페이지



구       성총 12 페이지
다운로드[ ATCxxx.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
ATCxxx

Millimeter Wavelength Single Layer Capacitors

AT
AT

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵