6417705 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 6417705
기능 HD6417705
제조업체 Hitachi
로고 Hitachi 로고 

전체 70 페이지


No Preview Available !

6417705 데이터시트, 핀배열, 회로
omTo all our customers
U.cRegarding the change of names mentioned in the document, such as
t4Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
SheeThe semiconductor operations of Mitsubishi Electric and Hitachi were
tatransferred to Renesas Technology Corporation on April 1st 2003.
aThese operations include microcomputer, logic, analog and discrete devices,
.Dand memory chips other than DRAMs (flash memory, SRAMs etc.)
w Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors,
w and other Hitachi brand names are mentioned in the document, these names
in fact all been changed to Renesas
Thank you for your understanding.
Technology Corp.
Except for our corporate
logo and corporate statement, no changes whatsoever have been made to the
mcontents of the document, and these changes do not constitute any alteration
to the contents of the document itself.
.coRenesas Technology Home Page:
et4URenesas Technology Corp.
Customer Support Dept.
www.DataSheApril 1, 2003
Renesas Technology

6417705 pdf, 반도체, 판매, 대치품
General Precautions on Handling of Product
1. Treatment of NC Pins
Note: Do not connect anything to the NC pins.
The NC (not connected) pins are either not connected to any of the internal circuitry or are
used as test pins or to reduce noise. If something is connected to the NC pins, the
operation of the LSI is not guaranteed.
2. Treatment of Unused Input Pins
Note: Fix all unused input pins to high or low level.
Generally, the input pins of CMOS products are high-impedance input pins. If unused pins
are in their open states, intermediate levels are induced by noise in the vicinity, a pass-
through current flows internally, and a malfunction may occur.
3. Processing before Initialization
When power is first supplied, the product’s state is undefined.
The states of internal circuits are undefined until full power is supplied throughout the
chip and a low level is input on the reset pin. During the period where the states are
undefined, the register settings and the output state of each pin are also undefined. Design
your system so that it does not malfunction because of processing while it is in this
undefined state. For those products which have a reset function, reset the LSI immediately
after the power supply has been turned on.
4. Prohibition of Access to Undefined or Reserved Addresses
Note: Access to undefined or reserved addresses is prohibited.
The undefined or reserved addresses may be used to expand functions, or test registers
may have been be allocated to these addresses. Do not access these registers; the system’s
operation is not guaranteed if they are accessed.
Rev. 1.0, 11/02, page iii of xxxviii


6417705 전자부품, 판매, 대치품
Register name:
The following notation is used for cases when the same or a
similar function, e.g. serial communication, is implemented
on more than one channel:
XXX_N (XXX is the register name and N is the channel
Bit order:
The MSB (most significant bit) is on the left and the LSB
(least significant bit) is on the right.
Number notation: Binary is B’xxxx, hexadecimal is H’xxxx, decimal is xxxx
Signal notation: An overbar is added to a low-active signal: xxxx
Related Manuals:
The latest versions of all related manuals are available from our web site.
Please ensure you have the latest versions of all documents you require.
SH7705 manuals:
Manual Title
SH7705 Hardware Manual
SH-3/SH-3E/SH3-DSP Programming Manual
This manual
Users manuals for development tools:
Manual Title
SH Series C/C++ Compiler, Assembler, Optimizing Linkage Editor User's
SH Series Simulator/Debugger (for Windows) User's Manual
SH Series Simulator/Debugger (for UNIX) User's Manual
Hitachi Embedded Workshop User's Manual
SH Series Hitachi Embedded Workshop, Hitachi Debugging Interface
Rev. 1.0, 11/02, page vi of xxxviii


구       성총 70 페이지
다운로드[ 6417705.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743

상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]


링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사




Renesas Technology
Renesas Technology    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵