|
|
PDF CYWM6935PAEC Data sheet ( Hoja de datos )
| Número de pieza | CYWM6935PAEC | |
| Descripción | WirelessUSB Radio Module | |
| Fabricantes | Cypress Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CYWM6935PAEC (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
PRELIMINARY
CYWM6935PAEC
WirelessUSB™ LR+PA Radio Module
1.0 Features
• The CYWM6935PAEC is a long range 2.4 GHz Radio
Module. It includes radio (CYWUSB6935), power ampli-
fier, RF switch, miniature RF coaxial connector and in-
terface connector
• Operates in the unlicensed Industrial, Scientific, and
Medical (ISM) band (2.4 GHz–2.483 GHz)
www.DataSheet•4U–.9c5o-mdBm or better receiver sensitivity
• 16-dBm typical output power
• Range of up to 200 meters or more
• Data throughput of up to 62.5 kbits/sec
• SPI microcontroller interface (up to 2 MHz data rate)
• Operating voltage from 3.0V to 3.6V
• Small PCBA Design: 0.95” (23.75 mm) by 0.95” (23.75
mm) by 0.212” (5.3 mm) (L x W x H)
• The radio module is FCC certified with external 2.4 GHz
antenna.
• FCC Modular Approval Grant to meet FCC Part 15, EN
300 328-1, EN 301 489-1, and Industry Canada RSS-210
standards
• An FCC Module Approval (MA) Grant provides
customers significant cost savings, by allowing
customers to adopt the CYWM6935PAEC FCC ID into
their own products
2.0 Functional Description
The CYWM6935PAEC WirelessUSB LR + PA Radio Module
offers a complete radio module solution for integration into
existing or new 2.4-GHz products.
The CYWM6935PAEC is tested for functional operation and is
FCC/ETSI(EU)/Industry pre-certified. The radio module is
designed to work with any commercial 2.4 GHz antenna which
is equivalent to INPAQ DAMA0BM12410205.(Antenna-A).
The CYWM6935PAEC is available in a small PCBA design
and can be mounted horizontally to the device PCB via a 12-
pin header. The pin-out of the header is shown in Figure 3-2.
3.0 Applications
• Building/Home Automation
— Climate Control
— Lighting Control
— Smart Appliances
— On-Site Paging Systems
— Alarm and Security
• Industrial Control
— Inventory Management
— Factory Automation
— Data Acquisition
— Automatic Meter Reading (AMR)
• Transportation
— Diagnostics
— Remote Keyless Entry
Vcc
Bypass
c a p a c ito rs
12 -pin
2m m
header
10
W irelessU S B LR
C Y W U S B 6935 S ilico n
T x P ath
S iG e
PA2423L
P ow er
A m p lifier
13M H z C rystal
R x P ath
R eceive enable
Tx/R x S w itch
T o /from external antenna
T ra n sm it e n a b le
Figure 3-1. CYWM6935PAEC Module
Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Document #: 001-07822 Rev. **
Revised June 28, 2006
1 page  
PRELIMINARY
CYWM6935PAEC
4.0 Module Certification Detail
The CYWM6935PAEC Radio Module is a device that
transmits and receives radio signals in accordance with the
spectrum regulations for the 2.4-GHz unlicensed frequency
range. Regional regulatory agency approval may be required
to operate CYWM6935PAEC throughout the world.
Cypress Semiconductor Corporation has obtained regulatory
approvals for the CYWM6935PAEC to be used in specific
countries. CYWM6935PAEC was approved under the
“Modular Approval (MA) to the OEM.
The MA Grant provides that device manufacturers who incor-
porate CYWM6935PAEC as tested and approved can be
relieved from having to perform the Radio Regulatory certifi-
www.DataSheetc4aUt.icoonmportion of the respective agency certification.
The MA Grant is valid only in countries[1.] that recognize the
MA Grant certification process; the USA, Canada, Belgium,
Denmark, France, Finland, Germany, Italy, Netherlands,
Spain, Sweden, UK.
4.1.3 Correct Labeling:
If an end device containing a WirelessUSB CYWM6935PAEC
Radio Module will be sold or used in the USA, the enclosure
of the product must display a label with the following basic
elements:
Contains FCC ID: R8KUGWN2USHN33
If an end device containing a WirelessUSB CYWM6935PAEC
Radio Module will be sold or used in Europe, the enclosure of
the product must display a label with the following basic
elements:
4.1 Eligibility Requirements for Regulatory Mod-
ule Approval
In order to be able to take advantage of Cypress’s modular
certification in an end product, the following must be ensured:
1. Correct Application.
2. Correct Installation.
3. Correct labeling.
4.1.1 Correct Application:
There are two types of application considered for
CYWM6935PAEC modules. The application types are defined
below:
a. Fixed Application:
Module is in a permanent location and has at least 2m
separation from the human body.
b. Mobile Application:
Module can be relocated and will have at least 20 cm
separation from the human body.
4.1.2 Correct Installation:
— Modules cannot be modified in any way.
— Modules must be used only in the operating range spec-
ified in the data sheets.
— Modules cannot be located within 20 cm of another in-
tentional radiator in the system.
— It is recommended to use Antenna-A or equivalent. The
antenna gain and form factor should be equivalent to
Antenna-A.
— Must guarantee that end user cannot easily change an-
tenna.
Note: Sidestepping these requirements is possible with
additional testing and/or recertification. However, modular
approval would no longer apply.
0122
If an end device containing WirelessUSB CYWM6935PAEC
Radio Module will be sold or used in Canada, the enclosure of
the product must display a label with the following basic
elements:
This product contains Cypress WirelessUSB module
Canadian Cert No IC: 5125A-UGWN2US
As of March 2006, Japan does not recognize the “Modular
Approval” certification. Regulatory certification for Japan
(TELEC) must be acquired through typical approval proce-
dures. These approvals are the sole responsibility of the OEM.
Note: Even with modular approval, the end device still has to
be tested for digital emissions compliance with all agencies as
an electronic device. The modular approval only eliminates the
need to test for compliance on RF transmissions.
4.2 User Guide Information
Electronic device manufacturers using Cypress’s Modular
Approval are required to follow the below mentioned labeling
practice on the container in which the device is marketed or in
the product user’s guide. This should be in accompaniment
with other regulatory information. The text may be disbursed
according to language or geographic regions if desired, but the
exact text shown below must be maintained.
4.2.1 United States of America requirements:
The device shall bear the following statement in a conspicuous
location:
Document #: 001-07822 Rev. **
Page 5 of 10
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet CYWM6935PAEC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CYWM6935PAEC | WirelessUSB Radio Module | Cypress Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |