Datasheet.kr   

TGS-2602-A00 데이터시트 PDF




Figaro에서 제조한 전자 부품 TGS-2602-A00은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 TGS-2602-A00 자료 제공

부품번호 TGS-2602-A00 기능
기능 Gas Sense
제조업체 Figaro
로고 Figaro 로고


TGS-2602-A00 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 2 페이지수

미리보기를 사용할 수 없습니다

TGS-2602-A00 데이터시트, 핀배열, 회로
FIGARO
PRODUCT INFORMATION
TGS 2602 - for the detection of Air Contaminants
Features:
Applications:
* High sensitivity to VOCs and odorous gases * Air cleaners
* Low power consumption
* Ventilation control
* High sensitivity to gaseous air
* Air quality monitors
contaminants
* VOC monitors
* Long life
* Odor monitors
* Small size
www.DataSheet4U.com
The sensing element is comprised of a metal oxide semiconductor layer formed
on the alumina substrate of a sensing chip together with an integrated heater.
In the presence of detectable gas, sensor conductivity increases depending on
gas concentration in the air. A simple electrical circuit can convert the change
in conductivity to an output signal which corresponds to the gas concentration.
The TGS 2602 has high sensitivity not only to air contaminants which are
emitted by cigarette smoke, but also to low concentrations of odorous gases
such as ammonia and H2S generated from waste materials in office and home
environments. The sensor also has high sensitivity to low concentrations of
VOCs such as toluene emitted from wood finishing and construction products.
Figaro also offers a microprocessor (FIC02667) which contains special soft-
ware for handling the sensor's signal for appliance control applications.
Due to miniaturization of the sensing chip, TGS 2602 requires a heater current
of only 56mA and the device is housed in a standard TO-5 package.
The figure below represents typical sensitivity characteristics,
all data having been gathered at standard test conditions (see
reverse side of this sheet). The Y-axis is indicated as sensor
resistance ratio (Rs/Ro) which is defined as follows:
Rs = Sensor resistance in displayed gases at
various concentrations
Ro = Sensor resistance in fresh air
The figure below represents typical temperature and humidity
dependency characteristics. Again, the Y-axis is indicated as
sensor resistance ratio (Rs/Ro), defined as follows:
Rs = Sensor resistance in fresh air
at various temperatures/humidities
Ro = Sensor resistance in fresh air
at 20°C and 65% R.H.
Sensitivity Characteristics:
Temperature/Humidity Dependency:
10 10
1 Air
Hydrogen
100% R.H.
Hydrogen
sulfide
Ammonia
Ethanol
1
0.1
Toluene
40% R.H.
65% R.H.
85% R.H.
0.01
0.1
1 10
Gas concentration (ppm)
0.1
100 -10 0 10 20 30 40 50 60
Ambient temperature (˚C)
IMPORTANT NOTE: OPERATING CONDITIONS IN WHICH FIGARO SENSORS ARE USED WILL VARY WITH EACH CUSTOMER’S SPECIFIC APPLICATIONS. FIGARO STRONGLY
RECOMMENDS CONSULTING OUR TECHNICAL STAFF BEFORE DEPLOYING FIGARO SENSORS IN YOUR APPLICATION AND, IN PARTICULAR, WHEN CUSTOMER’S TARGET GASES
ARE NOT LISTED HEREIN. FIGARO CANNOT ASSUME ANY RESPONSIBILITY FOR ANY USE OF ITS SENSORS IN A PRODUCT OR APPLICATION FOR WHICH SENSOR HAS NOT BEEN
SPECIFICALLY TESTED BY FIGARO.





구       성 총 2 페이지수
다운로드[ TGS-2602-A00.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
TGS-2602-A00

Gas Sense

Figaro
Figaro

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵