DataSheet.es    


PDF IXDF404 Data sheet ( Hoja de datos )

Número de pieza IXDF404
Descripción (IXDx404) 4 Ampere Dual Low-Side Ultrafast MOSFET Drivers
Fabricantes IXYS Corporation 
Logotipo IXYS Corporation Logotipo



Hay una vista previa y un enlace de descarga de IXDF404 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! IXDF404 Hoja de datos, Descripción, Manual

IXDN404 / IXDI404 / IXDF404
4 Ampere Dual Low-Side Ultrafast MOSFET Drivers
Features
• Built using the advantages and compatibility
of CMOS and IXYS HDMOSTM processes
• Latch-Up Protected up to 0.5A
• High Peak Output Current: 4A Peak
• Wide Operating Range: 4.5V to 35V
• High Capacitive Load
Drive Capability: 1800pF in <15ns
• Matched Rise And Fall Times
• Low Propagation Delay Time
www.DataSheeLto4Uw.cOomutput Impedance
• Low Supply Current
• Two Drivers in Single Chip
Applications
• Driving MOSFETs and IGBTs
• Motor Controls
• Line Drivers
• Pulse Generators
• Local Power ON/OFF Switch
• Switch Mode Power Supplies (SMPS)
• DC to DC Converters
• Pulse Transformer Driver
• Class D Switching Amplifiers
• Limiting di/dt Under Short Circuit
General Description
The IXDN404/IXDI404/IXDF404 is comprised of two 4 Ampere
CMOS high speed MOSFET drivers. Each output can source
and sink 4A of peak current while producing voltage rise and
fall times of less than 15ns to drive the latest IXYS MOSFETs
and IGBT's. The input of the driver is compatible with TTL or
CMOS and is fully immune to latch up over the entire operating
range. A patent-pending circuit virtually eliminates CMOS
power supply cross conduction and current shoot-through.
Improved speed and drive capabilities are further enhanced by
very low, matched rise and fall times.
The IXDN404 is configured as a dual non-inverting gate driver,
the IXDI404 is a dual inverting gate driver, and the IXDF404 is a
dual inverting + non-inverting gate driver.
The IXDN404/IXDI404/IXDF404 family are available in the
standard 8 pin P-DIP (PI), SOIC-8 (SIA) and SOIC-16 (SIA-16)
packages. For enhanced thermal performance, the SOP-8 and
SOP-16 are also available in a package with an exposed
grounded metal back as the SI and SI-16 repectively.
Ordering Information
Part Number
IXDN404PI
IXDN404SI
IXDN404SIA
IXDN404SI-16
IXDN404SIA-16
IXDI404PI
IXDI404SI
IXDI404SIA
IXDI404SI-16
IXDI404SIA-16
IXDF404PI
IXDF404SI
IXDF404SIA
IXDF404SI-16
IXDF404SIA-16
Package Type
8-Pin PDIP
8-Pin SOIC with Grounded Metal Back
8-Pin SOIC
16-Pin SOIC with Grounded Metal Back
16-Pin SOIC
8-Pin PDIP
8-Pin SOIC with Grounded Metal Back
8-Pin SOIC
16-Pin SOIC with Grounded Metal Back
16-Pin SOIC
8-Pin PDIP
8-Pin SOIC with Grounded Metal Back
8-Pin SOIC
16-Pin SOIC with Grounded Metal Back
16-Pin SOIC
Temp. Range
-55°C to
+125°C
-55°C to
+125°C
-55°C to
+125°C
NOTE: Mounting or solder tabs on all packages are connected to ground
Configuration
Dual Non
Inverting
Dual Inverting
Inverting +
Non Inverting
Copyright © IXYS CORPORATION 2004
First Release
DS99018B(08/04)

1 page




IXDF404 pdf
IXDN404 / IXDI404 / IXDF404
Pin Description
SYMBOL
IN A
FUNCTION
A Channel Input
GND
Ground
IN B
OUT B
B Channel Input
B Channel Output
VCC
Supply Voltage
OUT A
www.DataSheet4U.com
A Channel Output
DESCRIPTION
A Channel Input signal-TTL or CMOS compatible.
The system ground pin. Internally connected to all circuitry, this pin provides
ground reference for the entire chip. This pin should be connected to a low
noise analog ground plane for optimum performance.
B Channel Input signal-TTL or CMOS compatible.
B Channel Driver output. For application purposes, this pin is connected via
a resistor to a gate of a MOSFET/IGBT.
Positive power-supply voltage input. This pin provides power to the entire
chip. The range for this voltage is from 4.5V to 35V.
A Channel Driver output. For application purposes, this pin is connected via
a resistor to a gate of a MOSFET/IGBT.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD procedures when
handling and assembling this component.
Figure 4 - Characteristics Test Diagram
Vcc
10uF
25V
1 NC
2 In A
3 Gnd
4 In B
NC 8
Out A 7
Vcc 6
Out B 5
Agilent 1147A
Current Probe
1800 pF
Agilent 1147A
Current Probe
1800 pF
5

5 Page





IXDF404 arduino
Dimenional Outline: IXDD404PI
IXDN404 / IXDI404 / IXDF404
www.DataSheet4U.com
Dimenional Outlines: IXDD404SI-CT and IXDD404SIA
Dimenional Outlines: IXDD404SI-16CT and IXDD404SIA-16
IXYS Corporation
3540 Bassett St; Santa Clara, CA 95054
Tel: 408-982-0700; Fax: 408-496-0670
IXYS Semiconductor GmbH
Edisonstrasse15 ; D-68623; Lampertheim
Tel: +49-6206-503-0; Fax: +49-6206-503627
11

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet IXDF404.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IXDF402(IXDx402) 2 Ampere Dual Low-Side Ultrafast MOSFET DriversIXYS Corporation
IXYS Corporation
IXDF402PI(IXDx402xI) 2 Ampere Dual Low-Side Ultrafast MOSFET DriversIXYS Corporation
IXYS Corporation
IXDF402SI(IXDx402xI) 2 Ampere Dual Low-Side Ultrafast MOSFET DriversIXYS Corporation
IXYS Corporation
IXDF402SI-16(IXDx402xI) 2 Ampere Dual Low-Side Ultrafast MOSFET DriversIXYS Corporation
IXYS Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar