|
|
Número de pieza | TS128MCF45I | |
Descripción | Transcend Industrial CF Card | |
Fabricantes | Transcend | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TS128MCF45I (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! TTrraannsscceenndd IInndduussttrriiaall CCFF CCaarrdd
(( 112288MMBB ~~ 88GGBB ))
Description
The Transcend 128MB ~ 8GB CFI is an industrial
CompactFlash Card with Industrial Flash Memory
assembled on a printed circuit board.
www.DataShPeleat4cUe.cmoment
Dimensions
Features
• CompactFlash Specification Version 3.0 Complaint
• RoHS compliant products
• Single Power Supply: 5V or 3.3V
• Operating Temperature: -40oC to 85oC
• Storage Temperature: -55oC to 100oC
• Operation Modes:
PC Card Memory Mode
PC Card IO Mode
True IDE Mode
• True IDE Mode supports up to Ultra DMA Mode 4
(Series of –D support Ultra DMA mode, please see Order
Information)
• Endurance: 2,000,000 Program/Erase cycles
• MTBF: 1,000,000 hours
• Durability of Connector: 10,000 times
• High Data Reliability based on the internal 4-bits ECC
(Error Correcting Code) function
• Support Wear-leveling algorithm
Order Information
Part Number
Mode
Description
True IDE mode Non-DMA Fixed Disk
TS128M~8GCF45I
PCMCIA mode Non-DMA Removable Disk
CF45I
True IDE mode Ultra-DMA Fixed Disk
TS128M~8GCF45I-D
PCMCIA mode Ultra-DMA Removable Disk
Transcend Information Inc.
1
1 page TTrraannsscceenndd IInndduussttrriiaall CCFF CCaarrdd
(( 112288MMBB ~~ 88GGBB ))
www.DataSheet4U.com
Note: 1) These signals are required only for 16 bit accesses and not required when installed in 8 bit
systems. Devices should allow for 3-state signals not to consume current.
2) The signal should be grounded by the host.
3) The signal should be tied to VCC by the host.
4) The mode is optional for CF+ Cards, but required for CompactFlash Storage Cards.
5) The -CSEL signal is ignored by the card in PC Card modes. However, because it is not
pulled upon the card in these modes, it should not be left floating by the host in PC Card
modes. In these modes, the pin should be connected by the host to PC Card A25 or
grounded by the host.
6) If DMA operations are not used, the signal should be held high or tied to VCC by the host. For
proper operation in older hosts: while DMA operations are not active, the card shall ignore
this signal,including a floating condition
7) Signal usage in True IDE Mode except when Ultra DMA mode protocol is active.
8) Signal usage in True IDE Mode when Ultra DMA mode protocol DMA Write is active.
9) Signal usage in True IDE Mode when Ultra DMA mode protocol DMA Read is active.
Transcend Information Inc.
5
5 Page TTrraannsscceenndd IInndduussttrriiaall CCFF CCaarrdd
(( 112288MMBB ~~ 88GGBB ))
Electrical Specification
The following tables indicate all D.C. Characteristics for the
CompactFlash Storage Card. Unless otherwise stated, conditions are:
Vcc = 5V ±10%
Vcc = 3.3V ± 5%
www.DataSheet4UA.cbosmolute Maximum Conditions
Input Power
Input Leakage Current
Input Characteristics
Transcend Information Inc.
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet TS128MCF45I.PDF ] |
Número de pieza | Descripción | Fabricantes |
TS128MCF45I | Transcend Industrial CF Card | Transcend |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |