DataSheet.es    


PDF 29LV160C Data sheet ( Hoja de datos )

Número de pieza 29LV160C
Descripción 16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY
Fabricantes Macronix International 
Logotipo Macronix International Logotipo



Hay una vista previa y un enlace de descarga de 29LV160C (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! 29LV160C Hoja de datos, Descripción, Manual

MX29LV160C T/B
FEATURES
16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE
3V ONLY FLASH MEMORY
• Extended single - supply voltage range 2.7V to 3.6V
• 2,097,152 x 8/1,048,576 x 16 switchable
• Single power supply operation
- 3.0V only operation for read, erase and program
operation
Fully compatible with MX29LV160B device
www.DataSheet4UF.caomst access time: 55R/70/90ns
• Low power consumption
- 30mA maximum active current
- 0.2uA typical standby current
• Command register architecture
- Byte/word Programming (9us/11us typical)
- Sector Erase (Sector structure 16K-Bytex1,
8K-Bytex2, 32K-Bytex1, and 64K-Byte x31)
• Auto Erase (chip & sector) and Auto Program
- Automatically erase any combination of sectors with
Erase Suspend capability.
- Automatically program and verify data at specified
address
• Erase Suspend/Erase Resume
- Suspends sector erase operation to read data from,
or program data to, any sector that is not being erased,
then resumes the erase.
• Status Reply
- Data# Polling & Toggle bit for detection of program
and erase operation completion.
• Ready/Busy# pin (RY/BY#)
- Provides a hardware method of detecting program or
erase operation completion.
• Sector protection
- Hardware method to disable any combination of
sectors from program or erase operations
- Temporary sector unprotect allows code changes in
previously locked sectors.
• CFI (Common Flash Interface) compliant
- Flash device parameters stored on the device and
provide the host system to access
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Boot Sector Architecture
- T = Top Boot Sector
- B = Bottom Boot Sector
• Low VCC write inhibit is equal to or less than 1.4V
• Package type:
- 44-pin SOP
- 48-pin TSOP
- 48-ball CSP
- All Pb-free devices are RoHS Compliant
• Compatibility with JEDEC standard
- Pinout and software compatible with single-power
supply Flash
• 10 years data retention
GENERAL DESCRIPTION
The MX29LV160C T/B is a 16-mega bit Flash memory
organized as 2M bytes of 8 bits or 1M words of 16 bits.
MXIC's Flash memories offer the most cost-effective
and reliable read/write non-volatile random access
memory. The MX29LV160C T/B is packaged in 44-pin
SOP, 48-pin TSOP and 48-ball CSP. It is designed to be
reprogrammed and erased in system or in standard
EPROM programmers.
The standard MX29LV160C T/B offers access time as
fast as 55ns, allowing operation of high-speed micropro-
cessors without wait states. To eliminate bus conten-
tion, the MX29LV160C T/B has separate chip enable
(CE#) and output enable (OE#) controls.
MXIC's Flash memories augment EPROM functionality
with in-circuit electrical erasure and programming. The
MX29LV160C T/B uses a command register to manage
this functionality. The command register allows for 100%
TTL level control inputs and fixed power supply levels
during erase and programming, while maintaining maxi-
mum EPROM compatibility.
MXIC Flash technology reliably stores memory contents
even after 100,000 erase and program cycles. The MXIC
cell is designed to optimize the erase and programming
mechanisms. In addition, the combination of advanced
tunnel oxide processing and low internal electric fields
for erase and program operations produces reliable cy-
cling. The MX29LV160C T/B uses a 2.7V~3.6V VCC
supply to perform the High Reliability Erase and auto
Program/Erase algorithms.
The highest degree of latch-up protection is achieved
with MXIC's proprietary non-epi process. Latch-up pro-
tection is proved for stresses up to 100 milliamps on
address and data pin from -1V to VCC + 1V.
P/N:PM1186
REV. 1.2, JAN. 19, 2006
1

1 page




29LV160C pdf
BLOCK DIAGRAM
MX29LV160C T/B
CE#
OE#
www.DataSheet4U.com WE#
RESET#
CONTROL
INPUT
LOGIC
PROGRAM/ERASE
HIGH VOLTAGE
WRITE
STATE
MACHINE
(WSM)
A0-A19
ADDRESS
LATCH
AND
BUFFER
FLASH
ARRAY
ARRAY
SOURCE
HV
Y-PASS GATE
STATE
REGISTER
COMMAND
DATA
DECODER
SENSE
AMPLIFIER
PGM
DATA
HV
PROGRAM
DATA LATCH
COMMAND
DATA LATCH
Q0-Q15/A-1
I/O BUFFER
P/N:PM1186
REV. 1.2, JAN. 19, 2006
5

5 Page





29LV160C arduino
MX29LV160C T/B
TABLE 6. MX29LV160C T/B BUS OPERATION
DESCRIPTION
Read
www.DataSheet4WUr.citoem
Reset
Temporary sector unlock
Output Disable
Standby
Sector Protect
Chip Unprotect
Sector Protection Verify
ADDRESS
CE# OE# WE# RE- A19 A11 A9 A8 A6 A5 A1 A0
SET# A12 A10 A7
A2
LLH H
AIN
LH
XX
XX
LH
Vcc± X
0.3V
LH
LH
LL
LH
AIN
XL
X
X VID
AIN
HH
X
X Vcc±
X
0.3V
L VID SA X X X L X H L
L VID X X X X H X H L
H H SA X VID X L X H L
Q0~Q7
Dout
DIN(3)
High Z
DIN
High Z
High Z
Q8~Q15
BYTE BYTE
=VIH =VIL
Dout Q8~Q14
=High Z
Q15=A-1
DIN
High Z High Z
DIN High Z
High Z High Z
High Z High Z
DIN
DIN
CODE(5)
X
X
X
X
X
X
NOTES:
1. Manufacturer and device codes may also be accessed via a command register write sequence. Refer to Table 4.
2. VID is the high voltage, 11.5V to 12.5V.
3. Refer to Table 5 for valid Data-In during a write operation.
4. X can be VIL or VIH.
5. Code=00H/XX00H means unprotected.
Code=01H/XX01H means protected.
6. A19~A12=Sector address for sector protect.
7. The sector protect and chip unprotect functions may also be implemented via programming equipment.
P/N:PM1186
REV. 1.2, JAN. 19, 2006
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet 29LV160C.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
29LV160B16 Megabit CMOS 3 Volt-only Sector Erase Flash MemoryAMD
AMD
29LV160BEMBM29LV160BEFujitsu Media Devices
Fujitsu Media Devices
29LV160BEMBM29LV160BEFujitsu Media Devices
Fujitsu Media Devices
29LV160BTMX29LV160BTMacronix International
Macronix International

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar