|
|
|
부품번호 | ZTA8.0MT 기능 |
|
|
기능 | For Ceramix Resonator | ||
제조업체 | ETC | ||
로고 | |||
전체 6 페이지수
SPECIFICATION FOR CERAMIC RESONATOR
www.DataSheet4U.com
MODEL NAME: ZTA8.0MT /ZTT8.0MT
SHANDONG YIGUANG ELECTRONIC JOINT STOCK CO., LTD
Tel: 86 539 8269397 8269399 Fax: 86 539 8269396
ZTA8.0MT/ZTT8.0MT CERAMIC RESONATOR
6.PHYSICAL AND ENVIRONMENTAL CHARCTERISTICS
Test Item
Condition of Test
Requirements
Lead strength
6-1
Lead Bending
Solder ability
6-2
www.DataSheet4U.com
Vibration
6-3
Random Drop
6-4
Resistance to
6-5 Soldering
Heat
Force of 1 Kg is applied for 10 second to each lead in
axial direction.
Firmed the terminal up to 2mm. Resonator lead
shall be subjected to withstand against 90º bending
its stem. This operation shall be done toward both
direction.
The terminals of the Resonator shall be immersion
in a soldering bath 230±5 for 3±0.5sec. refer to
Mil-STD-202E-208C
Resonator shall be measured after being
Applied vibration as below.
Vibration Freq:10-55Hz
Amplitude:1.5mm
Directions:3axial directions
Time:2bour/each direction
Resonator shall be measured after 3 times
Random dropping from the height of 1m.
Concrete floor
Dipped in 350±10 measured solder to a point
1.5mm from Resonator body for 3±0.5 sec or dipped
in 260±5 melted solder for 10±1 sec. Resonator
shall be measured after being placed in natural
condition for 1 hour.
No mechanical damage
and the measured
values shall meet Item5.
The solder shall for coat
at least 95% of the
terminal.
The measured values
Shall meet table l
3
4페이지 | |||
구 성 | 총 6 페이지수 | ||
다운로드 | [ ZTA8.0MT.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
ZTA8.0MT | For Ceramix Resonator | ETC |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |