|
|
PDF MB90F583B Data sheet ( Hoja de datos )
| Número de pieza | MB90F583B | |
| Descripción | (MB90F58xB) 16-bit Proprietary Microcontroller | |
| Fabricantes | Fujitsu Media Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MB90F583B (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-13709-2E
16-bit Proprietary Microcontroller
CMOS
F2MC-16LX MB90580B Series
www.DataSheetM4U.comB90583B/587/F583B/V580B
s DESCRIPTION
The MB90580B series is a line of general-purpose, Fujitsu 16-bit microcontrollers designed for process control
applications which require high-speed real-time processing, such as consumer products.
While inheriting the AT architecture of the F2MC*1 family, the instruction set for the F2MC-16LX CPU core of the
MB90580B series incorporates additional instructions for high-level languages, supports extended addressing
modes, and contains enhanced multiplication and division instructions as well as a substantial collection of
improved bit manipulation instructions. In addition, the MB90580B has an on-chip 32-bit accumulator which
enables processing of long-word data.
The peripheral resources integrated in the MB90580B series include: an 8/10-bit A/D converter, an 8-bit D/A
converter, UARTs (SCI) 0 to 4, an 8/16-bit PPG timer, 16-bit I/O timers (16-bit free-run timer, input capture units
(ICUs) 0 to 3, output compare units (OCUs) 0 and 1), and an IEBusTM controller *2.
Notes: *1: F2MC stands for FUJITSU Flexible Microcontroller, a registered trademark of FUJITSU LIMITED.
*2: IEBusTM is a trademark of NEC Corporation.
s FEATURES
• Minimum execution time: 62.5 ns/4 MHz oscillation (Uses PLL clock multiplication) maximum multiplier = 4
• Maximum memory space
16 Mbyte
Linear/bank access
(Continued)
s PACKAGES
100 pin plastic LQFP
100 pin plastic QFP
(FPT-100P-M05)
(FPT-100P-M06)
1 page  
MB90580B Series
(Continued)
Item
Part number
MB90587
MB90583B
MB90F583B
MB90V580B
16-bit
Number of channels: 1
free run timer
Overflow interrupts
16-bit
I/O
timer
Output compare
(OCU)
Number of channels: 2
Pin input factor: A match signal of compare register
www.DataSheet4U.com
Input capture (ICU)
Number of channels: 4
Rewriting a register value upon a pin input (rising, falling, or both edges)
Number of inputs: 8
DTP/external interrupt circuit Started by a rising edge, a falling edge, an “H” level input, or an “L” level input.
External interrupt circuit or extended intelligent I/O service (EI2OS) can be used.
Delayed interrupt generation An interrupt generation module for switching tasks used in real time operating
module
systems.
UART0, 1, 2, 3, 4
Clock synchronized transmission (62.5 Kbps to 1 Mbps)
Clock asynchronized transmission (1202 bps to 9615 bps)
Transmission can be performed by bi-directional serial transmission or by master/
slave connection.
A/D converter
Resolution: 8/10-bit changeable
Number of inputs: 8
One-shot conversion mode (converts selected channel only once)
Scan conversion mode
(converts two or more successive channels and can program up to 8 channels.)
Continuous conversion mode (converts selected channel repeatedly)
Stop conversion mode (converts selected channel and stop operation repeatedly)
D/A converter
8-bit resolution
Number of channels: 2 channels
Based on the R-2R system
Low-power consumption
(standby) mode
Sleep/stop/CPU intermittent operation/clock timer/hardware standby
Process
CMOS
Power supply voltage for
operation*
4.5 V to 5.5 V *2
*1 : It is setting of DIP switch S2 when Emulation pod (MB2145-507) is used.
Please refer to the MB2145-507 hardware manual (2.7 Emulator-specific Power Pin) about details.
*2 : Varies with conditions such as the operating frequency (See section “s ELECTRICAL CHARACTERISTICS”).
Assurance for the MB90V580B is given only for operation with a tool at a power supply voltage of 4.5 V to 5.5
V, an operating temperature of 0 to +25 °C, and an operating frequency of 1 MHz to 16 MHz.
s PACKAGE AND CORRESPONDING PRODUCTS
Package
MB90583B
MB90587
MB90F583B
FPT-100P-M05
FTP-100P-M06
: Available ×: Not available
Note: For more information about each package, see section “s PACKAGE DIMENSIONS”.
5
5 Page 
MB90580B Series
Pin no.
Pin name
QFP*1 LQFP*2
Circuit
type
Function
General-purpose I/O port.
P43
This pin serves as an open-drain output port with OD43 in the open-
drain control setting register (ODR4) set to “1”. [The pin is disabled
21 19
E with the input setting (DDR4 register: D43=“0”).]
(CMOS/H) UART1 serial data input (SIN1) pin.
www.DataSheet4U.com
SIN1
When UART1 is operating for input, this input is used as required and
thus the output from any other function to the pin must be off unless
used intentionally.
General-purpose I/O port.
22
20
P44
This pin serves as an open-drain output port with OD44 in the open-
E drain control setting register (ODR4) set to “1”. [The pin is disabled
(CMOS/H) with the input setting (DDR4 register: D44=“0”).]
SOT1
UART1 serial data output pin (SOT1).
This pin is enabled with the UART1 serial data output enabled.
General-purpose I/O port.
24
22
P45
This pin serves as an open-drain output port with OD45 in the open-
E drain control setting register (ODR4) set to “1”. [The pin is disabled
(CMOS/H) with the input setting (DDR4 register: D45=“0”).]
SCK1
UART1 serial clock I/O pin (SCK1).
This pin is enabled with the UART1 clock output enabled.
General-purpose I/O port.
25
23
P46
This pin serves as an open-drain output port with OD46 in the open-
E drain control setting register (ODR4) set to “1”. [The pin is disabled
(CMOS/H) with the input setting (DDR4 register: D46=“0”).]
ADTG
External trigger input pin (ADTG) for the A/D converter.
General-purpose I/O port.
26
24
P47
E This pin serves as an open-drain output port with OD47 in the open-
(CMOS/H) drain control setting register (ODR4) set to “1”. [The pin is disabled
with the input setting (DDR4 register: D47=“0”).]
P50 General-purpose I/O port.
AN0 Analog input pin (AN0) for use during A/D converter operation.
38
36
SIN3
G UART3 serial data input pin (SIN3).
(CMOS/H) When UART3 is operating for input, this input is used as required and
thus the output from any other function to the pin must be off unless
used intentionally.
P51 General-purpose I/O port.
39
37
AN1
SOT3
G Analog input pin (AN1) for use during A/D converter operation.
(CMOS/H) UART3 serial data output pin (SOT3).
This pin is enabled with the UART3 serial data output enabled.
*1: FPT-100P-M06
*2: FPT-100P-M05
(Continued)
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MB90F583B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MB90F583B | (MB90F58xB) 16-bit Proprietary Microcontroller | Fujitsu Media Devices |
| MB90F583C | 16-bit Proprietary Microcontroller |  FUJITSU |
| MB90F583CA | 16-bit Proprietary Microcontroller | FUJITSU |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |