QT2020 Datasheet PDF - Quake Technologies
| Part Number | QT2020 | |
| Description | 10 Gb/s Ethernet PHY Transceiver Chip | |
| Manufacturers | Quake Technologies | |
| Logo |  |
|
|
There is a preview and QT2020 download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
THE HIGHLY INTEGRATED SINGLE-CHIP QT2020 LOWERS COST,
REDUCES POWER AND IMPROVES RELIABILITY
WHILE OFFERING UNPRECEDENTED 10 GB/S PERFORMANCE
AND SUPERB JITTER TOLERANCE.
www.DataSAhDeeVt4AUN.coCmED
PRODUCT SHEET
QT2020
10 GB/S ETHERNET TRANSCEIVER WITH
XAUI INTERFACE FOR IEEE 802.3AE COMPLIANT
LAN/MAN APPLICATIONS
WHAT IT GIVES YOU:
An array of well-planned,
high-performance features
that facilitate the design of
10 Gb/s Ethernet fiber-optic
modules.
WHAT IT DOES:
The QT2020 converts a
10 Gb/s serial data stream
into four 3.125 Gb/s serial
lanes via the IEEE specified
XAUI (10 Gb/s attachment
unit interface) data bus.
Superior jitter tolerance allows
the designer to allocate jitter
budget elsewhere in the
module design.
On-chip clock generation
means no need for external
VCXOs, so fewer external
components are required.
The QT2020 has an
adjustable fiber side output
signaling range, which allows
a large selection of commer-
cially available laser drivers
to be connected directly to
the QT2020.
Programmable XAUI peaking
provides pre-emphasis adjust-
ment to account for channel
loss, which broadens the
choice of receivers used in
the system.
The QT2020 exceeds the IEEE and Telcordia
GR-253-CORE requirements for receiver jitter toler-
ance, with the demonstrated ability to successfully
recover clock and data in stressed eye testing.
Support for the EEPROM interface provides rapid,
easy initialization of the device in accordance with
the XENPAK Multisource Agreement (MSA).
Fully integrated test features enable quick evaluation
and faster time to market. Five loopback modes are
available to facilitate lab and system diagnostics.
SOME KEY FEATURES:
— On-chip clock generation and data recovery
— Ethernet monitoring (MDIO/C interface)
— EEPROM interface
— Multiple (5) loopback features
— 27-1 PRBS generator and checker on XAUI side
— 231-1 PRBS generator and checker on fiber side
— Adjustable fiber and XAUI output levels
— Adjustable XAUI pre-emphasis (peaking)
— 3.3 V, 2.5 V and 1.8 V power supplies and low
power dissipation
— 64b/66b decoding/encoding; 8b/10b
encoding/decoding
— Operates in low power mode
— Programmable XAUI transmit/receive lane ordering
— Optional 10.3125 GHz clock output
— Support for IEEE 802.3ae and XENPAK alarms
(LASI)
— Power supply monitoring
— Programmable TXOUT polarity swapping
— Integrated 4 channel 12 bit A/D converter
IDEAL FOR:
IEEE 802.3ae and XENPAK MSA compliant
LAN/MAN applications
Product Sheet Rev 1.1.4.1.4.6C
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for QT2020 electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ QT2020.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| QT2020 | The function is 10 Gb/s Ethernet PHY Transceiver Chip. Quake Technologies | |
| QT2021 | The function is 10 Gb/s Ethernet And Fibre Channel PHY Transceiver Chip. Quake Technologies | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
QT20
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||