|
|
Número de pieza | AT7910E | |
Descripción | SpW-10X SpaceWire Router | |
Fabricantes | ATMEL Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AT7910E (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
No Preview Available ! Features
• SpawcwewW.DiaretaRShoeuette4rU.com
– Logical to Physical addressing translation
– Priority Management
– Header Deletion Capability
• Eight Bidirectional SpaceWire links
– Full duplex communication
– Data rate from 2 up to 200 Mbit/s in each direction
• Two External Interfaces
– Dedicated Input and Output FIFOs
– 9-bit wide Interface
• Configuration Port
– Read/Write Accesses to internal registers
– Accessible from both the spacewire links (8 channels) and the external interfaces
– Remote Memory Access Protocol (RMAP) support
• Time Code Interface
– Master/Slave Capability
• Error/Status Interface
• Operating range
– Voltages
• 3V to 3.6V
– Temperature
• - 55°C to +125°C
• Maximum Power consumption
– All spacewire links active at 200Mbit/s : 4W -TBC
• Radiation Performance
– Total dose tested successfully up to 300 Krad (Si)
– No single event latchup below a LET of 80 MeV/mg/cm2
• ESD better than 2000V
• Quality Grades
– QML-Q or V with SMD
• Package: 196pins MQFPF
• Mass: 12grams
SpW-10X
SpaceWire
Router
AT7910E
7796B–AERO–08/08
1 page AT7910E
1.7 Control/Status Registers
www.DataSheet4U.com The control and status registers in the SpaceWire router provide the means to control the opera-
tion of the router, set the router configuration and parameters or monitor the status of the device.
The registers are accessed using RMAP command packets received by the configuration port.
7796B–AERO–08/08
5
5 Page AT7910E
5. Typical Applications
www.DataSheet4U.com
The AT7910E SpaceWire router is perfectly suited for development of applications requiring a
standalone router, a terminal node with SpaceWire interface or a mixed configuration of the two
previous ones.
5.1 Stand-alone router
The AT7910E SpaceWire Router may be used as a stand-alone router with up to eight
SpaceWire links connected to it. Configuration of the routing tables etc. may be done by sending
SpaceWire packets containing configuration commands to the router.
Figure 5-1. AT7910E as SpaceWire router
5.2 Node interface
The SpaceWire Router has two external ports which enable the device to be used as a node
interface. The equipment to be connected to the SpaceWire network is attached to one or both
external ports. One or more SpaceWire ports are used to provide the connection into the
SpaceWire network. Unused SpaceWire ports may be disabled and their outputs tri-stated to
save power. In this arrangement configuration of the routing tables and other parameters may
be done by sending configuration packets from the local host via an external port or from a
remote network manager via a SpaceWire port.
7796B–AERO–08/08
11
11 Page |
Páginas | Total 19 Páginas | |
PDF Descargar | [ Datasheet AT7910E.PDF ] |
Número de pieza | Descripción | Fabricantes |
AT7910E | SpW-10X SpaceWire Router | ATMEL Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |