|
|
Número de pieza | MP120D3 | |
Descripción | Zero Cross0.02-3 Amps RMS12-140 Volts RMS3-32 Control - Volts DC | |
Fabricantes | Crydom Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MP120D3 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.datasheet4u.com
Series MP
3 - 4 Amps • 120/240 Vac (AC Output) • 60 Vdc (DC Output) • SIP
• High Packaging Density
• Compatible w ith 5, 15 & 24
Volt Logic Systems
• Opto-Isolated 4000 Vrms
• Zero Voltage Sw itching
(AC)
Available in 3Arms and 4Arms ratings,
all are SPST-NO PC-mount relays that
provide greater packaging density and
compatibility with pin out of Series 6 and
OAC output modules. Internal snubber
included for high dv/dt applications (AC).
Manufactured in Crydom's ISO 9001
Certified facility for optimum product
performance and reliability.
MODEL NUMBER
AC OUTPUT SPECIFICATIONS ➀
Operating Voltage Range (47-63 Hz) [Vrms]
Load Current Range [Arms]
Transient Overvoltage [Vpk]
Max. Surge Current, (16.6ms) [Apk]
Max. On-State Voltage Drop @ Rated Current [Vpk]
Maximum I2 t for Fusing, (8.3 msec.) [A2sec]
Max. Off-State Leakage Current @ Rated Voltage [mArms]
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁
Max. Turn-On Time
Max. Turn-Off Time
Power Factor (Min.) with Max. Load
DC OUTPUT SPECIFICATIONS ➀
Operating Voltage Range [Vdc]
Load Current Range [Adc]
Max. Over Current (non-repetative) 1sec [A]
Max. On-State Voltage Drop @ Rated Current [Vdc]
Max. Turn-On time (Tdelay + Trise ) [µs]
Max. Turn-Off time (Tdelay + Tfall ) [µs]
Max. Off-State Leakage Current @ Rated Voltage [mA]
MP120D3
12-140
.02-3
400
90
1.6
36
5.0
200
1/2 Cycle
1/2 Cycle
0.5
MP2 40D3
24-280
.02-3
600
90
1.6
36
5.0
200
1/2 Cycle
1/2 Cycle
0.5
MPD CD3➂
3-60
0.02-3.0
5.0
1.5
100
100
1.0
MP2 40D4
24-280
.02-4
600
130
1.6
72
5.0
200
1/2 Cycle
1/2 Cycle
0.5
INPUT SPECIFICATIONS ➀
Control Voltage Range [Vdc]
Must Turn-On Voltage [Vdc]
Must Turn-Off Voltage [Vdc]
Typical Input Current @ 5Vdc [mA]
Nominal Input Impedance [Ohms]
GENERAL NOTES
➀ All parameters at 25˚C unless otherwise specified.
➁ Off-State dv/dt test method per EIA/NARM standard
RS-343, paragraph 13.11.1
➂ Inductive loads should be diode suppressed.
FastFax Document No. 111
SERIES MP
Rev. 041702
PAGE 1 OF 2
All M odels
3-32
3.0
1.0
2.6
1500
©2002 CRYDOM CORP, Specifications subject to change without notice.
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
GERMANY: +49 (0)180 3000 506
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet MP120D3.PDF ] |
Número de pieza | Descripción | Fabricantes |
MP120D2 | Solid-State Relays | OPTO22 |
MP120D3 | Zero Cross0.02-3 Amps RMS12-140 Volts RMS3-32 Control - Volts DC | Crydom Corporation |
MP120D4 | Solid-State Relays | OPTO22 |
MP120D4 | Soild State Relay | Opto 22 |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |