Datasheet.kr   

IP113F 데이터시트 PDF




ICp에서 제조한 전자 부품 IP113F은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 IP113F 자료 제공

부품번호 IP113F 기능
기능 Managed 10/100Base-TX / FX Media Converter
제조업체 ICp
로고 ICp 로고


IP113F 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 46 페이지수

미리보기를 사용할 수 없습니다

IP113F 데이터시트, 핀배열, 회로
www.DataSheet4U.com
IP113F
Preliminary Data Sheet
Managed 10/100Base-TX / FX Media Converter
Features
A 10/100BASE-TX/ 100BASE-FX converter
with a SMI port for management
Built in a 10/100BASE-TX transceiver
Built in a PHY for 100BASE-FX
Built in a 2-port switch
– Pass all packets without address and
CRC check (optional)
– Supports modified cut-through frame
forwarding for low latency
– Supports pure converter mode data
forwarding for extreme low latency
– Supports flow control for full and half
duplex operation
– Bandwidth control
– Forward 1600 bytes packet for
management
– Optional forward fragments
Built in 128Kb RAM for data buffer
Supports 3.3v I/O tolerance SMI (MDC, MDIO)
and MII registers for management
– Configure local and remote IP113F
through local SMI
– Monitor local and remote IP113F through
local SMI
– Configure/ monitor TP port support
(auto-negotiation or force 10M/100M,
full/half)
– Configure/ monitor flow control, bandwidth
– Supports loop back test (In-band or
out-band, auto or program)
– The maintenance frame is compatible to
TS-1000 standard (the
Telecommunication Technology
Committee, TTC)
Supports Statistic Counters
Supports auto MDI-MDIX function
Supports link fault pass through function
Supports far end fault function
LED display for link/activity, full/half, 10/100
Built in a watchdog timer to monitor internal
switch error
Supports EEPROM Configuration
0.25u CMOS technology
Single 2.5V power supply
48-pin LQFP package
General Description
IP113F can be a 10/100BASE-TX to 100BASE-FX
converter or a 100BASE-FX to 100BASE-FX
repeater with an SMI port for management. It
consists of a 2-port switch controller, a fast
Ethernet transceiver and a PHY for 100BASE-FX.
The transceivers in IP113F are designed in DSP
approach with advance 0.25um technology; this
results in high noise immunity and robust
performance.
IP113F not only supports store and forward mode,
it also supports modified cut through mode and
pure converter mode for low latency data
forwarding. IP113F can transmit packet(s) up to
1600 bytes to meet requirement of extra long
packets.
IP113F supports remote management function.
IP113F supports remote access functions and it
also supports remote monitor and loop back test
function defined in TS-1000 spec. Local IP113F
can access the MII register of remote IP113F by
programming local IP113F’s MII registers via SMI
connection. IP113F implements the management
function using the maintenance frame defined in
TS-1000 spec.
IP113F supports IEEE802.3x, collision base
backpressure, and various LED functions, etc.
These functions can be configured to fit the
different requirements by feeding operation
parameters via EEPROM interface or pull
up/down resistors on specified pins.
Confidential.
Copyright © 2003, IC Plus Corp.
1/46
Aug. 20, 2003
IP113F-DS-R02




IP113F pdf, 반도체, 판매, 대치품
www.DataSheet4U.com
PIN Diagram
IP113F
Preliminary Data Sheet
AVCC
BGRES
AUTO_TEST
GND
RXIP
RXIM
AVCC
TXOP
TXOM
GND
AVCC
ADDR1
1
2
3
4
5
6
7
8
9
10
11
12
IP113F
36 LED_FX_LINK/ FX_FULL
35 GND_IO
34 VCC_IO
33 LED_TP_SPD/ TWO_FIBER
32 LED_TP_FDX/ ADDR3
31 LED_TP_LINK/ ADDR4
30 LED_FX_FEF_DET/ DUPLEX_MODE
29 LED_RMT_TP_LINK/ X_EN
28 RESETB
27 TSE
26 TSM
25 LED_RMT_TP_SPD/ AUTO_SEND
Confidential.
Copyright © 2003, IC Plus Corp.
4/46
Aug. 20, 2003
IP113F-DS-R02

4페이지










IP113F 전자부품, 판매, 대치품
www.DataSheet4U.com
IP113F
Preliminary Data Sheet
1. PIN Description (continued)
Pin no.
Label
Type
Description
LED pins used as initial setting mode during reset
29 X_EN
IPH IEEE 802.3X enable on TP port and fiber port
1: enable (default),
0: disable
24 TP_FORCE
IPL Local TP port auto negotiation enable
1: TP port supports auto-negotiation with limited capability
defined in SPEED_MODE and DUPLEX_MODE.
0: TP port supports auto-negotiation with 10M/100M, full/
half capability (default)
The default value may be updated by either programming
EEPROM register 3.5 or MII register 20.13.
38
SPEED_MODE
IPH Local TP port speed
1: TP port has the 100Mb speed ability
0: TP port has the 10Mb speed ability only
It is valid only if TP_FORCE is enabled.
30
DUPLEX_MODE
IPH Local TP port duplex
1: TP port has the Full duplex ability
0: TP port has the Half duplex ability only
It is valid only if TP_FORCE is enabled.
25
AUTO_SEND
IPL Auto send the status to the remote IP113F
1: enable
0: disable (default)
36 FX_FULL
IPH Set the duplex of fiber port
1: full duplex (default)
0: half duplex
3
AUTO_TEST
IPL Auto loop back test
1: enable
When IP113F detects a low-to-high transition on this pin, it
will perform loop back test for once.
0: disable (default)
Confidential.
Copyright © 2003, IC Plus Corp.
7/46
Aug. 20, 2003
IP113F-DS-R02

7페이지


구       성 총 46 페이지수
다운로드[ IP113F.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
IP113A

LAN Transceiver - Datasheet Reference

ICp
ICp
IP113ALF

10 /100Base-Tx/Fx Media Converter

ICp
ICp

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵