Datasheet.kr   

TSXPSY 데이터시트 PDF




SCHNEIDER에서 제조한 전자 부품 TSXPSY은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 TSXPSY 자료 제공

부품번호 TSXPSY 기능
기능 (TSXPSY / TSXRKY) Premium PLCs
제조업체 SCHNEIDER
로고 SCHNEIDER 로고


TSXPSY 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 30 페이지수

미리보기를 사용할 수 없습니다

TSXPSY 데이터시트, 핀배열, 회로
Premium PLCs
TSXRKY / TSX PSY
Racks/Power Supplies
www.DataSheet4U.com
Quick Reference Guide




TSXPSY pdf, 반도체, 판매, 대치품
General safety advice for users
1 General
This manual is intended for personnel technically qualified to install, operate and maintain
the products which are described herein. For advanced use of these products please
contact your nearest sales office for additional information.
The contents of this manual are not contractual and cannot under any circumstance
extwenwdwor.DreasttariScthceoenttr4aUct.cwoarmranty clauses.
2 Qualification of personnel
Only qualified personnel are authorized to install, operate or maintain the products. Any
work performed by an unqualified person or non-observance of the safety instructions
contained in this document or attached to the equipment may jeopardize the safety of
personnel and/or cause irreparable damage to equipment.
3 Warnings
Warnings serve to prevent specific risks encountered by personnel and/or equipment.
They are indicated in the documentation and on the products by different warning
symbols.
Caution
Indicates that not following instructions or ignoring the warning may cause serious personal
injury, death and/or serious damage to equipment.
Important or !
Indicates that not following a specific instruction may lead to minor injury and/or damage
to equipment.
Comment
Highlights important information relating to the product, its operation or its accompanying
documentation.
4 Conformity of use
The products described in this manual conform to the European Directives (*) to which
they are subject (CE marking). However, they can only be used correctly in the context
of the applications for which they are intended (described in the various documents) and
when connected to approved third party products.
(*) EMC and LV Directives, concerning Electromagnetic Compatibility and Low Voltage.
5 Installing and setting up equipment
It is important to observe the following rules when installing and starting up equipment.
In addition, if the installation includes digital links, it is essential to follow the basic wiring
rules, given in the manual "Electromagnetic Compatibility of Industrial Networks and
Fieldbuses", reference TSX DG KBLE.
• Safety instructions must be followed meticulously. These instructions are in the documentation
or on the equipment being installed and set up.
• The type of equipment defines the way in which it should be installed :
- A flush-mountable device (for example, a process control terminal) must be flush-
mounted
- A device which is to be built in (for example, a PLC) must be placed in a cabinet or
enclosure
- The casing of a laptop or portable device (for example, a programming terminal or a
notebook) must remain closed
2

4페이지










TSXPSY 전자부품, 판매, 대치품
TSX RKYiistandard racks and TSX RKYiiEX extendable racks
Physical description
The rack shown below is a TSX RKY 8EX extendable rack. Standard racks do not comprise
micro-switches (label 10) and 9-pin SUB D connectors (label 11).
10 4 3
1
www.DataSheet4U.com
9
6
11
6
86
11
7
6
9
52
1 Metal plate acting as support for the Bus X electronic card and protection for the bus
against EMI/ESD interference, module support and mechanical reinforcement for the
rack.
2 Apertures for anchoring the module pins.
3 48-pin female 1/2 DIN connectors for connecting the rack to the modules. They are protected
by covers which should be removed before the modules are installed. The connector located
furthest to the left and marked PS is always dedicated to the rack power supply module; the
other connectors marked 00 to ii can take all the other type of modules.
4 Tapped holes for the module fixing screw.
5 Aperture which ensures correct location when a power supply module is fitted which cannot
be mounted in any other position.
6 Holes for M6 screw for fitting the rack on a support.
7 Location for marking the rack address.
8 Location for marking the station network address.
9 Ground terminals for grounding the rack.
10 Micro-switches for coding the rack address. These micro-switches are only present on TSX
RKY 4EX/6EX/8EX/12EX extendable racks.
11 9-pin female SUB D connectors for locating Bus X remotely on another rack. These
connectors are only present on TSX RKY 6EX/6EX/8E/X12EX extendable racks.
5

7페이지


구       성 총 30 페이지수
다운로드[ TSXPSY.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
TSXPSY

(TSXPSY / TSXRKY) Premium PLCs

SCHNEIDER
SCHNEIDER

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵