|
|
Número de pieza | KKA8395N | |
Descripción | SECAM decoder | |
Fabricantes | KODENSHI KOREA | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de KKA8395N (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! www.DataSheet4U.com
TECHNICAL DATA
SECAM decoder
KKA8395N
FEATURES
•Fully integrated filters
•Alignment free
•For use with baseband delay
GENERAL DESCRIPTION
The KKA8395N is a self-calibrating, fully integrated SECAM
decoder. The IC should preferably be used in conjunction with the
PAL/NTSC decoder KKA8362ANS (TDA8362A) or TDA8366 and with
the switched capacitor baseband delay circuit ILA4661 (TDA4661,
TDA4660). The IC incorporates HF and LF filters, a demodulator and an
identification circuit (luminance is not processed in this IC). The IC needs
no adjustments and very few external components are required. A highly
stable reference frequency is required for calibration and a two-level
sandcastle pulse for blanking and burst gating.
16
1
8
ORDERING INFORMATION
KKA8395N
DIP
TA = -40° to 125°C
QUICK REFERENCE DATA
SYMBOL
Vp
V16(p-p)
Tstg
Tamb
PARAMETER
Positive supply voitage; pin 3
Composite video input voltage
(peak -to- peak value); pin 16
Storage temperature range
Operation ambient temperature range
MIN.
7.2
-
-25
-25
MAX.
8.8
1.5
+150
+70
UNIT
V
V
°C
°C
1
1 page www.DataSheet4U.com
KKA8395N
SYMBOL
Ved
Vdd
Is
Identification
ti
H
PARAMETER
SECAM enable detection
level; pin 1
SECAM disabled detection
level; pin 1
sink current at SECAM
identification; pin 1
Identification time
colour on/off hysteresis
CONDITIONS MIN.
-
Note 8
1.5
Note 9
-
TYP.
2.8
2.0
150
MAX. UNIT
3.3 V
-V
- µA
- 4 - frames
3-
- dB
Notes to the characteristics
1.If measured in the burst-period of a blue line.
2.The video input is AC-coupled.
3.During scan.
4. Measured as 100% x (IVuI - IVII) / (IVuI + IVlI); see Fig.3.
5. Converted to input frequency error.
6. Defined as the ratio between the peak-to-peak value of the B-Y component of the demodulated 100/75 colour bar
and the peak-to-peak value of the noise.
7. The reference should be stable during frame blanking.
8. The SECAM enable and disable timing should preferably be at the end of the frame blanking.
9. The externally supplied voltage should exceed 0.5 V.
5
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet KKA8395N.PDF ] |
Número de pieza | Descripción | Fabricantes |
KKA8395N | SECAM decoder | KODENSHI KOREA |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |