|
|
PDF BLF6G20LS-180RN Data sheet ( Hoja de datos )
| Número de pieza | BLF6G20LS-180RN | |
| Descripción | Power LDMOS Transistor | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BLF6G20LS-180RN (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
BLF6G20-180RN;
BLF6G20LS-180RN
Power LDMOS transistor
Rev. 01 — 17 November 2008
Product data sheet
1. Product profile
1.1 General description
180 W LDMOS power transistor for base station applications at frequencies from
1800 MHz to 2000 MHz.
Table 1. Typical performance
Typical RF performance at Tcase = 25 °C in a class-AB production test circuit.
Mode of operation
f
VDS PL(AV) Gp ηD IMD3
(MHz)
(V) (W) (dB) (%) (dBc)
2-carrier WCDMA
1930 to 1990 30 40
17.2 27
−38[1]
ACPR
(dBc)
−41[1]
[1] Test signal: 3GPP; test model 1; 64 DPCH; PAR = 7 dB at 0.01 % probability on CCDF per carrier;
carrier spacing 10 MHz.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features
I Typical 2-carrier WCDMA performance at frequencies of 1930 MHz and 1990 MHz, a
supply voltage of 30 V and an IDq of 1400 mA:
N Average output power = 40 W
N Power gain = 17.2 dB
N Efficiency = 27 %
N IMD3 = −41 dBc
N ACPR = −38 dBc
I Easy power control
I Integrated ESD protection
I Enhanced ruggedness
I High efficiency
I Excellent thermal stability
I Designed for broadband operation (1800 MHz to 2000 MHz)
I Internally matched for ease of use
1 page  
www.DNatXaSPheSete4Um.coicmonductors
BLF6G20(LS)-180RN
Power LDMOS transistor
7.4 2-carrier W-CDMA
19
Gp
(dB)
18
17
Gp
ηD
001aai654
40
ηD
(%)
30
20
−30
IMD,
ACPR
(dBc)
−35
−40
−45
−50
001aai655
IMD3
ACPR
16
0
10
20 40 60
PL(AV) (W)
Fig 4.
VDS = 30 V; IDq = 1400 mA; f = 1960 MHz (±5 MHz);
carrier spacing 10 MHz.
2-carrier W-CDMA power gain and drain
efficiency as function of average load power;
typical values
−55
0
20 40 60
PL(AV) (W)
Fig 5.
VDS = 30 V; IDq = 1400 mA; f = 1960 MHz (±5 MHz);
carrier spacing 10 MHz.
2-carrier W-CDMA adjacent channel power
ratio and third order intermodulation distortion
as function of average load power; typical
values
8. Test information
VGG
C11
R2
C8
C7
R1
C6
C9 C2
C5
input
C4
C1
C3
C10
The drawing is not to scale.
Fig 6. Test circuit for operation at 2000 MHz
VDD
C25
C16 C17 C18 C21 C23
C12
C13
C14
output
C15 C19 C20 C22 C24
001aai656
BLF6G20-180RN_20LS-180RN_1
Product data sheet
Rev. 01 — 17 November 2008
© NXP B.V. 2008. All rights reserved.
5 of 12
5 Page 
www.DNatXaSPheSete4Um.coicmonductors
BLF6G20(LS)-180RN
Power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet Development
Preliminary [short] data sheet Qualification
Product [short] data sheet
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
12.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
13. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BLF6G20-180RN_20LS-180RN_1
Product data sheet
Rev. 01 — 17 November 2008
© NXP B.V. 2008. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet BLF6G20LS-180RN.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BLF6G20LS-180RN | Power LDMOS Transistor | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |