Datasheet.kr   

LA72912V 데이터시트 PDF




Sanyo Semicon Device에서 제조한 전자 부품 LA72912V은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 LA72912V 자료 제공

부품번호 LA72912V 기능
기능 FM Modulator and Demodulator IC
제조업체 Sanyo Semicon Device
로고 Sanyo Semicon Device 로고


LA72912V 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 12 페이지수

미리보기를 사용할 수 없습니다

LA72912V 데이터시트, 핀배열, 회로
Ordering number : ENA1409
www.DataSheet4U.com
LA72912V
Monolithic Linear IC
FM Modulator and
Demodulator IC
Overview
The LA72912V is a FM modulation and demodulation single-chip IC. Its adjustment free modulation/demodulation circuit
significantly reduces the number of peripheral circuits required and can contribute to lower production costs.
Functions
ASK modulation and demodulation
Video signal FM modulation and demodulation
Video signal emphasis and de-emphasis function
Drop-Out detecting function of Video FM signal
FM mute function at Second-Call
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Symbol
VCC max
Pd max
Operating temperature
Topr
Ta 70°C *
Storage temperature
Tstg
* Mounted on a 114.3mm × 76.1mm × 1.6mm, glass epoxy board.
Conditions
Ratings
7.0
300
-30 to +70
-40 to +150
Unit
V
mW
°C
°C
Recommended Operating Conditions at Ta = 25°C
Parameter
Recommended supply voltage
Allowable operating voltage range
Symbol
VCC
VCC op
Conditions
Ta = -30 to +70°C
Ratings
5.0
4.7 to 5.5
Unit
V
V
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
21809 MS 20090128-S00005 No.A1409-1/12




LA72912V pdf, 반도체, 판매, 대치품
www.DaAtaSSKheBetl4oUc.ckoTm17=0.4V
Parameter
Symbol
Current dissipation at
standby
Current dissipation at
standby at
MOD-AGC-OFF
Current dissipation at
standby at
DEMOD-AGC-OFF
Standby release time(1)
(FM stoprelease)
Standby release time(2)
(Video signal stop
release)
ICCS
ICCSb
ICCSc
SASK1
SASK2
ASK Transmitting time
“transmission”
ASK Transmitting time
“Receive”
ASK transmission
setup time
ASK minimum detect
level
ASK start up time
ASK demodulation
duty ratio
TASK1
TASK2
WASK
VASK
OASK
DASK
LA72912V
In OUT
Conditions
T17 At standby mode, measures include current to
pin2,9. T17 = 0.4V, T15 and T20:open
T17 At standby mode, measures include current to
T15 pin2,9. T17 = 0.4V, T15 = 5V, T20:open
T17
T15
T20
T6 T3
T17
T6 T3
T5A
T17
T10A T12
T11
T16A T13
T10A T12
T11
T16A T13
T16A T13
T16A T13
At standby mode, measures include current to
pin2,9. T17 = 0.4V, T15 = 5V, T20 = 5V
T6 = 2.0VDC T17 = 0V2V (Standby release)
Time until FM carrier is output to T3.
T6 = 0.4V, T5 = DEV = 2.0MHz 100% white video
signal of FM signal. T17 = 0V 2V (Standby
release)
Time until white 100% signal is output to T3
T10A = 1MHz,0/2V Pulse T11 = 20KHz,
0/2VPulse. Measure T12 signal appear time
T16 = 1MHz, 300mVp-p-SIN wave
Measure time T13 appear detected T16 signal
T10A = 1MHz, 0-2V-pulse T11 = 20KHz,0-2V-pulse
Measure T11 input interval time when T10A input
Measure T16 minimum level at T13 is normally
condition
Measure time ASK working from Power-ON
T16 = T12 output signal (0-2Vp-p)
Measure ASK Duty difference with 50%
DASK = (pulse width µs / 50µs) - 50% × 100%
min
10.8
12.8
16.8
0.0
2.0
0.2
-
-15
Ratings
typ
13.0
16.0
21.0
6.0
7.0
10
30
-2
max
15.5
Unit
mA
19.2 mA
25.2 mA
12.0 µs
12.0 µs
0.1 ms
0.1 ms
100 ms
3 Vp-p
300 ms
11 %
No.A1409-4/12

4페이지










LA72912V 전자부품, 판매, 대치품
LA72912V
www.DaPtaiSnheFetu4Un.ccotmion
Pin No.
Pin name
1 Emphasis filter
2 VCC5V
3 FM/Video Output
4 4V Regulator
5 FM/VD input
6 MOD/DEMOD Control
7 TC1(MOD)/
FMAGC monitor
Out control
8 TC2(DEMOD)/
FMAGC monitor
Output
9 ASK-VCC5V
10 ASK CAR IN
11 ASK DATA IN
12 ASK TX Output
13 ASK RX Output
14 ASK DET filter
15 ASK AGC filter
/AGC OFF
16 ASK RX input
17 Standby control
18 DOC-OUT
/2nd-Call input
19 B-GND
20 FM AGC filter
21 De-emphasis filter
22 A-GND
23 De-emphasis output
/V-2V select
24 Video input
FM MOD mode(Outside camera)
Emphasis filter connection pin
VCC for FM modulation.
FM Output
(RO=200:1.8Vp-p)
FM modulate block and ASK bock
supply reference voltage.
VD Input.
(Hi: over 2V, Low: under 0.4V)
(VD DET: High)
Set over 2V DC voltage.
Set capacitor for TC1
Set capacitor for TC2
VCC for ASK
ASK carrier Input.
(Recommend below 3Vp-p)
ASK Data Input.
(Hi: more than 2V, Lo: below 0.4V)
ASK modulated signal Output
ASK Demodulated Output
ASK Detector filter
AGC filter for ASK. (When AGC
operate voltage is 0V to 3V, AGC stop
when you add over 4.5V.)
ASK Demodulate Input
FM blocks standby control. (FM block
operate: over 2V, FM block standby:
under 0.4V )
2ND-Call input, 2ND-Call: Low (High:
over 2V, Low: under 0.4V)
Circuit GND
Emphasis monitor output
Non connect(Hi-Z)
Circuit GND
DFF for V-diff control
(ON: over 2V, OFF: under 0.4V)
Video signal input.
(from outside CCD camera: 1Vp-p).
FM DEMOD mode(Inside Monitor)
Non connect(Hi-Z)
VCC for FM demodulation.
Video Output
(RO=1k: 2Vp-p)
FM demodulate block and ASK bock
supply reference voltage.
FM Input.
(Recommend Level: 100 to 620mVp-p)
Note
If you no need, this pin is open.
Push-pull output
DEMOD mode: Set
3.3V by internal bias. (34k/66k)
Set under 0.4V DC voltage.
FMAGC monitor out control
GND: Monitor ON / VCC: Monitor OFF
Outside camera /
Inside monitor setting.
Can do second inside monitor
addition
FMAGC monitor output
Can do second inside monitor
addition
2.1V by internal bias. (50k)
Push-pull output
Open collector output
ASK carrier detect = Lo
3.3V by internal bias. (34k/66k)
DOC output
(When DO-DET, output is Low)
FM AGC control filter (AGC-ON:0 to
3V DC, AGC-OFF:4.5V to 5V by
external DC voltage.)
De-emphasis filter connection pin.
DE-emphasis output
Video signal input.
(from de-emphasis block: 0.5Vp-p).
DEMOD mode:
Open collector output.
MOD mode: Don’t connect
capacitor.
If you don’t need, this pin is open.
MOD mode;
VD diff. Count select
0V : VD through
2V : VD 1/2 diff
MOD mode: Maximum video input
level is 1.5Vp-p.
No.A1409-7/12

7페이지


구       성 총 12 페이지수
다운로드[ LA72912V.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
LA72912V

FM Modulator and Demodulator IC

Sanyo Semicon Device
Sanyo Semicon Device
LA72912V

FM Modulator and Demodulator IC

ON Semiconductor
ON Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵