|
|
Número de pieza | RP103x | |
Descripción | LOW NOISE 150mA LDO REGULATOR | |
Fabricantes | RICOH electronics devices division | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RP103x (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
No Preview Available ! RP103x SERIES
LOW NOISE 150mA LDO REGULATOR
NO.EA-149-070720
OUTLINE
The RP103x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference
unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the RP103x Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are PLP1010-4,
SOT23-5, SC82-AB, therefore high density mounting of the ICs on boards is possible.
FEATURES
• Supply Current .............................................................Typ. 36µA
• Standby Mode ..............................................................Typ. 0.1µA
• Dropout Voltage............................................................Typ. 0.21V (IOUT=150mA, VOUT=2.8V)
• Ripple Rejection ...........................................................Typ. 75dB (f=1kHz)
• Temperature-Drift Coefficient of Output Voltage ..........Typ. ±30ppm/°C
• Line Regulation ............................................................Typ. 0.02%/V
• Output Voltage Accuracy..............................................±1.0%
• Packages......................................................................PLP1010-4, SOT-23-5, SC-82AB
• Input Voltage Range.....................................................1.7V to 5.25V
• Output Voltage..............................................................1.2V, 1.3V, 1.5V, 1.8V, 1.85V, 1.9V, 2.0V, 2.3V, 2.5V
2.6V, 2.7V, 2.8V, 2.85V, 2.9V, 3.0V, 3.1V, 3.3V
www.Data•ShBeeut4ilUt-.icnomFold Back Protection Circuit.............................Typ. 40mA (Current at short mode)
• Ceramic capacitors are recommended to be used with this IC .... 0.47µF or more
APPLICATIONS
• Power source for portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
• Power source for home appliances.
1
1 page RP103x
ELECTRICAL CHARACTERISTICS
• RP103xxx1B/D
VIN=Set VOUT+1V for VOUT options greater than 1.5V. VIN=2.5V for VOUT <= 1.5V.
IOUT=1mA, CIN=COUT=0.47µF, unless otherwise noted.
values indicate -40°C <= Ta <= 85°C, unless otherwise noted.
Symbol
Item
VOUT Output Voltage
IOUT
∆VOUT/
∆IOUT
Output Current
Load Regulation
VDIF Dropout Voltage
ISS Supply Current
Istandby Supply Current (Standby)
∆VOUT/
∆VIN
Line Regulation
www.DataSheet4U.com
RR Ripple Rejection
VIN
∆VOUT/
∆Topt
Ilim
IPD
Input Voltage*
Output Voltage
Temperature Coefficient
Short Current Limit
CE Pull-down Current
Conditions
Topt=25°C
VOUT > 2.0V
VOUT <= 2.0V
VOUT > 2.0V
-40°C <= Topt <= 85°C
VOUT <= 2.0V
Min.
×0.99
−20
×0.985
−30
150
1mA <= IOUT <= 150mA
IOUT=150mA
IOUT=0mA
VCE=0V
1.2V <= VOUT < 1.5V
1.5V <= VOUT < 1.7V
1.7V <= VOUT < 2.0V
2.0V <= VOUT < 2.5V
2.5V <= VOUT < 2.8V
2.8V <= VOUT <= 3.3V
Set VOUT+0.5V <= VIN <= 5.0V
f=1kHz, Ripple 0.2Vp-p
VIN=Set VOUT+1V, IOUT=30mA
(In case that VOUT <= 2.0V, VIN=3.0V)
1.7
−40°C <= Topt <= 85°C
VOUT=0V
Typ.
10
0.50
0.38
0.34
0.28
0.22
0.21
36
0.1
0.02
75
±30
40
0.3
Topt=25°C
Max. Unit
×1.01 V
+20 mV
×1.015 V
+30 mV
mA
30 mV
0.62
0.47
0.42
0.36
0.30
0.27
50
1.0
V
µA
µA
0.10 %/V
dB
5.25 V
ppm
/°C
mA
µA
VCEH CE Input Voltage "H"
1.5 V
VCEL
en
RLOW
CE Input Voltage "L"
Output Noise
Low Output Nch Tr.
ON Resistance
(of D version)
BW=10Hz to 100kHz
IOUT=30mA
VIN=4.0V
VCE=0V
0.3 V
60 µVrms
30 Ω
*) When Input Voltage is 5.5V, the total operational time must be within 500hrs.
5
5 Page RP103x
4) Output Voltage vs. Temperature (C1=0.47µF, C2=0.47µF, IOUT=1mA)
1.25
1.24
1.23
1.22
1.21
1.20
1.19
1.18
1.17
1.16
1.15
-40 -25
RP103x121x
VIN=2.2V
0 25 50 75 85
Temperature Topt (°C)
2.55
2.54
2.53
2.52
2.51
2.50
2.49
2.48
2.47
2.46
2.45
-40 -25
RP103x251x
VIN=3.5V
0 25 50 75 85
Temperature Topt (°C)
3.35
3.34
3.33
3.32
3.31
3.30
3.29
3.28
3.27
3.26
3.25
-40 -25
www.DataSheet4U.com
RP103x331x
VIN=4.3V
0 25 50 75 85
Temperature Topt (°C)
5) Supply Current vs. Temperature (C1=0.47µF, C2=0.47µF, IOUT=0mA)
RP103x121x
VIN=2.2V
40
RP103x251x
VIN=3.5V
40
38 38
36 36
34 34
32 32
30
-40 -25 0 25 50
Temperature Topt (°C)
75 85
30
-40 -25 0 25 50
Temperature Topt (°C)
75 85
11
11 Page |
Páginas | Total 29 Páginas | |
PDF Descargar | [ Datasheet RP103x.PDF ] |
Número de pieza | Descripción | Fabricantes |
RP1032 | 674.03 MHz SAW Resonator | RF Monolithics |
RP103K | MARK INFORMATIONS SERIES MARK SPECIFICATION | RICOH electronics devices division |
RP103N | MARK INFORMATIONS SERIES MARK SPECIFICATION | RICOH electronics devices division |
RP103x | LOW NOISE 150mA LDO REGULATOR | RICOH electronics devices division |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |