|
|
PDF MTD15N06V Data sheet ( Hoja de datos )
| Número de pieza | MTD15N06V | |
| Descripción | TMOS POWER FET 15 AMPERES 60 VOLTS | |
| Fabricantes | Motorola Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MTD15N06V (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MTD15N06V/D
Designer's
™ Data Sheet
TMOS V
Power Field Effect Transistor
DPAK for Surface Mount
N–Channel Enhancement–Mode Silicon Gate
TMOS V is a new technology designed to achieve an on–resis-
tance area product about one–half that of standard MOSFETs. This
new technology more than doubles the present cell density of our
50 and 60 volt TMOS devices. Just as with our TMOS E–FET
designs, TMOS V is designed to withstand high energy in the
avalanche and commutation modes. Designed for low voltage, high
speed switching applications in power supplies, converters and
power motor controls, these devices are particularly well suited for
bridge circuits where diode speed and commutating safe operating
areas are critical and offer additional safety margin against
unexpected voltage transients.
MTD15N06V
Motorola Preferred Device
TMOS POWER FET
15 AMPERES
60 VOLTS
RDS(on) = 0.12 OHM
TM
D
New Features of TMOS V
• On–resistance Area Product about One–half that of Standard
MOSFETs with New Low Voltage, Low RDS(on) Technology
• Faster Switching than E–FET Predecessors
G
CASE 369A–13, Style 2
DPAK Surface Mount
S
Features Common to TMOS V and TMOS E–FETS
• Avalanche Energy Specified
• IDSS and VDS(on) Specified at Elevated Temperature
• Static Parameters are the Same for both TMOS V and TMOS E–FET
• Surface Mount Package Available in 16 mm 13–inch/2500 Unit Tape & Reel, Add T4 Suffix to Part Number
MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Drain–Source Voltage
VDSS
60
Vdc
Drain–Gate Voltage
www.DataSheet4U.com
(RGS
=
1.0
MΩ)
Gate–Source Voltage — Continuous
Gate–Source Voltage — Single Pulse (tp ≤ 50 ms)
VDGR
VGS
VGSM
60
± 20
± 25
Vdc
Vdc
Vpk
Drain Current — Continuous @ 25°C
Drain Current — Continuous @ 100°C
Drain Current — Single Pulse (tp ≤ 10 µs)
ID 15 Adc
ID 8.7
IDM 45 Apk
Total Power Dissipation @ 25°C
Derate above 25°C
Total Power Dissipation @ TA = 25°C, when mounted to minimum recommended pad size
PD 55 Watts
0.36 W/°C
2.1 Watts
Operating and Storage Temperature Range
TJ, Tstg – 55 to 175
°C
Single Pulse Drain–to–Source Avalanche Energy — Starting TJ = 25°C
(VDD = 25 Vdc, VGS = 10 Vdc, IL = 15 Apk, L = 1.0 mH, RG = 25 Ω)
EAS
113
mJ
Thermal Resistance — Junction to Case
RθJC 2.73 °C/W
Thermal Resistance — Junction to Ambient
RθJA
100
Thermal Resistance — Junction to Ambient, when mounted to minimum recommended pad size
RθJA
71.4
Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 10 seconds
TL 260 °C
Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit
curves — representing boundaries on device characteristics — are given to facilitate “worst case” design.
E–FET, Designer’s and TMOS V are trademarks of Motorola, Inc. TMOS is a registered trademark of Motorola, Inc.
Thermal Clad is a trademark of the Bergquist Company.
Preferred devices are Motorola recommended choices for future use and best overall value.
REV 2
© MMoototororloa,laIncT.M19O96S Power MOSFET Transistor Device Data
1
1 page  
12
10
8
Q1
6
QT
Q2
VGS
60
50
40
30
4 20
ID = 15 A
2 TJ = 25°C 10
0 Q3
VDS
0
0 3 6 9 12 15
QT, TOTAL CHARGE (nC)
Figure 8. Gate–To–Source and Drain–To–Source
Voltage versus Total Charge
1000
VDD = 30 V
ID = 15 A
VGS = 10 V
TJ = 25°C
100
tr
tf
td(off)
10 td(on)
MTD15N06V
1
1 10 100
RG, GATE RESISTANCE (OHMS)
Figure 9. Resistive Switching Time
Variation versus Gate Resistance
DRAIN–TO–SOURCE DIODE CHARACTERISTICS
15
VGS = 0 V
TJ = 25°C
12
9
6
3
www.DataSheet4U.com
0
0.5 0.7 0.9 1.1 1.3 1.5
VSD, SOURCE–TO–DRAIN VOLTAGE (VOLTS)
Figure 10. Diode Forward Voltage versus Current
SAFE OPERATING AREA
The Forward Biased Safe Operating Area curves define
the maximum simultaneous drain–to–source voltage and
drain current that a transistor can handle safely when it is for-
ward biased. Curves are based upon maximum peak junc-
tion temperature and a case temperature (TC) of 25°C. Peak
repetitive pulsed power limits are determined by using the
thermal response data in conjunction with the procedures
discussed in AN569, “Transient Thermal Resistance–General
Data and Its Use.”
Switching between the off–state and the on–state may tra-
verse any load line provided neither rated peak current (IDM)
nor rated voltage (VDSS) is exceeded and the transition time
(tr,tf) do not exceed 10 µs. In addition the total power aver-
aged over a complete switching cycle must not exceed
(TJ(MAX) – TC)/(RθJC).
A Power MOSFET designated E–FET can be safely used
in switching circuits with unclamped inductive loads. For reli-
able operation, the stored energy from circuit inductance dis-
sipated in the transistor while in avalanche must be less than
the rated limit and adjusted for operating conditions differing
from those specified. Although industry practice is to rate in
terms of energy, avalanche energy capability is not a con-
stant. The energy rating decreases non–linearly with an in-
crease of peak current in avalanche and peak junction
temperature.
Although many E–FETs can withstand the stress of drain–
to–source avalanche at currents up to rated pulsed current
(IDM), the energy rating is specified at rated continuous cur-
rent (ID), in accordance with industry custom. The energy rat-
ing must be derated for temperature as shown in the
accompanying graph (Figure 12). Maximum energy at cur-
rents below rated continuous ID can safely be assumed to
equal the values indicated.
Motorola TMOS Power MOSFET Transistor Device Data
5
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet MTD15N06V.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MTD15N06V | TMOS POWER FET 15 AMPERES 60 VOLTS | Motorola Semiconductors |
| MTD15N06V | Power MOSFET ( Transistor ) |  ON Semiconductor |
| MTD15N06VL | TMOS POWER FET 15 AMPERES 60 VOLTS | Motorola Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |