DataSheet.es    


PDF TS3410 Data sheet ( Hoja de datos )

Número de pieza TS3410
Descripción 1A / 1.5MHz Synchronous Buck Converter
Fabricantes Taiwan Semiconductor Company 
Logotipo Taiwan Semiconductor Company Logotipo



Hay una vista previa y un enlace de descarga de TS3410 (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! TS3410 Hoja de datos, Descripción, Manual

TS3410
1A / 1.5MHz Synchronous Bwwuwc.DkataCShoeent4vU.ecormter
SOT-25
Pin Definition:
1. EN
2. Ground
3. Switching Output
4. Input
5. Feedback
General Description
TS3410 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode
architecture. The device is available in an adjustable version. Supply current with no load is 350uA and drops to <1uA
in shutdown. The 2.5V to 6.5V input voltage range makes TS3410 ideally suited for single Li-Ion, two to four AA
battery-powered applications. 100% duty cycle provides low dropout operation, extending battery life in portable
systems. PWM pulse skipping mode operation provides very low output ripple voltage for noise sensitive applications.
Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductors and capacitors. The
internal synchronous switch increases efficiency and decreases need of an external Schottky diode. Low output
voltages are easily supported with the 0.6V feedback reference voltage.
Features
High Efficiency: Up to 96%
2.5V to 6.5V Input Voltage Range
Short Circuit Protection (SCP)
1.5MHz Constant Frequency Operation
Low Dropout Operation: 100% Duty Cycle
0.6V Reference Allows Low Output Voltages
1A Output Current at VIN=3V & VOUT=1.8V
Low Quiescent Current: 350uA
No Schottky Diode Required in Application
● ≤1uA Shutdown Current
Current Mode Operation for Excellent Line and Load
Transient Response
Ordering Information
Part No.
TS3410CX5 RF
Package
SOT-25
Packing
3Kpcs/ 7” Reel
Application
Cellular Phones
Digital Still Cameras
Portable Electronics
USB Devices
Pin Description
Name
EN
GND
SW
VCC
FB
Description
Power-off pin
H normal operation
L Step-down operation stopped
(All circuits deactivated)
Ground pin
Switch output pin. Connect external inductor
here. Minimize trace area at this pin to
reduce EMI.
IC power supply pin
Output Feedback pin
Application Circuit
1/7 Version: A08

1 page




TS3410 pdf
TS3410
1A / 1.5MHz Synchronous Bwwuwc.DkataCShoeent4vU.ecormter
Application Information (Continue)
Output Capacitor Selection
The output capacitor is required to keep the output voltage ripple small and to ensure regulation loop stability. The
output capacitor must have low impedance at the switching frequency. Ceramic capacitors with X5R or X7R dielectrics
are recommended due to their low ESR and high ripple current.
Compensation Capacitor Selection
The compensation capacitors for increasing phase margin provide additional stability. It is required and more than 22p,
Refer to Demo Board Schematic, The optimum values for C3 is 47pF.
5/7 Version: A08

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet TS3410.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
TS34101A / 1.5MHz Synchronous Buck ConverterTaiwan Semiconductor Company
Taiwan Semiconductor Company
TS34118Voice Switched Speakerphone CircuitTaiwan Semiconductor Company
Taiwan Semiconductor Company
TS34118CDVoice Switched Speakerphone CircuitTaiwan Semiconductor Company
Taiwan Semiconductor Company
TS34118CSVoice Switched Speakerphone CircuitTaiwan Semiconductor Company
Taiwan Semiconductor Company

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar