Datasheet.kr   

ACE24C32 데이터시트 PDF




ACE Technology에서 제조한 전자 부품 ACE24C32은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 ACE24C32 자료 제공

부품번호 ACE24C32 기능
기능 Two-wire Serial EEPROM
제조업체 ACE Technology
로고 ACE Technology 로고


ACE24C32 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 13 페이지수

미리보기를 사용할 수 없습니다

ACE24C32 데이터시트, 핀배열, 회로
 
www.DataSheet4U.com
ACE24C32/64                                                                                                                                                           
                                              Technology
Two-wire Serial EEPROM
Description
The ACE24C32/64 provides 32,768/65,536 bits of serial electrically erasable and programmable read-only
memory (EEPROM) organized as 4096/8192 words of 8 bits each. The device’s cascadable feature allows up to
8 devices to share a common two-wire bus. The device is optimized for use in many industrial and
commercial applications where low-power and low-voltage operations are essential.
Features
z Low Operation Voltage: Vcc = 1.7V to 5.5V
z Internally Organized: 4096 x 8,8192 x 8
z Two-wire Serial Interface
z Schmitt Trigger, Filtered Inputs for Noise Suppression
z Bi-directional Data Transfer Protocol
z 1MHz (2.5V~5.5V) and 400 kHz (1.7V) Compatibility
z Write Protect Pin for Hardware Data Protection
z 32-byte Page Write Modes (Partial Page Writes are Allowed)
z Self-timed Write Cycle (5 ms max)
z High-reliability - Endurance: 1,000,000 Write Cycles
- Data Retention: 100 Years
z TDFN ROHS compliant Packages
z Wafer Sales: available in inked wafer Form
Absolute Maximum Ratings
Operating Temperature
Storage Temperature
-55to +125
-65to +150
Voltage on Any Pin with Respect to Ground -1.0V to +7.0V
Maximum Operating Voltage
6.25V
DC Output Current
5.0 mA
*Notice: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational
sections of this specification are not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Packaging Type
TDFN
VER 1.3 1 




ACE24C32 pdf, 반도체, 판매, 대치품
 
www.DataSheet4U.com
ACE24C32/64                                                                                                                                                           
                                              Technology
Two-wire Serial EEPROM
Memory Organization
ACE24C32, 32K Serial EEPROM:
Internally organized with 128 pages of 32 bytes each, the 32K requires a 12-bit data word address for
random word addressing.
ACE24C64, 64K Serial EEPROM:
Internally organized with 256 pages of 32 bytes each, the 64K requires a 13-bit data word address for
random word addressing.
Pin Capacitance(1)
Applicable over recommended operating range from: TA = 25, f = 1.0 MHz, VCC = +1.7V.
Symbol
Test Condition
Max Units Conditions
CI
1
/O
Input / Output Capacitance (SDA) 8 pF VI/O = 0V
CIN1 Input Capacitance (A0, A1, A2, SCL) 6 pF VIN = 0V
Note: 1. This parameter is characterized and is not 100% tested.
DC Characteristics
Applicable over recommended operating range from: TA = -40to +85, VCC = +1.7V to +5.5V, (unless otherwise noted).
Symbol
Parameter
Test Condition
Min Typ Max Units
VCC Supply Voltage
1.7 5.5 V
ICC1 Supply Current
VCC = 5V, Read at 400KHz
0.4 1.0 mA
ICC2 Supply Current
VCC = 5V, Write at 400KHz
2.0 3.0 mA
ISB1 Standby Current
VCC = 1.7V, VIN = VCC/ VSS
1.0 µA
ISB2 Standby Current
VCC = 5.5V, VIN = VCC/ VSS
6.0 µA
ILI Input Leakage Current
VIN = VCC/VSS
0.10 3.0 µA
ILO
Output Leakage Current
VOUT = VCC/ VSS
0.05 3.0 µA
VIL1 Input Low Level
-0.6 VCCx0.3 V
VIH1 Input High Level
VCCx0.7
VCC+0.5 V
VOL2
Output Low Level 2
VCC = 3.0V, IOL = 2.1 mA
0.4 V
VOL1
Output Low Level 1
VCC = 1.7V, IOL = 0.15 mA
0.2 V
Note: 1. VIL min and VIH max are reference only and are not tested.
VER 1.3 4

4페이지










ACE24C32 전자부품, 판매, 대치품
 
www.DataSheet4U.com
ACE24C32/64                                                                                                                                                           
                                              Technology
Two-wire Serial EEPROM
Write Cycle Timing
Figure 3SCL: Serial Clock, SDA: Serial Data I/O
Note: The write cycle time tWR is the time from a valid stop condition of a write sequence to the end of the internal clear/write
cycle.
Figure 4Data Validity
Figure 5Start and Stop Definition
Figure 6Output Acknowledge
VER 1.3 7

7페이지


구       성 총 13 페이지수
다운로드[ ACE24C32.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ACE24C32

Two-wire Serial EEPROM

ACE Technology
ACE Technology

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵