DataSheet39.com

What is EM4125?

This electronic component, produced by the manufacturer "EM Microelectronic - MARIN SA", performs the same function as "Read Only Contactless Identification Device with Anticollision".


EM4125 Datasheet PDF - EM Microelectronic - MARIN SA

Part Number EM4125
Description Read Only Contactless Identification Device with Anticollision
Manufacturers EM Microelectronic - MARIN SA 
Logo EM Microelectronic - MARIN SA Logo 


There is a preview and EM4125 download ( pdf file ) link at the bottom of this page.





Total 1 Pages



Preview 1 page

No Preview Available ! EM4125 datasheet, circuit

EM MICROELECTRONIC - MARIN SA
www.DataSheet4U.com
EM4025/EM4125
Read Only Contactless Identification Device
with Anticollision
Features
Anticollision protocol to identify a number of
transponders (better then 20 tags/s at RF/32, 10
tags/s at RF/64)
55 bit memory array, laser programmable ROM
Two mask programmable data rate options: RF/64 and
RF/32
Data transmission reader to transponder: ASK 100%
(OOK)
Data transmission transponder to reader: ASK,
Manchester Code
On chip resonance capacitor
On chip supply buffer capacitor & voltage limiter
Large Modulation Depth
Operating frequency 100 – 150 kHz
Small chip size convenient for implantation
Typical Applications
Logistics
Manufacturing Automation
Anti-counterfeiting
Industrial transponder
Tracking and tracing
Description
The EM4025 is a CMOS integrated circuit for use in
electronic Read Only RF Transponders, often known as a
RFID Tag. The circuit is powered by an external coil
placed in an electromagnetic field, and gets its clock via
the coil terminals. The fixed code device identification is
programmed at manufacture by laser fusing of polysilicon
links. The chip starts at power up in a quiet mode.
Downlink Transmission occurs only on command from the
reader, normally as part of the anticollision/arbitration
scheme. A data rate of 64 or 32 periods of the carrier
frequency per data bit is available. Downlink Data is
Manchester Coded. Only an external coil is needed to
obtain the chip function. A parallel resonant capacitor is
integrated.
The EM4125 is the same device but with bumped
enlarged pads. All specified parameters and description
are applicable for the EM4125 device.
Typical Operating Configuration
COIL1
L EM4025
COIL2
L: typical 20.78 mH value for fO = 125 KHz
Fig. 1
Copyright © 2005, EM Microelectronic-Marin SA
Subject to change without notice
Rev. B, 02/05
Phone: +41.32.755-5111, Fax: +41.32.755-5403
www.emmicroelectronic.com


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for EM4125 electronic component.


Information Total 1 Pages
Link URL [ Copy URL to Clipboard ]
Download [ EM4125.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
EM4125The function is Read Only Contactless Identification Device with Anticollision. EM Microelectronic - MARIN SAEM Microelectronic - MARIN SA
EM412Mxxxx-xxThe function is 64Mb SDRAM. EorexEorex

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

EM41     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search