Datasheet.kr   

EL6834 데이터시트 PDF




Intersil Corporation에서 제조한 전자 부품 EL6834은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 EL6834 자료 제공

부품번호 EL6834 기능
기능 Dual 4-Channel Driver with Oscillator
제조업체 Intersil Corporation
로고 Intersil Corporation 로고


EL6834 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 2 페이지수

미리보기를 사용할 수 없습니다

EL6834 데이터시트, 핀배열, 회로
®
PRELIMINARY
Data Sheet
July 15, 2004
EL6834
www.DataSheet4U.com
FN7238.1
Dual 4-Channel Driver with Oscillator &
LVDS
The EL6834 is a high performance,
dual output, laser driver for writeable
‘super-combo’ CD - DVD drives. The
ENA pin enables the chip, while the SEL1 pin selects the
IOUT pin. Various waveforms can be generated where the
amplitude is determined by the currents flowing into IINR,
IIN2, IIN3, and IIN4. The timing is determined by the signals
at WEN2-WEN2B, WEN3-WEN3B, and WEN4-WEN4B. The
oscillator is enabled when OSEN is high. The amplified IINR
current of the selected channel is enabled when the ENA pin
is high. The total output current is the sum of the read
current, the enabled write currents, and the oscillator current
when enabled.
Usually a voltage DAC will drive a resistor that is in series
with the IINR, IIN2, IIN3, and IIN4 input. The resistor allows
the user to optimize the current gain for each channel.
Output write current pulses are enabled when a high is
applied to the WEN2-WEN2B, WEN3-WEN3B, or WEN-
WEN4B pin. The write current will flow to the selected
output. When SEL1 is high IOUT1 is selected. WENRB
enables read and oscillator current when low.
The RF oscillators frequency is determined by RFREQ1 or
RFREQ2, and its amplitude by RAMP1 or RAMP2.
Ordering Information
PART
NUMBER
EL6834CL
PACKAGE
32-Pin QFN
TAPE & REEL PKG. DWG. #
- MDP0046
EL6834CL-T7 32-Pin QFN
7”
MDP0046
EL6834CL-T13 32-Pin QFN
13”
MDP0046
EL6834CLZ
(See Note)
32-Pin QFN
(Pb-free)
-
MDP0046
EL6834CLZ-T7 32-Pin QFN
(See Note)
(Pb-free)
7”
MDP0046
EL6834CLZ-
32-Pin QFN
T13 (See Note) (Pb-free)
13”
MDP0046
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
Features
• Two channels for CD or DVD
• Voltage-controlled output current source requiring one
external set resistor per channel
• Rise time = 0.8ns
• Fall time = 0.8ns
• Channel 2 to 250mA max
• Channel 3 to 150mA max
• Channel 4 to 100mA max
• On chip oscillator with frequency and amplitude control by
use of external resistors to ground
• Oscillator frequency to 600MHz
• Internal 100LVDS termination
• Oscillator amplitude to 100mAP-P
• Single +5V supply (±10%)
• Chip ENAs for power savings
• Pb-free available
Applications
• Super combo drives
Get FULL DATASHEET
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.





구       성 총 2 페이지수
다운로드[ EL6834.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
EL6833

Dual 4-Channel Driver with Oscillator

Intersil Corporation
Intersil Corporation
EL6833

Dual 4-Channel Driver with Oscillator

Intersil Corporation
Intersil Corporation

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵