Datasheet.kr   

UCLAMP0501P PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 UCLAMP0501P
기능 1-Line ESD protection
제조업체 Semtech Corporation
로고 Semtech Corporation 로고 


전체 7 페이지

		

No Preview Available !

UCLAMP0501P 데이터시트, 핀배열, 회로
PROTECTION PRODUCTS - MicroClampTM
Description
The µClampTM series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace multilayer varistors
(MLVs) in portable applications such as cell phones, note-
book computers, and PDAs. It features large cross-sec-
tional area junctions for conducting high transient cur-
rents. It offers superior electrical characteristics such
as lower clamping voltage and no device degradation
when compared to MLVs. They offer desirable charac-
teristics for board level protection including fast response
time, low operating and clamping voltage, and no device
degradation.
The µClampTM0501P is in a 2-pin, RoHS/WEEE compli-
ant, SLP1006P2 package. It measures 1.0 x 0.6 x
0.5mm. The leads are spaced at a pitch of 0.65mm
and are finished with lead-free NiPdAu. Each device
will protect one line operating at 5 volts. It gives the
designer the flexibility to protect single lines in applica-
tions where arrays are not practical. They may be used
to meet the ESD immunity requirements of IEC 61000-
4-2, Level 4 (±15kV air, ±8kV contact discharge). The
combination of small size and high ESD surge capability
makes them ideal for use in portable applications such
as cellular phones, digital cameras, and MP3 players.
uClamp0501P
µClampTM
1-Line EwwSwD.DatpaSrheoett4eU.ccotmion
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
‹ Ultra-small package (1.0 x 0.6 x 0.5mm)
‹ Protects one I/O or power line
‹ Low clamping voltage
‹ Working voltage: 5V
‹ Low leakage current
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1006P2 package
‹ RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.0 x 0.6 x 0.5 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code, cathode band
‹ Packaging : Tape and Reel
Applications
‹ Cellular Handsets & Accessories
‹ Personal Digital Assistants (PDAs)
‹ Notebooks & Handhelds
‹ Portable Instrumentation
‹ Digital Cameras
‹ Peripherals
‹ MP3 Players
Dimensions
Schematic & PIN Configuration
1.0
0.65
0.60
2
10.50
Nominal Dimensions (mm)
SLP1006P2 (Bottom View)
Revision 10/11/2007
1
www.semtech.com




UCLAMP0501P pdf, 반도체, 판매, 대치품
PROTECTION PRODUCTS
Applications Information
Device Connection Options
These TVS diodes are designed to protect one data,
I/O, or power supply line. The device is unidirectional
and may be used on lines where the signal polarity is
above ground. The cathode band should be placed
towards the line that is to be protected.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
z Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
z Minimize the path length between the TVS and the
protected line.
z Minimize all conductive loops including power and
ground loops.
z The ESD transient return path to ground should be
kept as short as possible.
z Never run critical signals near board edges.
z Use ground planes whenever possible.
uClamp0501P
www.DataSheet4U.com
Circuit Diagram
Pin 2
Pin 1
2007 Semtech Corp.
4
www.semtech.com

4페이지










UCLAMP0501P 전자부품, 판매, 대치품
PROTECTION PRODUCTS
Marking Code
5P
Note: Cathode bar at Pin 2
PIN 1 ID
Tape and Reel Specification
uClamp0501P
www.DataSheet4U.com
Ordering Information
Part Number
Working Qty per Reel
Voltage Reel Size
uClamp0501P.TCT
5V
3,000 7 Inch
Notes:
1) This is a lead-free, RoHS/WEEE compliant product
MicroClamp, uClamp and µClamp are marks of Semtech
Corporation
Cathode Bar
User Direction of feed
A0 B0 K0
0.69 +/-0.10 mm 1.19 +/-0.10 mm 0.66 +/-0.10 mm
Device Orientation in Tape
Tape
Width
8 mm
B, (Max)
4.2 mm
(.165)
D D1
1.5 + 0.1 mm
- 0.0 mm
(0.59 +.005
- .000)
0.4 mm
±0.25
(.031)
E
1.750±.10
mm
(.069±.004)
F P P0 P2 T W
3.5±0.05
mm
(.138±.002)
4.0±0.10
mm
(.157±.00-
4)
4.0±0.1
mm
(.157±.00-
4)
2.0±0.05
mm
(.079±.002)
0.254±0.02
mm (.016)
8.0 mm
+ 0.3 mm
- 0.1 mm
(.312±.012)
Contact Information
Semtech Corporation
Protection Products Division
200 Flynn Rd., Camarillo, CA 93012
Phone: (805)498-2111 FAX (805)498-3804
2007 Semtech Corp.
7
www.semtech.com

7페이지



구       성총 7 페이지
다운로드[ UCLAMP0501P.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
UCLAMP0501H

1-Line ESD protection

Semtech Corporation
Semtech Corporation
UCLAMP0501P

1-Line ESD protection

Semtech Corporation
Semtech Corporation

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵