Datasheet.kr   

UCLAMP0506T PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 UCLAMP0506T
기능 Low Profile Clamp 6-Line ESD Protection
제조업체 Semtech Corporation
로고 Semtech Corporation 로고 


전체 7 페이지

		

No Preview Available !

UCLAMP0506T 데이터시트, 핀배열, 회로
PROTECTION PRODUCTS - MicroClamp®
Description
The μClamp® series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace single line devices such
as multilayer varistors (MLVs) in space constrained ap-
plications such as cell phones, notebook computers, and
other portable electronics. It features large cross-sec-
tional area junctions for conducting high transient cur-
rents. TVS diodes offer desirable characteristics for
board level protection including fast response time, low
operating and clamping voltage, and no device degrada-
tion.
The μClamp®0506T is in a 6-pin SLP1313P6T package.
It measures 1.3 x 1.3 mm with a nominal height of only
0.4mm. The leads are spaced at a pitch of 0.4mm
and are finished with lead-free NiPdAu. Each device
features six TVS diodes with an operating voltage of 5
volts and a maximum loading capacitance of only 10pF.
They may be used to meet the ESD immunity require-
ments of IEC 61000-4-2, Level 4 (±15kV air, ±8kV
contact discharge). The combination of small size and
high ESD surge capability makes them ideal for use in
portable applications such as cellular phones, digital
cameras, and notebook computers.
uClamp0506T
Low Profile μClamp®
6-Line EwwSwD.DatPaSrheoett4eU.ccotmion
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
‹ Ultra-small package
‹ Protects six data lines
‹ Low clamping voltage
‹ Working voltage: 5V
‹ Low capacitance (10pF)
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1313P6T package
‹ Pb-Free, Halogen Free, RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.3 x 1.3 x 0.4 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code
‹ Packaging : Tape and Reel
Applications
‹ Cellular Handsets & Accessories
‹ Notebooks & Handhelds
‹ mp3 Players
‹ Cordless Phones
‹ Portable Instrumentation
‹ Digital Cameras
‹ Peripherals
Dimensions
Schematic
1.30
123
1.30
1234 5 6
65
4
0.40 BSC
0.40
Nominal Dimensions (mm)
(SLP1313P6T Bottom View)
Revision 10/07/2009
1
Center Tab (GND)
www.semtech.com




UCLAMP0506T pdf, 반도체, 판매, 대치품
PROTECTION PRODUCTS
Applications Information
Device Connection Options
This device is designed to protect six data lines. The
device is unidirectional and may be used on lines
where the signal polarity is above ground.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
z Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
z Minimize the path length between the TVS and the
protected line.
z Minimize all conductive loops including power and
ground loops.
z The ESD transient return path to ground should be
kept as short as possible.
z Never run critical signals near board edges.
z Use ground planes whenever possible.
1
uClamp0506T
www.DataSheet4U.com
Circuit Diagram
234 5
6
Center Tab (GND)
© 2009 Semtech Corp.
4
www.semtech.com

4페이지










UCLAMP0506T 전자부품, 판매, 대치품
PROTECTION PRODUCTS
Marking Code
U506T
YW
YW = Date Code
Tape and Reel Specification
uClamp0506T
www.DataSheet4U.com
Ordering Information
Part Number
Working Qty per Reel
Voltage Reel Size
uClamp0506T.TCT 5V 3,000 7 Inch
Notes:
1) This is a lead-free, RoHS/WEEE compliant product
MicroClamp, uClamp and μClamp are marks of Semtech
Corporation
Pin 1 Location
User Direction of feed
A0 B0 K0
1.51 +/-0.05 mm 1.51 +/-0.05 mm 0.56 +/-0.05 mm
Device Orientation in Tape
Tape
Width
8 mm
B, (Max)
D
D1
4.2 mm
(.165)
1.5 + 0.1 mm
- 0.0 mm
(0.59 +.005
- .000)
0.8 mm
±0.05
(.031)
E
1.750±.10
mm
(.069±.004)
F
K
(MAX)
P
P0
P2 T(MAX) W
3.5±0.05
mm
(.138±.002)
2.4 mm
(.094)
4.0±0.1
mm
(.157±.00-
4)
4.0±0.1
mm
(.157±.00-
4)
2.0±0.05m-
m
(.079±.002)
0.4 mm
(.016)
8.0 mm
+ 0.3 mm
- 0.1 mm
(.312±.012)
Contact Information
Semtech Corporation
Protection Products Division
200 Flynn Rd., Camarillo, CA 93012
Phone: (805)498-2111 FAX (805)498-3804
© 2009 Semtech Corp.
7
www.semtech.com

7페이지



구       성총 7 페이지
다운로드[ UCLAMP0506T.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
UCLAMP0506A

5-Line ESD protection Array

Semtech Corporation
Semtech Corporation
UCLAMP0506P

6-Line ESD protection Array

Semtech Corporation
Semtech Corporation

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵