Datasheet.kr   

UCLAMP0511P PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 UCLAMP0511P
기능 1-Line ESD protection
제조업체 Semtech Corporation
로고 Semtech Corporation 로고 


전체 7 페이지

		

No Preview Available !

UCLAMP0511P 데이터시트, 핀배열, 회로
PROTECTION PRODUCTS - MicroClamp
Description
The μClampTM series of TVS arrays are designed to protect
sensitive electronics from damage or latch-up due to ESD.
It is designed to replace multilayer varistors (MLVs) in por-
table applications. It features large cross-sectional area
junctions for conducting high transient currents. It of-
fers superior electrical characteristics such as lower
clamping voltage and no device degradation when com-
pared to MLVs. They offer desirable characteristics for
board level protection including fast response time, low
operating and clamping voltage, and no device degrada-
tion.
The μClampTM0511P is in a 2-pin, RoHS/WEEE
compliant, SLP1006P2 package. It measures
1.0 x 0.6 x 0.5mm. The leads are spaced at a pitch of
0.65mm and are finished with lead-free NiPdAu. Each
device will protect one bidirectional line operating at
±5 volts. It gives the designer the flexibility to protect
single lines in applications where arrays are not practi-
cal. They may be used to meet the ESD immunity
requirements of IEC 61000-4-2, Level 4 (±15kV air,
±8kV contact discharge). The combination of small
size and high ESD surge capability makes them ideal
for use in portable applications such as cellular
phones, digital cameras, and MP3 players.
uClamp0511P
μClampTM
1-Line EwwSwD.DatpaSrheoett4eU.ccotmion
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
‹ Ultra-small package (1.0 x 0.6 x 0.5mm)
‹ Protects one I/O or power line
‹ Low clamping voltage
‹ Working voltage: 5V
‹ Low leakage current
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1006P2 package
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code
‹ Packaging : Tape and Reel
‹ Lead Finish: NiPdAu
‹ RoHS/WEEE Compliant
Applications
‹ Cellular Handsets & Accessories
‹ Cordless Phones
‹ Personal Digital Assistants (PDAs)
‹ Notebooks & Handhelds
‹ Portable Instrumentation
‹ Digital Cameras
‹ Peripherals
‹ MP3 Players
Dimensions
Schematic & PIN Configuration
1.0
0.65
0.60
2
1
0.50
Maximum Dimensions (mm)
Revision 8/15/2008
1
SLP1006P2 (Bottom View)
www.semtech.com




UCLAMP0511P pdf, 반도체, 판매, 대치품
PROTECTION PRODUCTS
Applications Information
Device Connection Options
These TVS diodes are designed to protect one data,
I/O, or power supply line. The device is bidirectional and
may be used on lines where the signal polarity can go
above abd below ground.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
z Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
z Minimize the path length between the TVS and the
protected line.
z Minimize all conductive loops including power and
ground loops.
z The ESD transient return path to ground should be
kept as short as possible.
z Never run critical signals near board edges.
z Use ground planes whenever possible.
uClamp0511P
www.DataSheet4U.com
Circuit Diagram
© 2008 Semtech Corp.
4
www.semtech.com

4페이지










UCLAMP0511P 전자부품, 판매, 대치품
PROTECTION PRODUCTS
Marking Code
O
PIN 1 ID
Tape and Reel Specification
uClamp0511P
www.DataSheet4U.com
Ordering Information
Part Number Qty per Reel
Reel Size
uClamp0511P.TCT
3,000
7 Inch
MicroClamp, uClamp and μClamp are marks of Semtech
Corporation
A0 B0 K0
0.69 +/-0.10 mm 1.19 +/-0.10 mm 0.66 +/-0.10 mm
Tape
Width
B, (Max)
D
D1
E
8 mm
4.2 mm
(.165)
1.5 + 0.1 mm
- 0.0 mm
(0.59 +.005
- .000)
0.4 mm
±0.25
(.031)
1.750±.10
mm
(.069±.004)
F P P0 P2 T W
3.5±0.05
mm
(.138±.002)
4.0±0.10
mm
(.157±.00-
4)
4.0±0.1
mm
(.157±.00-
4)
2.0±0.05
mm
(.079±.002)
0.254±0.02
mm (.016)
8.0 mm
+ 0.3 mm
- 0.1 mm
(.312±.012)
Contact Information
Semtech Corporation
Protection Products Division
200 Flynn Rd., Camarillo, CA 93012
Phone: (805)498-2111 FAX (805)498-3804
© 2008 Semtech Corp.
7
www.semtech.com

7페이지



구       성총 7 페이지
다운로드[ UCLAMP0511P.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
UCLAMP0511P

1-Line ESD protection

Semtech Corporation
Semtech Corporation
uClamp0511PQ

1-Line ESD protection

Semtech Corporation
Semtech Corporation

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵