|
|
Número de pieza | CM1400-03 | |
Descripción | 6 Channel EMI Filter Array with ESD Protection | |
Fabricantes | California Micro Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CM1400-03 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! CM1400-03www.DataSheet4U.com
6 Channel EMI Filter Array with ESD Protection
Features
• Functionally and pin compatible with CSPEMI306A
device
• OptiGuard™ coated for improved reliability at
assembly
• Six channels of EMI filtering for data ports
• Pi-style EMI filters in a capacitor-resistor-capacitor
(C-R-C) network
• 40dB absolute attenuation (typical) at 1 GHz
• 35dB attenuation (typical) at 1 GHz relative to pass
band
• ±15kV ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
• ±30kV ESD protection on each channel (HBM)
• 15-bump, 2.960mm X 1.330mm footprint
Chip Scale Package (CSP)
• Chip Scale Package features extremely low
lead inductance for optimum filter and ESD
performance
• Lead-free version available
Applications
• EMI filtering and ESD protection for both data
and I/O ports
• Wireless Handsets
• Handheld PCs / PDAs
• MP3 Players
• Notebooks
• Desktop PCs
Product Description
The CM1400-03 is a six channel low-pass filter array
that reduces EMI/RFI emissions while at the same time
providing ESD protection. It is used on data ports on
mobile devices. To reduce EMI/RFI emissions, the
CM1400-03 integrates a pi-style filter (C-R-C) for each
of the 6 channels. Each high quality filter provides
greater than 30dB attenuation in the 800-2700 MHz
range relative to the pass band attenuation. These pi-
style filters also support bidirectional filtering, control-
ling EMI both to and from a data port connector.
In addition, the CM1400-03 provides a very high level
of protection for sensitive electronic components that
may be subjected to electrostatic discharge (ESD).
The input pins are designed and characterized to
safely dissipate ESD strikes of ±15kV, exceeding the
maximum requirement of the IEC 61000-4-2 interna-
tional standard. Using the MIL-STD-883 (Method 3015)
specification for Human Body Model (HBM) ESD, the
device provides protection for contact discharges to
greater than ±30kV.
The CM1400-03 is particularly well suited for portable
electronics (e.g., cellular telephones, PDAs, notebook
computers) because of its small package footprint and
low weight.
The CM1400-03 incorporates OptiGuard™ coating
which results in improved reliability at assembly. The
CM1400-03 is available in a space-saving, low-profile
chip scale package with optional lead-free finishing.
Electrical Schematic
FILTERn*
100Ω
30pF
30pF
FILTERn*
GND
(Pins B1-B3)
1 of 6 EMI/RFI + ESD Channels
* See Package/Pinout Diagram for expanded pin information.
© 2005 California Micro Devices Corp. All rights reserved.
10/04/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com
1
1 page Performance Information (cont’d)
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
CM1400-03www.DataSheet4U.com
Figure 3. Insertion Loss vs. Frequency (A3-C3 to GND B2)
Figure 4. Insertion Loss vs. Frequency (A4-C4 to GND B2)
© 2005 California Micro Devices Corp. All rights reserved.
10/04/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.calmicro.com
5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet CM1400-03.PDF ] |
Número de pieza | Descripción | Fabricantes |
CM1400-03 | 6 Channel EMI Filter Array with ESD Protection | California Micro Devices |
CM1400-03 | 6 Channel EMI Filter Array | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |