|
|
Número de pieza | HMC292LC3B | |
Descripción | GaAs MMIC FUNDAMENTAL MIXER - 16 - 30 GHz | |
Fabricantes | Hittite Microwave | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC292LC3B (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v00.0405
Typical Applications
The HMC292LC3B is ideal for:
• Point-to-Point Radios
7 • Point-to-Mulit-Point Radios & VSAT
• Test Equipment & Sensors
• Military End-Use
Functional Diagram
HMC292LC3B
www.DataSheet4U.com
GaAs MMIC FUNDAMENTAL
MIXER, 16 - 30 GHz
Features
Passive: No DC Bias Required
Input IP3: +20 dBm
LO/RF Isolation: 40 dB
Wide IF Bandwidth: DC - 8 GHz
RoHS Compliant 3x3 mm SMT Package
General Description
The HMC292LC3B is a general pupose passive
double balanced mixer in a leadless RoHS-Compliant
SMT package that can be used as an upconverter
or downconverter between 16 and 30 GHz. This
mixer requires no external components or matching
circuitry. The HMC292LC3B provides excellent LO
to RF and LO to IF suppression due to optimized
balun structures. The mixer operates with LO drive
levels above +9 dBm. The HMC292LC3B eliminates
the need for wire bonding, allowing use of surface
mount manufacturing techniques.
Electrical Specifications, TA = +25° C, IF= 1 GHz, LO= +13 dBm*
Parameter
Min. Typ. Max. Min.
Frequency Range, RF & LO
16 - 26
Frequency Range, IF
DC - 8
Conversion Loss
8 11
Noise Figure (SSB)
8 11
LO to RF Isolation
34 40
LO to IF Isolation
24 32
RF to IF Isolation
14 25
IP3 (Input)
18
IP2 (Input)
48
1 dB Gain Compression (Input)
13
*Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz.
32
28
24
Typ.
26 - 30
DC - 8
9.5
9.5
40
34
30
21
50
14
Max.
12.5
12.5
Units
GHz
GHz
dB
dB
dB
dB
dB
dBm
dBm
dBm
7 - 150
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page v00.0405
HMC292LC3B
www.DataSheet4U.com
GaAs MMIC FUNDAMENTAL
MIXER, 16 - 30 GHz
7
Pin Descriptions
Pin Number
Function
1, 3, 4, 6, 7, 9
GND
Description
Package bottom must also be connected to RF/DC ground.
2
LO
This pin is DC coupled and matched to 50 Ohm
from 16 to 30 GHz.
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
5
IF
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to
DC, this pin must not source or sink more than 2 mA of cur-
rent or part non-function and possible part failure will result.
8
RF
This pin is DC coupled and matched to 50 Ohm
from 16 to 30 GHz.
Interface Schematic
10, 11, 12
N/C
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
7 - 154
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC292LC3B.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC292LC3B | GaAs MMIC FUNDAMENTAL MIXER - 16 - 30 GHz | Hittite Microwave |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |