|
|
Número de pieza | KXR94-2050 | |
Descripción | Tri-Axis Accelerometer | |
Fabricantes | Kionix | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de KXR94-2050 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! www.DataSheet4U.com
± 2g Tri-Axis Accelerometer
Specifications
PART NUMBER:
KXR94-2050
Rev. -
Aug 07
36 Thornwood Drive
Ithaca, New York 14850
Tel: 607-257-1080
Fax: 607-257-1146
www.kionix.com
ECN #
PCN # REV
-
PG #
APPROVED BY
PROD. MGR.
CUST. MGR.
TEST MGR.
VP ENG.
S. Miller
K. Foust
J. Chong
T. Davis
REVISION DESCRIPTION
Initial Release
DATE
8/6/07
DATE
8/6/07
8/6/07
8/6/07
8/6/07
REV'D BY
"Kionix" is a registered trademark of Kionix, Inc. Products described herein are protected by patents issued or pending. No license is granted by implication or
otherwise under any patent or other rights of Kionix. The information contained herein is believed to be accurate and reliable but is not guaranteed. Kionix does
not assume responsibility for its use or distribution. Kionix also reserves the right to change product specifications or discontinue this product at any time without
prior notice. This publication supersedes and replaces all information previously supplied.
© 2007 Kionix, Inc. – All rights reserved
Page 1 of 10
1 page www.DataSheet4U.com
± 2g Tri-Axis Accelerometer
Specifications
Application Schematic
PART NUMBER:
KXR94-2050
Rev. -
Aug 07
X
Aux In
Vmux
S0
S1
C2
1
2
3
4
5
6
7
KXR94
14 Z
13 Y
12
11
C3 C4
10 ST
9 Enable
8
Vdd
C1
Table 4. KXR94 Pad Descriptions
Pad
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Name
NC
X output
GND
Aux In
Vmux
S0
S1
Vdd
Enable
ST
NC
GND
Y Output
Z Output
Center pad
Description
Not Connected Internally (can be connected to Vdd or Gnd)
Analog output of the x-channel. Optionally, a capacitor (C2) placed between this pin and ground will form a low pass filter.
Ground
Auxiliary input for multiplexer. Connect to Vdd or Ground if not used.
Multiplexed analog output. Do not connect if multiplexer is not used.
MUX selector 0 (See Output Select Table). Connect to Vdd or Ground if not used.
MUX selector 1 (See Output Select Table). Connect to Vdd or Ground if not used.
The power supply input. Decouple this pin to ground with a 0.1uF ceramic capacitor (C1).
Enable: High - Normal operation; Low - Device is in standby, power down mode
Self Test: Low – Normal operation; High – Device is in self-test mode
Not Connected Internally (can be connected to Vdd or Gnd)
Ground
Analog output of y-channel. Optionally, a capacitor (C3)placed between this pin and ground will form a low pass filter.
Analog output of z-channel. Optionally, a capacitor (C4) placed between this pin and ground will form a low pass filter.
Ground
Page 5 of 10
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet KXR94-2050.PDF ] |
Número de pieza | Descripción | Fabricantes |
KXR94-2050 | Tri-Axis Accelerometer | Kionix |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |