Datasheet.kr   

NB4N1158 데이터시트 PDF




ON Semiconductor에서 제조한 전자 부품 NB4N1158은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 NB4N1158 자료 제공

부품번호 NB4N1158 기능
기능 Link Replicator
제조업체 ON Semiconductor
로고 ON Semiconductor 로고


NB4N1158 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 8 페이지수

미리보기를 사용할 수 없습니다

NB4N1158 데이터시트, 핀배열, 회로
NB4N1158
Link Replicator for Fibre
Channel, Gigabit Ethernet,
HDTV and SATA
Up to 1.5 Gb/s
Description
The NB4N1158 is a high performance 3.3 V Serial Link Replicator
which provides the function of serial loop replication and serial
loopback control commonly required in Fibre Channel, GbE, HDTV
and SATA applications. Other popular applications include Host Bus
www.DaAtadSahpetoert4sUf.ocromrouting between internal and external connectors, and
hot-pluggable links between redundant switch fabric cards.
IN is sent to both OUT0 and OUT1; each output is enabled by OE0
and OE1 when HIGH. OUT0 can select either IN or IN1 via the
MUX0 pin. Likewise, OUT1 can select between IN or IN0 via the
MUX1 pin. Out can select between IN0 and IN1.
In Link Replicator applications, such as the Line Card to Switch
Card links, IN is transmitted to both OUT0 and OUT1 which either
IN0 or IN1 is selected at OUT. In Host Adapter applications, IN goes
to OUT0 (an internal connector) which returns data on IN0. IN0 is
looped to OUT1 (an external connector) which returns data on IN1 and
then back to the SerDes on OUT.
The NB4N1158 is packaged in a 4.7 mm x 9.7 mm TSSOP-28.
Features
ăReplicates Fibre Channel, Gigabit Ethernet, HDTV, and
Serial ATA (SATA) Links
ăT11 Fibre Channel Complaint at 1.0625 Gb/s
ăDifferential LVPECL Outputs, External Load/Termination
Resistors Required
ăIEEE802.3z Gigabit Ethernet Compliant at 1.25 Gb/s
ăSMPTE-292M Compliant at 1.485 Gb/s
ă330 mW Maximum Power Dissipation
ăOperating Range: VCC = 3.135 V to 3.465 V
ă28-pin, 4.4 mm x 9.7 mm TSSOP Package
ăThese are Pb-Free Devices
http://onsemi.com
28 Lead TSSOP
DT SUFFIX
CASE 948A
MARKING DIAGRAM*
NB4N
1158
ALYW
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G or G = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
NB4N1158
LOOP0
TX
RX
LOOP1
©Ă Semiconductor Components Industries, LLC, 2007
December, 2007 - Rev. 0
Figure 1. Simplified Application
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
1 Publication Order Number:
NB4N1158/D




NB4N1158 pdf, 반도체, 판매, 대치품
NB4N1158
Table 5. DC CHARACTERISTICS VDD = 3.30 V $5%, GND = 0 V; TA = -40°C to +85°C (Note 3)
Symbol
Characteristic
Min
Typ
Max Unit
VDD Power Supply Voltage, 3.30 V $5%
IDD Power Supply Current (Outputs open)
PD Power Dissipation; Outputs Open; VDD = VDDmax
DVIN
Receiver Differential Voltage Amplitude; (IN, IN0, IN1), AC-Coupled,
Internally Biased to 1.2 V; Differential Measurement - (VINn+ - VINn-)
DVOUT50 Output Differential Voltage Swing, peak-peak; (OUT, OUT0, OUT1)
Outputs loaded / terminated with 50 W to VDD – 2.0 V
Differential Measurement - (VOUTn+ - VOUTn-)
DVOUT75 Output Differential Voltage Swing, peak-peak; (OUT, OUT0, OUT1)
Outputs loaded / terminated with 75 W to VDD – 2.0 V
Differential Measurement - (VOUTn+ - VOUTn-)
LVCMOS/LVTTL INPUTS
3.14
300
1000
1200
57
1600
1650
3.47
75
330
2600
2200
2200
V
mA
mW
mV
mV
mV
VIH Input HIGH Voltage, TTL
www.DataSheet4U.com
VIL Input LOW Voltage, TTL
IIH Input HIGH Current, TTL; VIN = 2.4 V
IIL Input LOW Current, TTL; VIN = 0.5 V
2.0
0
-100
VDD + 0.5
0.8
100
V
V
mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. LVPECL outputs loaded with external 50 W termination resistors to VTT = VDD - 2.0 V for proper operation (see Figure 6).
Table 6. AC CHARACTERISTICS VDD = 3.3 V $5%, GND = 0 V -40°C to +85°C
Symbol
Characteristic
Min
fIN / OUT
tr/tf
Input / Output Frequency Range
Output rise and Fall Times (Note 4)
1.0
tPD Propagation Delay, IN to OUT
TDJ Deterministic Jitter Added to Serial Input Up to 1.5 Gb/s;
K28.5$ Pattern
Typ
110
0.375
Max Unit
1.5 Gb/s
150 ps
4.0 ns
40 ps pk-pk
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
4. Measured 20% to 80%
IN+/-
IN0+/-
IN1+/-
OUT+/-
OUT0+/-
OUT1+/-
tpd
tpd tJ
Figure 4. Timing Waveforms
http://onsemi.com
4

4페이지










NB4N1158 전자부품, 판매, 대치품
NB4N1158
PACKAGE DIMENSIONS
e
28
PIN ONE
ÇÇÇÇÇÇÇÇÇÇLOCATION
2X
0.20 C B A 1
www.DataSheet40U.0.5com
0.10 C
D
SEATING
PLANE
C
28X b
0.10 C B A
c ÇÇÉÉÇÇÉÉ(b)ÇÇÉÉ c1
b1
SECTION A-A
28 LEAD TSSOP
DT SUFFIX
CASE 948AA-01
ISSUE O
15 B
E1 E
DETAIL A
14
AA
A2
A
A
A1
02
H
GAUGE PLANE
0.25
03
S
R1
R
L
(L1)
01
DETAIL A
NOTES:
1. DIMENSIONS AND TOLERANCING PER
ASME Y14.5M, 1994.
2. DIMENSIONS IN MILLIMETERS.
3. DIMENSION b DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE
0.08 MM TOTAL IN EXCESS OF THE “b”
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
4. DATUMS A AND B TO BE DETERMINED
AT DATUM PLANE H.
MILLIMETERS
DIM MIN MAX
A --- 1.20
A1 0.05 0.15
A2 0.80 1.05
b 0.19 0.30
b1 0.19 0.25
c 0.09 0.20
c1 0.09 0.16
D 9.60 9.80
E 6.40 BSC
E1 4.30 4.50
e 0.65 BSC
L 0.45 0.75
L1 1.00 REF
R 0.09 ---
R1 0.09 ---
S 0.20 ---
01 0 _ 8 _
02 12 _REF
03 12 _REF
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
 Literature Distribution Center for ON Semiconductor
 P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
N. American Technical Support: 800-282-9855 Toll Free
 USA/Canada
Europe, Middle East and Africa Technical Support:
 Phone: 421 33 790 2910
Japan Customer Focus Center
 Phone: 81-3-5773-3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
7
NB4N1158/D

7페이지


구       성 총 8 페이지수
다운로드[ NB4N1158.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
NB4N1158

Link Replicator

ON Semiconductor
ON Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵