|
|
|
부품번호 | ADP1650 기능 |
|
|
기능 | 1.5 A LED Flash Driver | ||
제조업체 | Analog Devices | ||
로고 | |||
전체 2 페이지수
1.5 A LED Flash Driver withwww.DataSheet4U.com
I2C-Compatible Interface
ADP1650
FEATURES
Ultracompact solution
Small, 2 mm × 1.5 mm, 12-ball WLCSP package
Smallest footprint, 1 mm height, 1 μH power inductor
LED current source for local LED grounding
Simplified routing to/from LED
Improved LED thermals
Synchronous 3 MHz PWM boost converter, no external diode
High efficiency: 90% peak
Reduces high levels of input battery current during flash
Limits battery current drain in torch mode
I2C programmable
Currents up to 1500 mA in flash mode for one LED with
7% accuracy over all conditions
Currents up to 200 mA in torch mode
Programmable dc battery current limit (4 settings)
Programmable flash timer up to 1600 ms
Low VBAT mode to reduce LED current automatically
4-bit ADC for LED VF, die/LED temperature readback
Control
I2C-compatible control registers
External STROBE and torch input pins
2 transmitter mask (TxMASK) inputs
Safety
Thermal overload protection
Inductor fault detection
LED short-/open-circuit protection
APPLICATIONS
Camera-enabled cellular phones and smart phones
Digital still cameras, camcorders, and PDAs
FUNCTIONAL BLOCK DIAGRAM
INPUT VOLTAGE = 2.7V TO 5.0V
1.0µH
10µF
TX1/TORCH
TX2/ILED/ADC
GPIO1
GPIO2
VIN SW
VOUT
ADP1650
STROBE
LED_OUT
SCL
SDA
EN
SGND
PGND
10µF
MAX 1.5A
Figure 1.
Li-ION +
L1
INDUCTOR
AREA = 16.4mm2
C1
PGND
C2
Li-ION +
DIGITAL
INPUT/
OUTPUT
LED
ANODE
Figure 2. PCB Layout
GENERAL DESCRIPTION
The ADP1650 is a very compact, highly efficient, single white
LED flash driver for high resolution camera phones that
improves picture and video quality in low light environments.
The device integrates a programmable 1.5 MHz or 3.0 MHz
synchronous inductive boost converter, an I2C-compatible
interface, and a 1500 mA current source. The high switching
frequency enables the use of a tiny, 1 mm high, low cost, 1 µH
power inductor, and the current source permits LED cathode
grounding for thermally enhanced, low EMI, and compact layouts.
The LED driver maximizes efficiency over the entire battery
voltage range to maximize the input-power-to-LED-power
conversion and minimize battery current draw during flash
events. A programmable dc battery current limit safely maximizes
LED current for all LED VF and battery voltage conditions.
Two independent TxMASK inputs permit the flash LED current
and battery current to reduce quickly during a power amplifier
current burst. The I2C-compatible interface enables the pro-
grammability of timers, currents, and status bit readback for
operation monitoring and safety control.
The ADP1650 comes in a compact 12-ball, 0.5 mm pitch
package and operates within specification over the full −40°C to
+125°C junction temperature range.
For more information about the ADP1650, contact Analog Devices, Inc., Sales Office, at http://www.analog.com/sales.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ ADP1650.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
ADP165 | Very Low Quiescent Current LDO Regulator | Analog Devices |
ADP1650 | 1.5 A LED Flash Driver | Analog Devices |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |