|
|
PDF LY320 Data sheet ( Hoja de datos )
| Número de pieza | LY320 | |
| Descripción | YELLOW LAMP LED | |
| Fabricantes | Seoul Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LY320 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Specification
LY320
SSC
Drawn
Approval
Customer
Approval
<080924> Rev. 0.2
Rev. 00
December 2007
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
1 page  
www.DataSheet4U.com
4. Reliability Tests
Item
Condition
Note Failures
Life Test
High Temperature Operating
Low Temperature Operating
Thermal Shock
Resistance to soldering Heat
ESD
(Human Body Model)
High Temperature Storage
Low Temperature Storage
Temperature Humidity
Storage
Temperature Humidity
Operating
Ta = RT, IF = 30mA
Ta = 100ºC, IF = 10mA
Ta = -40ºC, IF = 20mA
Ta = -50ºC (30min) ~ 105º (30min)
(Transfer time : 10sec, 1Cycle = 1hr)
Ts = 255 ± 5ºC, t = 10sec
1kV, 1.5kΩ ; 100pF
Ta = 105ºC
Ta = -50ºC
Ta = 85ºC, RH = 85%
Ta = 85ºC, RH = 85%, IF = 15mA
1000hrs
1000hrs
1000hrs
100
cycles
1 time
1 time
1000hrs
1000hrs
1000hrs
100hrs
0/22
0/22
0/22
0/40
0/22
0/22
0/22
0/22
0/22
0/22
< Judging Criteria For Reliability Tests >
VF USL[1] X 1.2
IR USL X 2.0
ФV LSL [2] X 0.7
Notes :
[1] USL : Upper Standard Level
[2] LSL : Lower Standard Level.
<080924> Rev. 0.2
Rev. 00
December 2007
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
5 Page 
www.DataSheet4U.com
10. Precaution for Use
1) Storage
• Before opening the package
Avoid the absorption of moisture, we recommended to store Lamp LEDs in a dry
box(or desiccators) with a desiccant . Otherwise, store them in the following environment:
Temperature : 5℃~30℃ Humidity : 50% max.
• After opening the package
a. Soldering should be done right after opening the package(within 24Hrs).
b. Keeping of a fraction
- Sealing
- Temperature : 5 ~ 40℃, Humidity : less than 30%
c. If the package has been opened more than 1week or the color of desiccant changes,
Components should be dried for 10-12hr at 60±5℃
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temp. after soldering.
• Avoid quick cooling
• Leadframes are silver plated SPCC. The silver plate surface may be affected by
environments which contains corrosive substances. Please avoid conditions which may cause
the LEDs to corrode, tarnish or discolor.
2) Lead Forming
• When the lead forming is required before soldering , care must be taken to avoid any bending
and mechanical stress. The stress to the base may damage the LEDs.
• When mounting the LEDs onto a PCB, the holes on the circuit board should be exactly
aligned with the leads of the LEDs.
• It is recommended that tooling made to precisely form and cut the leads to length rather than
rely on hand operating.
<080924> Rev. 0.2
Rev. 00
December 2007
www.ZLED.com
Document No. : SSC-QP-7-07-24 (Rev.00)
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet LY320.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LY320 | YELLOW LAMP LED | Seoul Semiconductor |
| LY3200ALH | MEMS motion sensor:high performance +-2000 dps analog yaw-rate gyroscope |  STMicroelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |