Datasheet.kr   

TJ120F06J3 데이터시트 PDF




Toshiba Semiconductor에서 제조한 전자 부품 TJ120F06J3은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 TJ120F06J3 자료 제공

부품번호 TJ120F06J3 기능
기능 DC-DC Converter Applications Motor Drive Applications
제조업체 Toshiba Semiconductor
로고 Toshiba Semiconductor 로고


TJ120F06J3 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 7 페이지수

미리보기를 사용할 수 없습니다

TJ120F06J3 데이터시트, 핀배열, 회로
TwJww1.D2a0taSFhe0et46UJ.co3m
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOS)
TJ120F06J3
Chopper Regulator, DC-DC Converter Applications
Motor Drive Applications
Low drain-source ON resistance: RDS (ON) = 5.5 mΩ (typ.)
High forward transfer admittance: |Yfs| = 110 S (typ.)
Low leakage current: IDSS = 10 μA (max) (VDS = 60 V)
Enhancement-model: Vth = 1.5 to 3.0 V (VDS = 10 V, ID = 1 mA)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Drain-source voltage
Drain-gate voltage (RGS = 20 kΩ)
Gate-source voltage
Drain current
DC (Note 1)
Pulse (Note 1)
Drain power dissipation (Tc = 25°C)
Single pulse avalanche energy
(Note 2)
Avalanche current
Repetitive avalanche energy (Note 3)
Channel temperature (Note 4)
Storage temperature range (Note 4)
Symbol
VDSS
VDGR
VGSS
ID
IDP
PD
EAS
IAR
EAR
Tch
Tstg
Rating
60
60
±20
120
360
300
608
120
30
175
55 to 175
Unit
V
V
V
A
W
mJ
A
mJ
°C
°C
10.0 ± 0.3
9.5 ± 0.2
Unit: mm
0.4 ± 0.1
1.1
0.76 ± 0.1
1.4 ± 0.1
2.54 ± 0.25
2.35 ± 0.1
2.34 ± 0.25
123
0.4 ± 0.1
1. GATE
2. DRAIN
HEAT SINK
3. SOURSE
8.0
JEDEC
JEITA
TOSHIBA
2-10W1A
Weight: 1.07 g (typ.)
2
Thermal Characteristics
1
Characteristics
Thermal resistance, channel to case
Symbol
Rth (ch-c)
Max
0.5
Unit
°C/W
3
Note 1: Please use devises on condition that the channel temperature is below 175°C.
Note 2: VDD = −25 V, Tch = 25°C (Initial), L = 57 μH, RG = 25 Ω, IAR = −120 A
Note 3: Repetitive rating; pulse width limited by maximum channel temperature.
Note 4: The definitions of the absolute maximum channel temperature and storage temperatures are based on
AEC-Q101.
Note 5:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
This transistor is an electrostatic sensitive device. Please handle with caution
1 2009-04-17




TJ120F06J3 pdf, 반도체, 판매, 대치품
ID – VDS
200
Common source
Tc = 25°C
Pulse Test
160
8
10
6
15
120
80
5
4.5
4
VGS = −3.5 V
40
0
0
0.4
0.8
1.2
1.6
2
Drain-source voltage VDS (V)
TwJww1.D2a0taSFhe0et46UJ.co3m
250
200
150
8
10
15
100
ID – VDS
6 5 Common source
Tc = 25°C
Pulse Test
4.5
4
50 VGS = −3.5 V
0
0 1 2 3 4 5
Drain-source voltage VDS (V)
240
Common source
VDS = −10 V
Pulse Test
180
ID – VGS
120
60
0
0
100
25
Tc = −55°C
1 2 3 4
Gate-source voltage VGS
5
(V)
6
2
1.6
1.2
0.8
0.4
0
0
VDS – VGS
Common source
Tc = 25°C
Pulse Test
ID = −120 A
60
30
4 8 12
Gate-source voltage VGS
16
(V)
20
1000 Common source
VDS = −10 V
Pulse Test
|Yfs| – ID
100
Tc = −55°C
100
25
10
1
-1
-10
-100
-1000
Drain current ID (A)
RDS (ON) – ID
100
Common source
Tc = 25°C
Pulse Test
10
VGS = −10 V
1
-1
-10
-100
-1000
Drain current ID (A)
4 2009-04-17

4페이지










TJ120F06J3 전자부품, 판매, 대치품
RESTRICTIONS ON PRODUCT USE
TwJww1.D2a0taSFhe0et46UJ.co3m
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
7 2009-04-17

7페이지


구       성 총 7 페이지수
다운로드[ TJ120F06J3.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
TJ120F06J3

DC-DC Converter Applications Motor Drive Applications

Toshiba Semiconductor
Toshiba Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵