|
|
|
부품번호 | RF071L4S 기능 |
|
|
기능 | Super Fast Recovery Diode | ||
제조업체 | ROHM Semiconductor | ||
로고 | |||
전체 4 페이지수
www.DataSheet4U.com
Super Fast Recovery Diode
RF071L4S
Series
Standard Fast Recovery
Dimensions(Unit : mm)
Applications
General rectification
Features
1)Small power mold type.(PMDS)
2)high switching speed
3)Low forward voltage
Land size figure(Unit : mm)
2.0
PMDS
Structure
Construction
Taping dimensions(Unit : mm)
Silicon epitaxial planer
2.0±0.05
4.0±0.1
φ1.55±0.05
0.3
2.9±0.1
4.0±0.1
φ1.55
2.8MAX
Absolute maximum ratings (Tl=25C)
Parameter
Symbol
Repetitive peak reverse voltage
Reverse voltage
VRM
VR
Average rectified forward current
Io
Forward current surge peak
IFSM
Junction temperature
Storage temperature
Tj
Tstg
Conditions
Limits
D0.5
400
Direct voltage
400
Glass epoxy substrate mounted Tl=120C
1
60Hz half sin wave, Non-repetitive
one cycle peak value, Tj=25C
15
150
-55to+150
Unit
V
V
A
A
C
C
Electrical characteristics(Tj=25C)
Parameter
Symbol
Forward voltage
VF
Reverse current
Reverse recovery time
Thermal resistance
IR
trr
Rth(j-l)
Conditions
IF=0.7A
VR=400V
IF=0.5A,IR=1A,Irr=0.25×IR
junction to lead
Min. Typ.
-1
- 0.01
- 20
--
Max.
1.25
10
25
23
Unit
V
μA
ns
C/W
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
1/3
2010.02 - Rev.A
Notice
www.DataSheet4U.com
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A
4페이지 | |||
구 성 | 총 4 페이지수 | ||
다운로드 | [ RF071L4S.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
RF071L4S | Super Fast Recovery Diode | ROHM Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |