Datasheet.kr   

E5ZN 데이터시트 PDF




Omron에서 제조한 전자 부품 E5ZN은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 E5ZN 자료 제공

부품번호 E5ZN 기능
기능 Modular Temperature Controller
제조업체 Omron
로고 Omron 로고


E5ZN 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 13 페이지수

미리보기를 사용할 수 없습니다

E5ZN 데이터시트, 핀배열, 회로
Modular Temperature Controller
E5ZN
www.DataSheet4U.com
CSM_E5ZN_DS_E_3_1
New DIN Track Mounting Temperature
Controller
• Two channels of temperature control available despite width of
only 22.5 mm.
• The Temperature Controller itself can be replaced without
changing terminal wiring.
• Use in combination with a compact Setting Display Unit to
reduce communications programming requirements.
• Front-panel LED indicators for easy operation monitoring.
• Power supply and communications wiring not required between
Units when mounted side-by-side.
• CompoWay/F communications protocol supported.
• UL, CSA, and CE Marking compliance.
Refer to Safety Precautions on page 11 to 12 and Safety
Precautions for All Temperature Controllers.
Model Number Structure
Model Number Legend
E5ZN-@@@@@@-@
1 2 3456 7
1. Control points
2: Two points
2. Control output
Q: Voltage (for driving SSR)
T: Transistor
C: Current
3. Auxiliary output
P: Two sourcing transistor outputs
N: Two sinking transistor outputs
4. Option
H: Heater burnout alarm
F: Transfer output (See note 1.)
5. Communications
03: RS-485
6. Input type
TC: Thermocouple
P: Platinum resistance thermometer
7. CompoWay/F serial communications
FLK: CompoWay/F serial communications
Note: 1. Transfer output can be specified only when the control output is a current output.
2. The above model number legend is intended as a functional description of models. Not all possible combinations of functions are
available. Confirm model availability in Ordering Information on page 2 when ordering.
Example: Voltage output, two sinking transistor outputs, heater burnout alarm, thermocouple: E5ZN-2TNH03TC-FLK
Note: Be sure to read the precautions for correct use and other precautions in the following user's manual before using the Digital
Controller.
E5ZN Modular Temperature Controller User’s Manual (Cat. No. H113)
1




E5ZN pdf, 반도체, 판매, 대치품
Characteristics
E5ZN
www.DataSheet4U.com
Indication
accuracy
Influence of temperature
Influence of voltage
Transfer output
Hysteresis
Proportional band (P)
Integral time (I)
Derivative time (D)
Control period
Manual reset value
Alarm setting range
Sampling period
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Weight
Degree of protection
Memory protection
Approved standards
(See note 4.)
Thermocouple: (Indicated value ±0.5% or ±1°C, whichever is greater) ±1 digit max. (See note 1.)
Platinum resistance thermometer: (Indicated value ±0.5% or ±1°C, whichever is greater) ±1 digit max. (See note
1.)
Analog input: ±0.5% or ±1 digit max.
CT input: ±5% FS ±1 digit max.
Thermocouple input (R, S, B): (±1% of PV or ±10°C, whichever is greater) ±1 digit max.
Other thermocouple input: ( ±1% of PV or ±4°C, whichever is greater) ±1 digit max.
*K thermocouple at 100°C max.: ±10°C max.
Platinum resistance thermometer: (±1% of PV or ±2°C, whichever is greater) ±1 digit max.
Analog input: (±1%FS) ±1 digit max.
Accuracy: ±0.5% FS (See note 2.)
0.1 to 999.9 EU (in units of 0.1 EU)
(See note 3.)
0.1 to 999.9 EU (in units of 0.1 EU)
(See note 3.)
0 to 3,999 s (in units of 1 s)
0 to 3,999 s (in units of 1 s)
1 to 99 s (in units of 1 s)
0.0 to 100.0% (in units of 0.1%)
1,999 to 9,999 (Position of decimal point depends on input type.)
500 ms
20 Mmin. (at 500 VDC)
600 VAC for 1 minute at 50 or 60 Hz (between unlike terminals of charged parts)
10 to 55 Hz, 10 m/s2 for 2 h each in X, Y, and Z directions
150 m/s2 max., 3 times each in ±X, ±Y, and ±Z directions
Temperature Controller: Approx. 90 g
Terminal Unit (18): Approx. 80 g
Terminal Unit (24): Approx. 100 g
Temperature Controller: IP00
Terminal Unit: IP00
EEPROM (non-volatile memory) (Number of write operations: 100,000)
UL File No.:
E200593
CSA File No.:
203889-1140084
CE EMS:
ESD
EN61326, EN61000-4-2 (4 kV/contact, 8 kV/air)
REM field
EN61326, EN61000-4-3 (10 V/m)
Fast transient EN61326, EN61000-4-4 (2 kV/DC power, 1 kV/I/O)
Surge immunity EN61326, EN61000-4-5 (line to ground: 2 kV/DC power
1 kV/I/O
line to line:
1 kV/DC power)
Conducted RF EN61326, EN61000-4-6 (10 V)
EMI:
Radiated
EN61326 Class A
Note: 1. The indication accuracy for T and N thermocouples at 100°C, and for U and L thermocouples is ±2°C ±1 digit max. There is no specifi-
cation for the indication accuracy for the B thermocouple used at 400°C max. The indication accuracy for R and S thermocouples at
200°C max. is ±3°C ±1 digit max.
2. The transfer output accuracy for 0 to 4 mA when 0 to 20 mA DC is selected is ±0.5% FS +0.7 mA. The transfer output accuracy for 0 to
1 V when 0 to 5 VDC is selected is ±0.5% FS +0.175 V.
3. “EU” stands for “Engineering Unit.”
4. In order to satisfy the EN61326 Class A standard for conducted emissions, install a noise filter (Densei-Lambda MXB-1206-33 or equiv-
alent) in a DC power line as close to the E5ZN as possible.
4

4페이지










E5ZN 전자부품, 판매, 대치품
Nomenclature
E5ZN-2
E5ZN
www.DataSheet4U.com
Operation Indicators
POWER
Lights when power is turned ON.
ERROR
Lights when a fatal error (e.g., memory
error or sensor error) occurs.
SD/RD (Communications Operation)
Flashes during communications with the host.
OUT1 (Control Output 1)
Lights when the control output 1 is ON.
OUT2 (Control Output 2)
Lights when the control output 2 is ON.
SUB1 (Auxiliary Output 1)
Lights when the auxiliary output 1 is ON.
SUB2 (Auxiliary Output 2)
Lights when the auxiliary output 2 is ON.
POWER
ERROR
SD/RD
OUT1
OUT2
SUB1
SUB2
Unit Number Setting
Setting range of 0 to F allows up
to 16 Units to be set.
Baud Rate
E5ZN-SDL
The following diagram shows the names and functions of the E5ZN-SDL parts for when it is connected to the E5ZN-2@@@@@@@.
Operation Indicators
• These indicators indicate the terminal
operations for the E5ZN-2@@@@@@@.
• OUT1, OUT2 (Control Output 1, Control
Output 2)
Light when the control output 1 or the control
output 2 functions are ON.
• SUB1, SUB2 (Auxiliary Output 1, Auxiliary
Output 2)
Light when the auxiliary output 1 or the
auxiliary output 2 functions are ON.
• STOP
Lights when operation stops. Lights for an
event or when RUN/STOP is set to STOP
during control. Remains unlit at other times.
• CMW (Communications Write Control)
Lights when communications write is permitted
and remains unlit when it is prohibited.
• Some indicators are not used on the
E5ZN-2@@@@@@@ (SUB3, SUB4).
Unit/Channel Indicator
Indicates the unit number and
the channel number.
Level Key
Press this key to switch setting
levels.
Mode Key
Press this key to switch setting
data within the setting level.
Temperature Unit
Displayed when the display unit for setting
data is temperature. The display is
determined by the setting for temperature unit,
with either “°C” or “°F” displayed accordingly.
UNIT Key
Press to switch the unit number.
Level Key and Mode Key
Press together to switch to protect mode.
No. 1 Display
Displays the PV or the type of
setting data.
No. 2 Display
Displays the target value, the
control variable, or the set value
for setting data (setting contents).
Up Key
Each time this key is pressed, the
value displayed in No. 2
Display increases. If it is held
down, the rate of increase
becomes faster.
It can also be used to move to the
next setting item.
Down Key
Each time this key is pressed, the
value displayed in No. 2
Display decreases. If it is held
down, the rate of decrease
becomes faster.
It can also be used to return to the
previous setting item.
Channel Key
Press this key to change the
channel number.
Copy Key
Press this key to read all the
settings from the Temperature
Controller to the Setting Display
Unit, or to write from the Setting
Display Unit to the Temperature
Controller.
7

7페이지


구       성 총 13 페이지수
다운로드[ E5ZN.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
E5ZN

Modular Temperature Controller

Omron
Omron

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵