W25Q16 Datasheet PDF - Winbond
| Part Number | W25Q16 | |
| Description | (W25Qxx) FLASH MEMORY | |
| Manufacturers | Winbond | |
| Logo |  |
|
|
There is a preview and W25Q16 download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.com
W25Q80, W25Q16, W25Q32
8M-BIT, 16M-BIT AND 32M-BIT
SERIAL FLASH MEMORY WITH
DUAL AND QUAD SPI
Publication Release Date: September 26, 2007
- 1 - Preliminary - Revision B
|
| |
 
www.DataSheet4U.com
W25Q80, W25Q16, W25Q32
1. GENERAL DESCRIPTION
The W25Q80 (8M-bit), W25Q16 (16M-bit), and W25Q32 (32M-bit) Serial Flash memories provide a
storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and
performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM,
executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The devices
operate on a single 2.7V to 3.6V power supply with current consumption as low as 5mA active and
1µA for power-down. All devices are offered in space-saving packages.
The W25Q80/16/32 array is organized into 4,096/8,192/16,384 programmable pages of 256-bytes
each. Up to 256 bytes can be programmed at a time using the Page Program instructions. Pages can
be erased in groups of 16 (sector erase), groups of 128 (32KB block erase), groups of 256 (64KB
block erase) or the entire chip (chip erase). The W25Q80/16/32 has 256/512/1024 erasable sectors
and 16/32/64 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in
applications that require data and parameter storage. (See figure 2.)
The W25Q80/16/32 supports the standard Serial Peripheral Interface (SPI), and a high performance
Dual/Quad output as well as Dual/Quad I/O SPI using SPI pins: Serial Clock, Chip Select, Serial Data
I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 80MHz are
supported allowing equivalent clock rates of 160MHz for Dual Output and 320MHz for Quad Output
when using the Fast Read Dual/Quad Output instructions. These transfer rates are comparable to
those of 8 and 16-bit Parallel Flash memories.
A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control,
provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and
device identification with a 64-bit Unique Serial Number.
2. FEATURES
• Family of SpiFlash Memories
– W25Q80: 8M-bit / 1M -byte (1,048,576)
– W25Q16: 16M-bit / 2M-byte (2,097,152)
– W25Q32: 32M-bit / 4M-byte (4,194,304)
– 256-bytes per programmable page
• Standard, Dual or Quad SPI
– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
• Highest Performance Serial Flash
– Up to 6X that of ordinary Serial Flash
– 80MHz clock operation
– 160MHz equivalent Dual SPI
– 320MHz equivalent Quad SPI
– 40MB/S continuous data transfer rate
– 30MB/S random access (32-byte fetch)
– Comparable to X16 Parallel Flash
• Low Power, Wide Temperature Range
– Single 2.7 to 3.6V supply
– 4mA active current, <1µA Power-down (typ.)
– -40°C to +85°C operating range
• Flexible Architecture with 4KB sectors
– Uniform Sector Erase (4K-bytes)
– Block Erase (32K and 64K-bytes)
– Program one to 256 bytes
– Up to 100,000 erase/write cycles
– 20-year data retention
• Advanced Security Features
– Software and Hardware Write-Protect
– Top or Bottom, Sector or Block selection
– Lock-Down and OTP protection(1)
– 64-Bit Unique ID for each device(1)
Note 1:
These features are on special order.
Please contact Winbond for details.
• Space Efficient Packaging
– 8-pin SOIC 208-mil
– 8-pad WSON 6x5-mm (W25Q80 & W25Q16)
–16-pin SOIC 300-mil (W25Q16 & W25Q32)
Publication Release Date: September 26, 2007
- 5 - Preliminary - Revision B
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for W25Q16 electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ W25Q16.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| W25Q128BV | The function is 3V 128M-BIT SERIAL FLASH MEMORY. Winbond | |
| W25Q128FV | The function is 3V 128M-BIT SERIAL FLASH MEMORY. Winbond | |
| W25Q16 | The function is (W25Qxx) FLASH MEMORY. Winbond | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
W25Q
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||