|
|
Número de pieza | D1U4CS-W-2200-12-HXXC | |
Descripción | AC/DC Front End Power Supply | |
Fabricantes | Murata Manufacturing | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de D1U4CS-W-2200-12-HXXC (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! DataSheet.in
D1U4CS-W-2200-12-HxxC Series
AC/DC Front End Power Supply
PRODUCT OVERVIEW
The D1U4CS-W-2200-12-HxxC is a 2200 Watt, power-factor-corrected (PFC) front-end power supply for hot-
swapping redundant systems. The main output is 12V with standby output of 5V or 3.3V. Packaged in 1U low profile,
it is designed to deliver reliable bulk power to servers, workstations, storage systems or any 12V distributed power
architecture systems requiring high power density. The highly efficient electrical and thermal design with internal
cooling fans supports reliable operation conditions. The D1U4CS-W-2200-12-HxxC is designed to auto-recover from
overtemperature fault. Status information is provided with front panel LEDs, logic signals and I2C management inter-
face. Four units can be packaged into an optional 19” 1U power shelf to provide up to 8.8kW of power.
FEATURES
2200W (220Vac), 1100W (110Vac)
Output Power
Certified to Climate Savers Computing
InitiativeSM and 80 PLUS® Gold efficiency
12V Main Output, 3.3V or 5V Standby Output
1U sized; dimensions 14.0” x 4.0” x 1.6”
24.5 Watts per cubic inch density
N+1 redundancy capable,
including hot-docking
Active Current Sharing on main output
Over-voltage, Over-current,
Over-temperature protection
Internal cooling fans (variable speed)
I²C Bus Interface, PSMI compliant
RoHS compliant
Optional 1U x 19” Power-Shelf
SELECTION GUIDE
Model Number
D1U4CS-W-2200-12-HC4C
D1U4CS-W-2200-12-HC3C
D1U4CS-W-2200-12-HA4C
D1U4CS-W-2200-12-HA3C
Power Output
High Line AC
2200W
2200W
2200W
2200W
Power Output
Low Line AC
1100W
1100W
1100W
1100W
Main
Output
12.12V
12.12V
12.12V
12.12V
Standby
Output
3.3V
3.3V
5V
5V
Airflow
Back to front
Front to back
Back to front
Front to back
INPUT CHARACTERISTICS
Parameter
Input Voltage Operating Range
Input Frequency
Turn-on Input Voltage
Turn-off Input Voltage
Maximum Input Current
Inrush Current
Power Factor
Conditions
Min. Typ.
Low Line AC
90
High Line AC
180
47 60
Ramp up
81
Ramp down
70.5
Low Line AC 90Vac
High Line AC 180Vac
Cold start between 0-1msec
Output load >90%
0.95
Output load >50%
0.95
Max. Units
140
Vac
264
63 Hz
89
Vac
78
13
Arms
13
16.5 Apk
OUTPUT VOLTAGE CHARACTERISTICS
Output
Voltage
Parameter
Conditions
Voltage Set Point Accuracy
Line and Load Regulation
12V Ripple Voltage & Noise
20MHz Bandwidth
Output Current
Load Capacitance
Voltage Set Point Accuracy
Line and Load Regulation 20MHz Bandwidth
5Vsb Ripple Voltage & Noise
Operating Range
Load Capacitance
Voltage Set Point Accuracy
Line and Load Regulation 20MHz Bandwidth
3.3Vsb Ripple Voltage & Noise
Operating Range
Load Capacitance
Min.
11.76
0
4.85
0
3.2
0
Typ.
12.12
5
3.3
Max.
12.48
120
180
30000
5.15
50
5
10000
3.4
50
6
10000
Units
Vdc
mV p-p
A
μF
Vdc
mV p-p
A
μF
Vdc
mV p-p
A
μF
1 Ripple and noise are measured with 0.1 uF of ceramic capacitance and 10 uF of tantalum capacitance on each of the power supply outputs. The output
noise requirements apply over a 0 Hz to 20 MHz bandwidth. A short coaxial cable with 50ohm scope termination is used.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
email: [email protected]
17 Aug 2010 CPS_D1U4CS-2200-12-HxxC.A04 Page 1 of 5
1 page DataSheet.in
D1U4CS-W-2200-12-HxxC Series
AC/DC Front End Power Supply
MECHANICAL DIMENSIONS - D1U4CS-W-2200-12-HxxC
Airflow Front to Back
Airflow Back to Front
12.63 ±0.40
0.497 ±0.016
349.60 ±0.40
13.764 ±0.016
8.89 ±0.25
0.350 ±0.010
AC Input Connector: The AC input connector is standard IEC C20 20A.
355.60 ±0.65
14.000 ±0.026
Dimensions: 13.76”L x 4.00” W x 1.61” H
OPTIONAL ACCESSORIES
Description
12V D1U4CS output connector card
APPLICATION NOTES
Document Number
ACAN-32
ACAN-33
Part Number
D1U4CS-12-CONC
Description
Output Connector Card for D1U4CS
D1U4CS Communication Protocol
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/locations
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2010 Murata Power Solutions, Inc.
email: [email protected]
17 Aug 2010 CPS_D1U4CS-2200-12-HxxC.A04 Page 5 of 5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet D1U4CS-W-2200-12-HXXC.PDF ] |
Número de pieza | Descripción | Fabricantes |
D1U4CS-W-2200-12-HXXC | AC/DC Front End Power Supply | Murata Manufacturing |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |