Datasheet.kr   

SM05B-PASS-* 데이터시트 PDF




JST에서 제조한 전자 부품 SM05B-PASS-*은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 SM05B-PASS-* 자료 제공

부품번호 SM05B-PASS-* 기능
기능 CONNECTOR
제조업체 JST
로고 JST 로고


SM05B-PASS-* 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 15 페이지수

미리보기를 사용할 수 없습니다

SM05B-PASS-* 데이터시트, 핀배열, 회로
2.0mm
(.079") pitch
PA FAMILY SERIES/PA•PAF•PAL CONNECTOR
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
Features ––––––––––––––––––––––––
• Secure locking device
The housing has a locking device to prevent accidental
disconnection because of routing of wires or of vibration, and
also reverse and different circuit numbers mating.
• Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-to-
wire mating halves.
• Secondary retainers
Secondary retainers enhance safety in case of partial insertion
or accidental release of the contact.
• Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
Based upon wire-to-board crimp style PA
connectors, the PA series family of
connector have been expanded to meet the
requirement of complex wire harness of
2.0mm (.079") pitch connectors with secure
locking mechanism thanks to the
additional line up of wire-to-board IDC style
PAF connectors and wire-to-wire crimp
style PAL connectors.
Retainer
PAF Receptacle
(IDC style)
PA Shorouded header
(Top entry type)
Retainer
Retainer
PA Receptacle
(Crimp style Standard type)
PA Receptacle
(Crimp style Retainer mountable type)
PAF Receptacle
(IDC style)
PAL
(Crimp style Wire-to-wire)
PA Shorouded header
(Side entry type)
PA Shorouded header
(Top entry type)
Retainer
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
PA connector
(Standard type, Retainer mountable type)
• Highly reliable contact
The box contact supplies stable contact performance even under
conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
• Flanged press pin
Top entry type header has flanged press pins, preventing
accidental removal of the pins that might result from the
distorted unmating especially in the case of small No. of circuits.
PAF connector
• The industry’s first secure lock IDC connectors
By separating ID section and secure lock section, the industrys first
secure lock specification has been achieved for IDC that was said
to be impossible. Our fully automatic IDC machines, BCD-M5BP
(for simple harness) and CAM-M12B, SAD-M12E (for multi-
harness), can be applied for harness making.
• Metallic strain relief
Metallic strain relief on the contact securely grips wire insulation that
can avoid direct stress of vibration or impact. The same grip strength
as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points
The new four locking points design ensures wire retention force
of every direction that is almost superior to contact retention
force of crimp style connectors. It also completely covers
exposed terminated ID contact.
PAL connector
• The industry’s first wire to wire 2.0mm (.079")
pitch retainer mountable type connector.
• Either with or without panel lock can be
selected according to application.
61
www.DataSheet.in




SM05B-PASS-* pdf, 반도체, 판매, 대치품
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
Top entry type
(2 to 9 circuits)
Circuit No.1
5.3(.209)
(.020)
0.8(.031)dia.
1.5(.059)
(.079)
(10 to 15 circuits)
1.7(.067)
Circuit No.1
5.3(.209)
0.5(.020)
0.8(.031)dia.
1.5(.059)
(.079)
1.7(.067)
Circuits
2 (Note1)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Model No.
Without a boss
With a boss
B02B-PAFYK-A B02B-PAFYK-1A
B02B-PASK
B02B-PASK-1
B03B-PASK
B03B-PASK-1
B04B-PASK
B04B-PASK-1
B05B-PASK
B05B-PASK-1
B06B-PASK
B06B-PASK-1
B07B-PASK
B07B-PASK-1
B08B-PASK
B08B-PASK-1
B09B-PASK
B09B-PASK-1
B10B-PASK
B10B-PASK-1
B11B-PASK
B11B-PASK-1
B12B-PASK
B12B-PASK-1
B13B-PASK
B13B-PASK-1
B14B-PASK
B14B-PASK-1
B15B-PASK
B15B-PASK-1
B16B-PASK
B16B-PASK-1
Dimensions mm(in.)
AB
Q'ty /
box
2.0( .079) 6.0( .236) 1,000
2.0( .079) 6.0( .236) 1,000
4.0( .157) 8.0( .315) 1,000
6.0( .236) 10.0( .394) 1,000
8.0( .315) 12.0( .472) 500
10.0( .394) 14.0( .551) 500
12.0( .472) 16.0( .630) 500
14.0( .551) 18.0( .709) 500
16.0( .630) 20.0( .787) 500
18.0( .709) 22.0( .866) 500
20.0( .787) 24.0( .945) 250
22.0( .866) 26.0(1.024) 250
24.0( .945) 28.0(1.102) 250
26.0(1.024) 30.0(1.181) 250
28.0(1.102) 32.0(1.260) 250
30.0(1.181) 34.0(1.339) 250
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Glass-filled PBT, UL94V-0, natural (white)
(Note1) Nylon 66, UL94V-0, vivid yellow
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B02B-PASK-
S…natural (white)
K…black R…red E…blue M…green O…orange N…brown
P…purple PK…pink Y…yellow L…lemon yellow FY…vivid yellow
LE…light blue H…gray TR…tomato red
(16 circuits)
Circuit No.1
5.3(.209)
0.5(.020)
0.8(.031)dia.
1.5(.059)
(.079)
1.7(.067)
64
www.DataSheet.in

4페이지










SM05B-PASS-* 전자부품, 판매, 대치품
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Feeding direction
Feeding direction
Carrier tape
Cover tape leader
Leader part
The end part Connector 100(3.937)min.
160(6.299)min. mounting part 400(15.748)min.
[13(.512)dia.]
W1 + 2.5
- 1.0
( )+.098
- .039
± (.079±.020)
Top entry type
(2 to 5 circuits)
Feeding direction
(6 to 13 circuits)
Feeding direction
2.9±0.1
(.114±.004)
4.0±0.1 1.55±0.05
(.157±.004) (.061±.002)dia.
2.9±0.1
(.114±.004)
4.0±0.1 1.55±0.05
(.157±.004) (.061±.002)dia.
Cover tape
Carrier tape
Cover tape
Carrier tape
16.0±0.1
(.630±.004)
Side entry type
(2 to 5 circuits)
Feeding direction
4.0±0.1
(.157±.004)
2.0±0.1 1.55±0.05
(.079±.004) (.061±.002)dia.
Cover tape
16.0±0.1
(.630±.004)
(6 to 12 circuits)
Feeding direction
4.0±0.1
(.157±.004)
2.0±0.1 1.55±0.05
(.079±.004) (.061±.002)dia.
Carrier tape
Cover tape
Carrier tape
12.0±0.1
(.472±.004)
12.0±0.1
(.472±.004)
Circuits
Taping dimensions mm(in.) Reel dimensions mm(in.) Q'ty / reel
F S W W1 Top entry type Side entry type
2 to 5 11.5(.453)
24.0( .945) 25.5(1.004) 500 1,000
6, 7 14.2(.559) 28.4(1.118) 32.0(1.260) 33.5(1.319) 500 1,000
8 to 13 20.2(.795) 40.4(1.591) 44.0(1.732) 45.5(1.791) 500 1,000
Note:
1. Specifications conform to JIS C 0806. The tape width, connector loading
recess square hole dimensions, etc. are determined by the number of circuits
and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
67
www.DataSheet.in

7페이지


구       성 총 15 페이지수
다운로드[ SM05B-PASS-*.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
SM05B-PASS-*

CONNECTOR

JST
JST
SM05B-PASS-1-*

CONNECTOR

JST
JST

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵