Datasheet.kr   

ELJ-750-629 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 ELJ-750-629
기능 Jumbo-LED
제조업체 EPIGAP
로고 EPIGAP 로고 



전체 5 페이지

		

No Preview Available !

ELJ-750-629 데이터시트, 핀배열, 회로
Jumbo-LED
Radiation
Infrared
5,08
12
Type
4W
ELJ-750-629
20.11.2007
rev. 01
Technology
AlGaAs/AlGaAs
Case
Plastic lens, metal case
Description
High-power infrared LED in an aluminium case, with
thread socket for easy handling and heat sink
mounting
12
M10
Outline:
H = 12.4 mm (± 0.5)
D = 16 mm (± 0.5)
Thread M10
Pin 1 – cathode
Pin 2 – anode
Applications
Medical appliances, remote control and optical
communications, light barriers, measurement systems
Absolute Maximum Ratings
at Tamb = 25°C, on heat sink (S 200 cm²), unless otherwise specified
Parameter
Test сonditions
DC forward current
on heat sink
Peak forward current
Power dissipation
tp10 µs, f500 Hz
on heat sink
Operating temperature range
on heat sink
Storage temperature range
on heat sink
Junction temperature
on heat sink
Symbol
IF
IFM
P
Tamb
Tstg
Tj
Value
1.2
2.0
4
-25 to +100
-25 to +100
100
Unit
A
A
W
°C
°C
°C
Electrical Characteristics
Tamb = 25°C, unless otherwise specified
Parameter
Test
conditions
Symbol
Min
Typ Max
Unit
Forward voltage
IF = 350 mA
VF
1.9 2.5
V
Forward voltage*
IF = 1000 mA
VF
2.5 3
V
Switching time
IF = 350 mA
tr, tf
60
ns
Reverse voltage
IR = 10 µA
Thermal resistance
junction-case
*only recommended on optimal heat sink
VR
RthJC
5
10
K/W
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer.
EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201
Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545
1 of 5
www.DataSheet.in




ELJ-750-629 pdf, 반도체, 판매, 대치품
Jumbo-LED
ELJ-750-629
20.11.2007
rev. 01
Remarks concerning optical radiation safety*
At low forward current (<150 mA), and continuous operation, this LED may be classified as LED
product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin
under reasonably predictable conditions. This implicates a direct observation of the light beam by
means of optical instruments.
When driven with higher continuous forward current, (up to 1 A), this product should be classified as
LED product Class 1M , according to standard IEC 60825-1:A2. Class 1M products are safe to eyes
and skin under normal conditions, including when users view the light beam directly. Class 1M
products produce either a highly divergent beam or a large diameter beam,so only a small part of the
whole light beam can enter the eye. However, such optical products can be harmful to the retina if
the beam is viewed using magnifying optical instruments. Therefore, users should not incorporate
optics that could concentrate the output into the eyes.
If intended to operate at very high continuous current (>1 A), this product has to be (potentially)
classified as Class 3B LED. Class 3B LEDs may have sufficient power to cause an eye injury, both
from the direct beam and from reflections,so these products are therefore considered hazardous to
the eye. However, the extent and severity of any eye injury arising from an exposure to the light
beam of a Class 3B product will depend upon several factors including the radiant power entering
the eye and the duration of the exposure. Nontheless, adequate precautions should be taken to
avoid direct or indirect viewing into the beam.
*Note: Safety classification of an optical component mainly depends on the intended application and
the way the component is being used. Furthermore, all statements made to classification are based
on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed
current or altering the light beam with additional optics may lead to different safety classifications.
Therefore these remarks should be taken as recommendation and guideline only.
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer.
EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201
Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545
4 of 5
www.DataSheet.in

4페이지













구       성총 5 페이지
다운로드[ ELJ-750-629.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
ELJ-750-629

Jumbo-LED

EPIGAP
EPIGAP

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵